• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.143-146
• /
• 2008

With unexpected torrential rainfall, flash flooding is occurring frequently and its impacts are tremendous. Thus proper natural disaster management plans are required. The disaster management system of the Bimodal tram utilizes the SWMM as a core engine to simulate runoff and urban sewer networks for flooding simulation. To develop the efficient Bimodal tram disaster management system, very detailed subcatchment boundaries and flow networks have to be developed in a GIS data format. Thus the objective of this study is to develop ArcView GIS based module (AV2SWMM) for easy preparation of model input for the tram disaster management system. With the AV2SWMM module, very detailed subcatchment boundaries and flow networks can be developed for accurate simulation of flash flooding at the study site, which were not/hardly possible with SWMM 5.0 interface. The AV2SWMM can be used in developing accurate model input for other regions where the Bimodal tram system is expected to be introduced.

• 연구논문집
• /
• s.28
• /
• pp.219-227
• /
• 1998

In order to investigate the interfacial structure between TiN and iron nitride, an AISI 4140 steel was nitrided to form a layer of thickness 15$\mum$ by DC ion nitriding, then the surface was bombarded with Ti ions and subsequently coated a TiN film of 5$\mum$ by arc ion plating method. The interfacial microstructure between TiN and iron nitride was characterized by optical microscope, SEM and XRD. So called black layer was observed in the duplex treatment. It was resulted from the decomposition of iron nitride during the bombardment. Its thickness was increased with increasing bombardment time at high bias voltage. But the thickness was greatly decreased when the iron nitride was bombarded with a nitrogen gas or at a reduced bias voltage. The adhesion strength of the top TiN coating was decreased with increasing thickness of the black layer. Furthermore, the reduced adhesion strength in this system was discussed in view of the interfacial structural relationship between TiN and iron nitride.

• Journal of Welding and Joining
• /
• v.32 no.2
• /
• pp.14-17
• /
• 2014

Ferritic stainless steels are widely used in the construction industry and in exhaust manifolds due to their low cost and relatively superior stress corrosion cracking resistance and pitting corrosion resistance compared to austenite stainless steels. Ferritic stainless steels are currently welded by various welding process including gas tungsten arc welding (GTAW), electron resistance welding (ERW) and laser beam welding. However, when these stainless steels are welded by fusion welding, some problems occur in the fusion zone (FZ) and heat affected zone (HAZ). First, the ductility of the weld is reduced due to the grain growth in the FZ and HAZ. Second, as its HAZ is frequently sensitized during welding, corrosion resistance deteriorates in this region due to the Cr depletion zone. To prevent these problems, it is recommended that ferritic stainless steels be welded with a low heat input. In this study, recent researches in the view of friction stir welded ferritic stainless steels are briefly reviewed.

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.3
• /
• pp.85-93
• /
• 2015

This paper mainly introduces the methods of extracting landslide information using ALOS(Advanced Land Observing Satellite) images and GIS(Geographical Information System) technology. In this study, we classified images using three different methods which are the unsupervised the supervised and the PCA(Principal Components Analysis) for extracting landslide information based on characteristics of ALOS image. From the image classification results, we found out that the quality of classified image extracted with PCA supervised method was superior than the other images extracted with the other methods. But the accuracy of landslide information extracted from this image classification was still very low as the pixels were very similar between the landslide and safety regions. It means that it is really difficult to distinguish those areas with an image classification method alone because the values of pixels between the landslide and other areas were similar, particularly in a region where the landslide and other areas coexist. To solve this problem, we used the LSM(Landslide Susceptibility Map) created with ArcView software through weighted overlay GIS method in the areas. Finally, the developed LSM was applied to the image classification process using the ALOS images. The accuracy of the extracted landslide information was improved after adopting the PCA and LSM methods. Finally, we found that the landslide region in the study area can be calculated and the accuracy can also be improved with the LSM and PCA image classification methods using GIS tools.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.2
• /
• pp.19-27
• /
• 2001

All accurate and efficient antenna feed model is very important for computing GPR response using the FDTD method In literature, there are several feed models such as the equivalent network in angular-frequency domain, 1-D transmission-line cell， voltage boundary condition in time domain, etc. In this paper, theoretical relationship among the models is investigated. It is found that the above three models become equivalent when a short and lossless feed line can match with its connected transmitter receiver). In view of accuracy and efficiency of the simulation, the FDTD results according to the feed models arc compared with the measured data of the receiving responses for an actual GPR system.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.1
• /
• pp.57.3-58
• /
• 2016

We analyze an optical system of a telescope based on Fresnel type objective lens as suggested by Hyde (1999). The Fresnel objective lens can be thin, light-weight and foldable, and therefore it is possible to develop a space telescope with an aperture larger than that of traditional telescopes. Moreover a lens, whatever it is either Fresnel type or conventional, allows much larger fabrication tolerances. We design a medium-sized telescope adopting Fresnel lens as an objective lens for use in space and possibly on the ground. The well-known chromatic aberration of the Fresnel primary lens is corrected by a field lens and another Fresnel lens using Schupmann method. An additional lens is used for forming images. We analyze the chromatic and off-axis aberrations of the proposed system analytically and suggest methods for the minimization of off-axis aberrations and for the operation in wider spectral range. We also conduct ray tracing and optimize the whole optical system with commercial software. Finally we present the design parameters of a telescope with an aperture of 0.5 to 1 meters, enabling diffraction limited operation for a moderate field of view about 10 arc-minutes.

• Resources Recycling
• /
• v.6 no.4
• /
• pp.3-10
• /
• 1997

Electric are furnace dust (EAF dust) generated in steel production based on scrap melting is contained Zn and Fe about 25 and 30 percent by weight, respectively. From a metallurgical point of view, the dust could be regarded as a raw material for Zn and Fe source. To recover the Zn in the metal from EAF dust, many system are proposed such as Arc Plasma Furmace and Pb splasher method. In this study, to recover high purity Zn from Pb splasing alloy, Zn distillation is carried out at the temperature of 1123, 1173, 1223, 1273 K, the gas flow rate of 2.5, 5.0, 8.0 Ni/min and the distilling time of 10, 30, 60, 90 minutes. The main results obtained from this study are as follows:(1) The amount of evaporated Zn and its evaporating rate increased with increasing temperature, but purity of Zn decreased with increasing temperature. Optimum temperature range was found out to be between 1173∼1223K. (2) The amount of evaporated Zn and evaporation rate increased with increasing gas flow rate at a given temperature and distillation time. Gas flow rate has more influence over the amount of evaporated Zn and evaporation rate with increasing temperature.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1721-1728
• /
• 2010

본 연구의 목적은 USLE 모형의 적용 범위 확장에 따른 모형의 적정성을 평가하는 데에 있다. 본 연구는 300 $km^2$ 정도의 유역면적을 갖는 만경강 봉동 수위관측소 유역에서 유사유출량을 모의한 후 이를 실측치와 비교 분석하는 과정으로 수행되었다. USLE 모형의 주요 인자 등은 객체지향프로그램인 ArcView를 이용하여 산정하였으며, 이를 강우침식인자, 토양침식인자, 지형인자, 식생피복인자, 침식조절인자 등과 같은 주제도에 격자기반($30m{\times}30m$)으로 구현하였다. 본 연구의 대상유역에서 모의된 2009년 평균토양침식량은 206.7 $ton/km^2/year$이며, 토양침식량에 Vanoni(1975)와 Boyce(1975), USDA(1972)의 유사전달비(sediment delivery ratio)를 고려한 유사유출량은 각각 47.128 $ton/km^2/year$, 19.223 $ton/km^2/year$, 61.596 $ton/km^2/year$로 산정되었다. Vanoni(1975)의 유사전달비가 고려된 유사유출량은 47.128 $ton/km^2/year$로 봉동 수위관측소에서 실측된 2009년 유사유출량 42.330 $ton/km^2/year$와 비교적 유사하였다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.18 no.4
• /
• pp.325-333
• /
• 2000

This paper deals with real time building of route and vertical alignment information system for the efficient and scientific management using GSIS. First, we redesigned route and vertical alignment for obtained basic data using road projector(road design main software). Using by these acquired result, we made a database on road plan and vertical alignment drawing as a basic information being used to construction of road complex information system. The main objectives in this study are the rational maintenance road planing for drawings, its database and the systematization of route information management through the fast updating, mending, supplement. Result of this study enables us to manage route information.

• Korean Journal of Materials Research
• /
• v.25 no.10
• /
• pp.503-508
• /
• 2015

In this work, ceramic coatings were prepared on Al7075 aluminum alloy using microarc oxidation (MAO) process in a silicate-fluoride based electrolyte solution. The effect of $OH^-$ concentration, by adding NaOH to the solution on the microstructural and mechanical properties of the coating was investigated. Surface morphology and cross sectional view of the coating was analyzed using SEM while XRD was used to examine the phase compositions of the coatings. From XRD ${\alpha}-Al_2O_3$ phase was found to be increased by adding NaOH to the electrolyte. Thereby, the hardness and the wear properties of the MAO coatings were found to be superior to those of the coatings prepared without NaOH addition or with amount maximum than 2 g/l NaOH. Moreover, the morphology of the coatings was transformed form nodule-based cluster to crater based structure with the addition of NaOH to the MAO electrolyte solution.