• 한국항공우주학회지
• /
• 제40권10호
• /
• pp.840-845
• /
• 2012

본 논문에서는 후향계단(Backward Facing Step) 유동장의 유동운동에 대한 ARX(Auto Regressive eXogenous) 모델링 기법을 제시한다. BFS 유동장 모델링을 위해 밀도를 모드분석을 통해 고유 공간모드와 시간계수를 추출한다. 입력 차수와 상태변수 차수는 각각 유동장 스팩트럼 분석과 시간계수 분석을 통해 결정한다. 또한, 유동장의 속도 분석을 통해 ARX의 입력 지연 차수를 결정한다. 한편, ARX 모델의 계수는 신경망을 이용하여 설계한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.30-34
• /
• 1997

This paper Describe a modelling method for SCR(selective Catalytic reduction) system in refuse incineration plant. We consider the SCR system as a single input single output system. For modelling the SCR system, an auto regressive exogeneous(ARX) modelling method is used. In this case, we should design the white noise input for modelling and put it on the system as an input (.NH/sap2/.), and taken an outlet NOx as an output. From these two relations, we design the ARX model with 45 second delay time and transform to discrete system with 0.5 sampling time. Using the obtained SCR model, we simulate the SCR system to reduce the outlet NOx content by a conventional PID control method.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1213-1216
• /
• 1996

This paper describes a precise temperature control method for refrigerating and air conditioning systems. The control technique is based on the optimal servo control design method and the control algorithm is implemented on a personal computer. To control the precise temperature, two actuators such as an inverter for the compressor speed control and a stepping motor for regulating the expansion valve are used. The superheat and evaporator temperatures are chosen as the system output. So a multivariable system which has two inputs and two outputs to be controlled. The complicative model is identified by using an ARX(Auto Regressive eXogenous) model and the controller is designed by using the Matlab software.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2017년도 전력전자학술대회
• /
• pp.126-127
• /
• 2017

An accurate State Of Charge (SOC) estimation of battery is the most important technique for Electric Vehicles (EVs) and Energy Storage Systems (ESSs). In this paper a new integrated Unscented Kalman Filter-Particle Filter (UKF-PF) is employed to estimate the SOC of a $LiFePO_4$ battery cell and a significant improvement is obtained as compared to the other methods. The parameters of the battery is modeled by the second order Auto Regressive eXogenous (ARX) model and estimated by using Recursive Least Square (RLS) method to calculate value of each element in the model. The proposed algorithm is established by combining a parameter identification technique using RLS method with ARX model and an SOC estimation technique using UKF-PF.

• Earthquakes and Structures
• /
• 제8권4호
• /
• pp.843-857
• /
• 2015

System identification is regarded as the most basic technique for structural health monitoring to evaluate structural integrity. Although many system identification techniques extracting mode information (e.g., mode frequency and mode shape) have been proposed so far, it is also desired to identify physical parameters (e.g., stiffness and damping). As for high-rise buildings subjected to long-period ground motions, system identification for evaluating only the shear stiffness based on a shear model does not seem to be an appropriate solution to the system identification problem due to the influence of overall bending response. In this paper, a system identification algorithm using a shear-bending model developed in the previous paper is revised to identify both shear and bending stiffnesses. In this algorithm, an ARX (Auto-Regressive eXogenous) model corresponding to the transfer function for interstory accelerations is applied for identifying physical parameters. For the experimental verification of the proposed system identification framework, vibration tests for a 3-story steel mini-structure are conducted. The test structure is specifically designed to measure horizontal accelerations including both shear and bending responses. In order to obtain reliable results, system identification theories for two different inputs are investigated; (a) base input motion by a modal shaker, (b) unknown forced input on the top floor.

• 대한토목학회논문집
• /
• 제38권2호
• /
• pp.349-356
• /
• 2018

본 논문은 국내에서 연구가 미진한 적재설비의 지진 취약도 평가에 적용할 수 있는 FE 해석 기반의 연결부 모델을 개발하는데 목적이 있다. 이러한 목표를 달성하기 위하여, 적재설비 거동을 파악하기 위한 진동대 실험과 Modal Test, 그리고 구성 부재를 대상으로 한 다양한 부재실험(8가지 Push-over Test)을 진행하였다. 실험결과를 바탕으로 지진취약도 평가에 적용하기 위한 적재설비의 연결부 모델을 개발하기 위하여, NX-Nastran 프로그램을 활용하여 연결부의 상세 모델링을 진행하였다. 특히, 단순 걸쇠 방식으로 연결되는 기둥 부재와 보 부재의 연결을 모사하기 위하여 면대면 표면접촉 요소와 스프링 요소를 적용하였으며, 스프링 요소의 모델은 ARX (Auto Regressive eXogenous) 기반의 수학적 모델을 개발하여 적용하였다. FE 모델 기반의 simulation 결과는 부재 실험 결과와 비교하였을 때, 상호 오차율 8% 미만의 우수한 신뢰도를 보여주었다. 결과적으로 연구에서 개발한 FE해석 기반의 연결부 모델은 적재설비의 지진 취약도 평가를 위한 해석 모델에 활용될 수 있음을 확인하였다.

• Earthquakes and Structures
• /
• 제8권4호
• /
• pp.915-934
• /
• 2015

Within the context of Structural Health Monitoring (SHM), it is often the case that structural systems are described by uncertainty, both with respect to their parameters and the characteristics of the input loads. For the purposes of system identification, efficient modeling procedures are of the essence for a fast and reliable computation of structural response while taking these uncertainties into account. In this work, a reduced order metamodeling framework is introduced for the challenging case of nonlinear structural systems subjected to earthquake excitation. The introduced metamodeling method is based on Nonlinear AutoRegressive models with eXogenous input (NARX), able to describe nonlinear dynamics, which are moreover characterized by random parameters utilized for the description of the uncertainty propagation. These random parameters, which include characteristics of the input excitation, are expanded onto a suitably defined finite-dimensional Polynomial Chaos (PC) basis and thus the resulting representation is fully described through a small number of deterministic coefficients of projection. The effectiveness of the proposed PC-NARX method is illustrated through its implementation on the metamodeling of a five-storey shear frame model paradigm for response in the region of plasticity, i.e., outside the commonly addressed linear elastic region. The added contribution of the introduced scheme is the ability of the proposed methodology to incorporate uncertainty into the simulation. The results demonstrate the efficiency of the proposed methodology for accurate prediction and simulation of the numerical model dynamics with a vast reduction of the required computational toll.