• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.23 no.4
• /
• pp.1-11
• /
• 2020

This study aimed to develop the HSI (Habitat Suitability Index) model of Cypripedium guttatum. and to verify this model by applying to the candidate sites for replacement habitat. The development of HSI and SI (Suitability Index) model was conducted based on the existing literature, field surveys, and expert opinions for information on ecological habitat characteristics. Seven variables were selected as habitat variables including mean maximum temperature in Jul.-Aug., lighting, slope, altitude, effective soil depth, soil texture, and artificial overexploitation (i.e. protected areas). HSI model was developed for C. guttaum based on these variables. This HSI model showed high applicability to selection and evaluation of replacement habitats for C. guttaum. Our findings could provide the basic information on habitat assessment to prevent the extinction of endangered C. guttatum. However, since there is a limitation that the survey data were insufficient, further field surveys should be conducted on several habitat types to improve the accuracy of the HSI model.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.91-94
• /
• 2006

KORDI(Korea Ocean Research & Development Institute) built a research vessel JANG-MOK with 40 G/T for a survey and observation of oceanographic environmental characteristics at coastal region in September 2005. This paper introduced the implementation for hardware and software of an integrated information network that loaded in JANG-MOK, and depicted the function of an integrated information network, such as an installation of ga-bit based network, RS232C serial & UDP network interface of instruments, a data logging software of measured data, Hawkeye II software for supporting the efficient survey works, and a real-time navigation viewer. In addition, we presents the another implementation method for an integrated information network of oceanographic research vessels.

• Journal of KIISE:Information Networking
• /
• v.37 no.6
• /
• pp.489-493
• /
• 2010

In an indoor localization method taking the lateration-based approach, the distance between a target and an AP (Anchor Point) is estimated using RSS (Received Signal Strength) measurements. Since the characteristics of a radio signal randomly vary in time and space, errors are unavoidable in distance estimation with measured RSS. Since the accuracy of distance estimation affects the localization accuracy of a lateration-based method, additional APs hearing a target have been used for localization in the literature. However, lots of experimental results show that the accuracy of a lateration-based method is improved by using carefully selected APs measuring the high quality RSSs which the distances estimated is close to the actual distances between nodes as reference APs, not using merely more APs. In this paper, we focus on selection method of reference AP and distance estimation method reflecting on environmental dynamics. We validate our method by implementing an indoor localization system and evaluating the accuracy of our method in the various experimental environments.

• Korean Journal of Materials Research
• /
• v.27 no.6
• /
• pp.331-338
• /
• 2017

This study was carried out to investigate the optimum condition of a friction stir welding process for a joint of AA2219-T87 and AA2195-T8 dissimilar aluminum alloys. These alloys are known to have good cryogenic properties, and as such to be suitable for use in fuel tanks of space vehicles. The welding parameters include the travelling speed, rotation speed and rotation direction of the tool. The experiment was conducted under conditions in which the travelling speed of the tool was 120-300 mm/min and the rotation speed of the tool was 400-800 rpm. To investigate the effect of the rotation direction of the tool, the joining was performed by switching the positions of the two dissimilar alloys. After welding, the microstructure was observed and the micro-hardness were measured; non-destructive evaluation was carried out to perform tensile tests on defect-free specimens. The result was that the microstructure of the weld joint underwent dynamic recrystallization due to sufficient deformation and frictional heat. The travelling speed of the tool had little effect on the properties of the joint, but the properties of the joint varied with the rotation speed of the tool. The conditions for the best joining properties were 600 rpm and 180-240 mm/min when the AA2219-T8 alloy was on the retreating side(RS).

• Journal of Korea Water Resources Association
• /
• v.36 no.1
• /
• pp.117-128
• /
• 2003

The objectives of this study are to develop the total maximum daily loads simulation system, TOLOS that is capable of estimating annual nonpoint source pollution from small watersheds, to monitor the hydrology and water quality of the Balkan HP#6 watershed, and to validate TOLOS with the field data. TOLOS consists of three subsystems: the input data processor based on a geographic information system, the models, and the post processor. Land use pattern at the tested watershed was classified from the Landsat TM data using the artificial neutral network model that adopts an error back propagation algorithm. Paddy field components were added to SWAT model to simulate water balance at irrigated paddy blocks. SWAT model parameters were obtained from the GIS data base, and additional parameters calibrated with field data. TOLOS was then tested with ungauged conditions. The simulated runoff was reasonably good as compared with the observed data. And simulated water quality parameters appear to be reasonably comparable to the field data.

• Korean Journal of Materials Research
• /
• v.7 no.3
• /
• pp.213-217
• /
• 1997

AOhf(Hcousto-r)l)tic niodulator) with :!OOlIiz freclucncl- and Sfi(;(Seconrl harmonic generation) green lasel-Lvith 53% nm wavelength were used for Il\'IIII~Dii.it,ii v~ilco disk recorder) FOI rhe appli~aptin of high densit]. optical recording, a high po\ver I ~ c r is r c ~ ~ l i ~ i l - u l ic I !tic. s\-sti,m a n d optic.,~I io;iting l,t)c>rs of each optical device must have a high laser damage threshoid hie rn;itie ant] retlwtive coatings on a $TeO_{2}$ singlc crystal. which is used as an acoustooptic material, by E-beam evaporation method. Laser damage threshold \vas nicdsureci hy Ar laser with the input power oi 0.55LV 1,aser damage threiholti 01 $ZrO_{2}$ and $SiO_{2}$. filn-is were higher than $AI_{2}O_{3}$ f i l m U'e also investigated a long--tern1 stability of the output po\ver of St{(; green laser

• Korean Journal of Microbiology
• /
• v.54 no.1
• /
• pp.87-89
• /
• 2018

Flavisolibacter tropicus $LCS9^T$ was isolated from a soil sample collected from tropical zone within the Ecorium of the National Institute of Ecology in Seocheon, central-western Korea. In this study, we report the complete genome sequence of the bacterium Flavisolibacter tropicus $LCS9^T$, which possesses a circular chromosome comprised of 5, 940,863 bp with the G + C mol content of 41.5%. The genome sequence annotation showed that the complete genome includes 5,075 genes, 337 pseudogenes, and 59 rRNA genes. The radiation resistance genes such as excinuclease UvrABC complex and UvdE were present in the genome.

• Journal of Korea Society of Industrial Information Systems
• /
• v.11 no.2
• /
• pp.18-28
• /
• 2006

We consider a Direct Input Output Manufacturing System(DIOMS) which has a munber of machine centers placed along a built-in Automated Storage/Retrieval System(AS/RS). The Storage/Retrieval (S/R) machine handles parts placed on pallets for the operational aspect of DIOMS and determines the optimal operating policy by combining computer simulation and genetic algorithm. The operational problem includes: input sequencing control, dispatching rule of the S/R machine, machine center-based part type selection rule, and storage assignment policy. For each operating policy, several different policies are considered based on the known research results. In this paper, using the computer simulation and genetic algorithm we suggest a method which gives the optimal configuration of operating policies within reasonable computation time.

• The Journal of the Korea Contents Association
• /
• v.9 no.6
• /
• pp.436-443
• /
• 2009

There have been rapid increases to the demands for modeling diverse and complex spatial phenomena and utilizing spatial data through the computer across all the aspects of society. As a result, the importance and utilization of remote sensing and GIS's(geographic information systems) have also increased. It can produce digital data of enormous accuracy and value by incorporating remote sensing images into GIS analysis technology and make various thematic maps by classifying and analyzing land cover. Once such a map is made for the target area, it can easily do modeling and constant monitoring based on the map, revise the database with ease, and thus efficiently update geo-spatial information. Under the goal of analyzing changes to land cover along the road by combining the remote sensing and GIS technology, this study classified land cover from the images of two periods, detected changes to the six classes over ten years, and obtained statistics about the study area's quantitative area changes in order to provide basic decision making data for urban planning and development. By analyzing land use along the road, one can set up plans for the area along the road and the downtown to supplement each other.

• Smart Structures and Systems
• /
• v.2 no.2
• /
• pp.115-126
• /
• 2006

The Terra-Scope system is an affordable 4-D down-hole seismic monitoring system based on independent, microprocessor-controlled sensor Pods. The Pods are nominally 50 mm in diameter, and about 120 mm long. They are expected to cost approximately $6000 each. An internal 16-bit, extremely low power MCU controls all aspects of instrumentation, eight programmable gain amplifiers, and local signal storage. Each Pod measures 3-D acceleration, tilt, azimuth, temperature, and other parametric variables such as pore water pressure and pH. Each Pod communicates over a standard digital bus (RS-485) through a completely web-based GUI interface, and has a power consumption of less than 400 mW. Three-dimensional acceleration is measured by pure digital force-balance MEMS-based accelerometers. These accelerometers have a dynamic range of more than 115 dB and a frequency response from DC to 1000 Hz with a noise floor of less than $30ng_{rms}/{\surd}Hz$. Accelerations above 0.2 g are measured by a second set of MEMS-based accelerometers, giving a full 160 dB dynamic range. This paper describes the system design and the cooperative shared-time scheduler implemented for this project. Restraints accounted for include multiple data streams, integration of multiple free agents, interaction with the asynchronous world, and hardened time stamping of accelerometer data. The prototype of the device is currently undergoing evaluation. The first array will be installed in the spring of 2006.