• 한국항해학회지
• /
• 제19권2호
• /
• pp.23-75
• /
• 1995

A major change occuring in the workplace is the willingness of union leaders, managers, and workers to experiment with various work schedules and to work toward the improvement in the QWL(quality of work life). In this study, the writer measures the level of QWL, embodies components of QWL, testifies the difference of QWL according to the demographical traits, and develops some scales to measure QWL in merchant ships. To achieve objectives of the paper, 11 hypotheses were established and a questionnaire was used, 894 proper data was obtained from 2, 910 Korean seamen working in merchant ships. Results of analyses are as follows : 1) The components of QWL in merchant ships are job, employee satisfaction, wage, welfare, working condition, supervise, colleague relations, initiative, and organization management. 2) Seamen of merchant ships are satisfied with job, supervise, colleague relations, and organization management. They are dissatisfied employee satisfaction, wage, welfare, and working condition. 3) According to demographical traits, the number of the factors significant difference(P<0.05) among components of QWL are 9 for type of ships, 8 ages of seamen, 7 for married or single, nationality of ships, and education level respectively, 5 for seamen career, for 4 rank on board and trading route of ships respectively, 2 for whether union or not and whether union involvement or not respectively, and 1 for department on board. 4) Results which tested hypotheses are as follows : For the components of QWL, married men are more satisfactory than an unmarried men, officers are more dissatisfactory than ratings, old men are more satisfactory than young men, men in high education level are more dissatisfactory than men in low education level, those who are much careers as a seaman are more satisfactory than those who are little careers as a seaman. There are significant differences in the components of QWL according to nationality and type of ships. There are insignificant differences in the components of QWL according to the shipboard department, whether union is or not, whether union involvement is or not, and trading route of ships.

• 자원환경지질
• /
• 제3권4호
• /
• pp.199-222
• /
• 1970

One of the biggest sulfide metallic (Cu, Pb, Zn) ore deposits of South Korea is located in the area of Seo-myeon, Shiheung-gun, Gyeonggi-do. Geology of the region is mostly composed of metasediments of biotite schist, graphite schist, injection gneiss, sericite schist, limesilicate and quartzite from bottom, those are applicable to so-called Yeoncheon System of Pre-Cambrian, and granodiorite, quartz porphyry, basic dykes are outcroped in a small scope as intrusives. The origin of the ore deposit is pyrometasomatic contact deposits due to hydrothermal replacement and the ore bodies are imbedded in lower bed of limesilicate formation as impregnation and ore minerals are galena, sphalerite, marmatite, chalcopyrite, bornite, chalcocite, covellite, and the later two minerals are both hypogene and supergene. Gangue minerals are mostly skarn minerals those hornblende, diopside, epidote, hedenbergite, chlorite, garnet and quartz except primary calcite and quartz. Boundary plane (NS strike) between schists and limesilicate seemed to be primary opening of ore solution and fractures bearing $N50^{\circ}{\sim}80^{\circ}W$ are secondary structural control for localization of ore minerals and the third structural controls are both irregular gashes and schistosity in small scale. Photogeological study was carried with vertical aerial photo scaled 1: 38,000 and enlarged 1 : 10,000 under stereoscope. The study on the area convinced the fact that the geologic boundaries between rocks, limesilicates and quartzites, are traced easily by their typical topographic feature and drainage, and the main fracture patterns which derived from the result of fracture traces, that photogeologic lineament observed under stereoscope, are those bearing (1) $N20^{\circ}W$, (2) $N58^{\circ}W$, (3) $N76^{\circ}W$, (4) EW, (5) $N20^{\circ}W$, (6) $N62^{\circ}W$, (7) $N77^{\circ}W$. Among the written fractures, (5) (not schistosity, in case of fault) (6) (7) are post-mineral faults and others are pre-mineral faults and others are pre-mineral structures, and (2) (3) (6) (7) are coincided with statistical figure of 208 fractures surveyed in underground. By the result of the study, mineralized zone, are presumed to extend north and southward, total length about 4km.

• 한국문헌정보학회지
• /
• 제22권
• /
• pp.219-257
• /
• 1992

Among the Chinese Characters originated in Japan, some of them are very ancient in their origin and others come to exist as different forms by being used widely in forged books in Chinese. These Characters can be divided into three groups. First, the Chinese Characters whose forms are different. Most of these are 'hoiui' (회의)character, being made by imitating the forms of the original Chinese Letters. These characters do have meaning but not pronunciation. This is one distinct feature of Chinese Characters originated in Japan. Second, the Chinese Characters whose meaning has been assigned by the Japanese people. These letters can be grouped into two. One is the letters whose meanings are entirely different from original Chinese Characters, and the other is the letters whose meanings are not known although their pronunciations are known. It can be explained that the letters with different forms are made because of the ignorance of letter's existence. Or, the letters were made on purpose in ordoer to be used in different meanings. Third, the Characters with a partial modification of original Chinese Characters. Among the Characters in three groups above, pure Japanese-made Chinese Characters are those in group one and three since those in group two are Chinese Letters whose meanings (or pronunciation) only are Japanese. As a results of detailed investigation of pure Japanese-made Chinese Character in JIS X 0208-1990, the followings are discovered: 1. Pure Japanese-made Chinese Characters are 147 in numbers. 2. The Characters which were originally Chinese but now considered to be Japanese-made are 5 in numbers. Among these letters, 39 Characters are not listed in TaeHanHwaSaJon(Whose fame is well known as the authoritative dictionary of Chinese Characters), 47 Characters are not found in the dictionaries of Chinese Characters compiled in Korea. 3. 14 Characters seem to be Japanese-made Chinese Characters although it cannot be said so with accuracy because of various meanings found in several dictionaries of Chinese Characrters.

• Bulletin of the Korean Chemical Society
• /
• 제10권4호
• /
• pp.382-388
• /
• 1989

The approximate rates and stoichiometry of the reaction of excess potassium tri-sec-butylborohydride ($K_s-Bu_3BH$) with selected organic compounds containing representative functional groups were determined under the standard conditions (0$^{\circ}C$, THF) in order to define the characteristics of the reagent for selective reductions. Primary alcohols evolve hydrogen in 1 h, but secondary and tertiary alcohols and amines are inert to this reagent. On the other hand, phenols and thiols evolve hydrogen rapidly. Aldehydes and ketones are reduced rapidly and quantitatively to the corresponding alcohols. Reduction of norcamphor gives 99.3% endo- and 0.7% exo-isomer of norboneols. The reagent rapidly reduces cinnamaldehyde to the cinamyl alcohol stage and shows no further uptake of hydride. p-Benzoquinone takes up one hydride rapidly with 0.32 equiv hydrogen evolution and anthraquinone is cleanly reduced to the 9,10-dihydoxyanthracene stage. Carboxylic acids liberate hydrogen rapidly and quantitatively, however further reduction does not occur. Anhydrides utilize 2 equiv of hydride and acyl chlorides are reduced to the corresponding alcohols rapidly. Lactones are reduced to the diol stage rapidly, whereas esters are reduced moderately (3-6 h). Terminal epoxides are rapidly reduced to the more substituted alcohols, but internal epoxides are reduced slowly. Primary and tertiary amides are inert to this reagent and nitriles are reduced very slowly. 1-Nitropropane evolves hydrogen rapidly without reduction and nitrobenzene is reduced to the azoxybenzene stage, whereas azobenzene and azoxybenzene are inert. Cyclohexanone oxime evolves hydrogen without reduction. Phenyl isocyanate utilizes 1 equiv of hydride to proceed to formanilide stage. Pyridine and quinoline are reduced slowly, however pyridine N-oxide takes up 1.5 equiv of hydride in 1 hr. Disulfides are rapidly reduced to the thiol stage, whereas sulfide, sulfoxide, sulfonic acid and sulfone are practically inert to this reagent. Primary alkyl bromide and iodide are reduced rapidly, but primary alkyl chloride, cyclohexyl bromide and cyclohexyl tosylate are reduced slowly.

• ETRI Journal
• /
• 제15권3_4호
• /
• pp.47-59
• /
• 1994

A capacity expansion planning problem with buy-or-lease decisions is considered. Demands for capacity are deterministic and are given period-dependently at each period. Capacity additions occur by buying or leasing a capacity, and leased capacity at any period is reconverted to original source after a fixed length of periods, say, lease period. All cost functions (buying, leasing and idle costs) are assumed to be concave. And shortages of capacity and disposals are not considered. The properties of an optimal solution are characterized. This is then used in a tree search algorithm for the optimal solution and other two algorithms for a near-optimal solution are added. And these algorithms are illustrated with numerical examples.

• 전기의세계
• /
• 제14권1호
• /
• pp.26-34
• /
• 1965

The radiation patterns and impedance of the half wave solt on the wide side of rectangular wave guide are analyzed. The measuring methods and procedures are described. And that the experimental data of the pattern and impedance of the slot are presented which are consistent with the theoretical values. The causes of error are also considered and are believed to be tolerable for the pattern and input impedance measurements. The usefulness of the slot antenna tested are also described.

• 호남수학학술지
• /
• 제44권4호
• /
• pp.594-617
• /
• 2022

In this study, firstly Smarandache ruled surfaces whose base curves are Smarandache curves derived from Frenet vectors of the curve, and whose direction vectors are unit vectors plotting Smarandache curves, are created. Then, the Gaussian and mean curvatures of the obtained ruled surfaces are calculated separately, and the conditions to be developable or minimal for the surfaces are given. Finally, the examples are given for each surface and the graphs of these surfaces are drawn.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.939-942
• /
• 2007

Vacuum cleaner is a close life product that can remove various dusts from our surroundings. However well vacuum cleaner clean our environments, many people are looking away from it, due to its loud noise. Its noise causes a big trouble in the usual life, for example, catch calls, TV watching and discussing etc. To reduce these inconveniences, noise reduction methods and systematic design of low noise vacuum cleaner are studied in this paper. At first, sound quality investigation is performed to get the noise level and quality that make people TV watching and catch calls available. Based on the European and domestic customer SQ survey result, sound power, peak noise level and target sound spectrum guideline are studied and introduced. As a second, precise product sound spectrums are designed into each part based on the sound quality result. Fan-motor, brush, mainbody, cyclone spectrums are decided to get the final target sound based on the contribution level. Fan-motor is the major noise source of vacuum cleaner. Specially, its peak sound, RPM peak and BPF Peak, cause the people nervous. To reduce these peak sounds, high rotating impeller and diffuser are focused due to its interaction. A lot of experimental and numerical tests, operation points are investigated and optimization of flow path area between diffusers is performed. As a bagless device, cyclones are one of the major noise sources of vacuum cleaner. To reduce its noise, previous research is used and adopted well. Brush is the most difficult part to reduce noise. Its noise sources are all comes from aero-acoustic phenomena. Numerical analysis helps the understanding of flow structure and pattern, and a lot of experimental test are performed to reduce the noise. Gaps between the carpet and brush are optimized and flow paths are re-designed to lower the noise. Reduction is performed with keeping the cleaning efficiency and handling power together and much reduction of noise is acquired. With all above parts, main-body design is studied. To do a systematic design, configuration design developments technique is introduced from airplane design and evolved with each component design. As a first configuration, fan-motor installation position is investigated and 10 configuration ideas are developed and tested. As a second step, reduced size and compressed configuration candidates are tested and evaluated by a lot of major factor. Noise, power, mass production availability, size, flow path are evaluated together. If noise reduction configuration results in other performance degrade, the noise reduction configuration is ineffective. As a third configuration, cyclones are introduced and the size is reduced one more time and fourth, fifth, sixth, seventh configuration are evolved with size and design image with noise and other performance indexes. Finally we can get a overall much noise level reduction configuration. All above investigations are adopted into vacuum cleaner design and final customer satisfaction tests in Europe are performed. 1st grade sound quality and lowest noise level of bagless vacuum cleaner are achieved.

• Advances in aircraft and spacecraft science
• /
• 제1권3호
• /
• pp.253-271
• /
• 2014

A linearised buckling analysis of thin-walled beams is addressed in this paper. Beam theories formulated according to a unified approach are presented. The displacement unknown variables on the cross-section of the beam are approximated via Mac Laurin's polynomials. The governing differential equations and the boundary conditions are derived in terms of a fundamental nucleo that does not depend upon the expansion order. Classical beam theories such as Euler-Bernoulli's and Timoshenko's can be retrieved as particular cases. Slender and deep beams are investigated. Flexural, torsional and mixed buckling modes are considered. Results are assessed toward three-dimensional finite element solutions. The numerical investigations show that classical and lower-order theories are accurate for flexural buckling modes of slender beams only. When deep beams or torsional buckling modes are considered, higher-order theories are required.

• 대한조선학회논문집
• /
• 제49권2호
• /
• pp.164-173
• /
• 2012

Landing ship tank with well dock has the important mission transferring troops or landing equipments from sea to shore. Such transfers are usually carried out using landing crafts, which are loaded or unloaded in flooded well dock. In this situation, as relative motions are occur between well dock and landing craft, safety verifications are demanded. In this paper, seakeeping and safety performances are investigated through model test. First of all, well dock dimensions are reviewed and model tests are performed with sea state 3&4 in 180degree wave direction. Model tests are conducted for three relative positions and seakeeping performances are investigated each position.