• Journal of Korean Medicine Rehabilitation
• /
• v.20 no.2
• /
• pp.35-50
• /
• 2010

Objectives : In order to investigate the effects of So-yangin Biman-bang(here in after referred to BM) on the obese gene and obese inhibitory, C57BL/6 mice were distinctively induced by high fat diet. Methods : C57BL/6 mice were divided into four groups(normal, high fat diet with control, high fat diet with Reductil(here in after referred to RDT), high fat diet with BM extract) and have been fed for 8 weeks. Through observing the process, the weight change of the adipocytes in body and liver, total cholesterol, LDL-cholesterol, HDL-cholesterol, triglyceride, glucose, leptin change in the serum, the expression of ${\beta}3AR$ and leptin gene in 3T3-L1 cell and primary adipocyte cell. Results : The following results have been found in this study. 1. Losing weight have significantly been shown. 2. The weight change of the body adipocyte and liver have been decreased but no significance has been found. 3. With close observation on the change of blood, HDL-cholesterol has positively been increased in numbers but the level of glucose, LDL-cholesterol, triglyceride have distinctively been decreased. 4. The manifestation of ${\beta}3AR$ in 3T3-L1 cell and primary adipocyte cell have shown a definite increase in numbers but the manifestation of leptin has shown certain decrease in its amount. Conclusions : As results of this, So-yangin Biman-bang is thought to be effective in metabolic syndrom and lipid metabolism disorder that can possibly be occurred by obesity control and treatment. The clinical research will be needed in order to apply to So-yangin constitution in the future.

• Korean Journal of Plant Tissue Culture
• /
• v.28 no.2
• /
• pp.81-85
• /
• 2001

The experiment was conducted to know the effect of plant growth regulators on axillary bud elongation from in vitro stem cutting and the possibility of virus-free stock production. Axillary buds were well elongated in 3/4 strength MS medium supplemented with 0.1 or 0.5 mg/1 BA and 0.05 mg/1 NAA. Transferred plantlets could be established well in vermiculite and peat moss mixture (3:1, v/v) compare to other mixtures. In virus indexing, all the varieties of mother plants were infected by GLRV Ⅲ. Infected percentages of the three varieties were ranged from 30% to 75%. But negative response was revealed against the other species of virus, GLRV Ⅰ, GFLV and ArMV. Plantlet of 'Schuyler' and 'Muscat of Alexandria', which were cultured in vitro, showed positive response against GLRV Ⅲ and infected percentage of the former was 37.5% but the latter, 12.5%. On the other hand, that of 'Campbell Early' negativiely responded against all the species of virus indexed.

• Korean Journal of Optics and Photonics
• /
• v.10 no.2
• /
• pp.157-161
• /
• 1999

A Ti:Sapphire laser pumped by the HCP has been designed and fabricated to study the optimal pumping conditions for lasing. The fluorescence energy converter LD-490 has been used. The result showed that the threshold energy of Ti:Sapphire laser is 1.39 KJ and the best efficiency is $7.13{\times}10^{-3}$% at the concentration $1.0{times}10^{-3}$ Mol/l of LD-490 dye. However, the efficiencies were decreased with the decrease of dye concentrations. The maximum output energy was obtained at 50 Torr Ar pressure, when the input voltage was 15 kV. As a convert dye, BBQ, was added to LD-490 with the rate of 1:1, the output energy was increased, whereas the thereshold energy was decreased as 1.17 kJ.

• Journal of Welding and Joining
• /
• v.15 no.6
• /
• pp.57-65
• /
• 1997

A study was undertaken to determine the influence of welding variables such as shielding and plasma gases, torch standoff, travel speed and heat input, etc. on the quality of plasma arc welds in Zircaloy-4 sheet, 2mm thick. Effect of shielding gases and their flow rates on the mechanical properties of Zircaloy-4 welds by plasma arc welding were determined in terms of tensile, bardness and bend tests. The microstructure and fracture surface of Zircaloy-4 welds were investigated by optical and scanning electron microscopies. In addition, the causes of porosity and undercut in plasma arc welds of Zircaloy-4 were also investigated. Zircaloy-4 weld bead width and depth by helium shielding gas showed a wider and deeper than those by argon. It was found that Zircaloy-4 welds with shielding gas of helium did dxhibit a little smoother and uniform weld beads than those with shielding gas of argon. It was also found that the optimum gas flow rates for Zircaloy-4 welding were 0.45l/min for plasma gas with Ar and 4.5 - 6 l/min for shielding gas with He. In addition, there was no big difference in the microstructure and fracture surface of the weld metals made by either Ar shielding gas or He shielding gas.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.3
• /
• pp.285-290
• /
• 2003

An analytical method for the simultaneous determination of trace Ge, As and Se in biological samples by inductively coupled plasma/mass spectrometry has been investigated. The effects of added organic gas into the coolant argon gas on the analyte signal were studied to improve the detection limit, accuracy and precision. The addition of a small amount of methane (10 mL/min.) into the coolant gas channel improved the ionization of Ge, As and Se. The analytical sensitivity of the proposed Ar/CH₄system was superior by at least two-fold to that of the conventional Ar method. In the present method, the detection limits obtained for Ge, As and Se were 0.014, 0.012 and 0.064 ㎍/L, respectively. The analytical reliability of the proposed method was evaluated by analyzing the certified standard reference materials (SRM). Recoveries of 99.9% for Ge, 103% for As, 96.5% for Se were obtained for NIST SRM of freeze dried urine sample. The proposed method was also applied to the biological samples.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.3 no.1
• /
• pp.1-11
• /
• 1993

A suppression of turbulent fluid motion and a control of oxygen and dopants could be improved by application of magnetic field in Czochralski growth of silicon. The effect of an axial magnetic field on Czochralski system was numerically calculated. The fluid motions induced by temperature gradients and by crystal and crucible rotations were suppressed by magnetic force. The S/L interface was gradually flattened in proportion to the increase of magnetic field due to a reduced ascending velocity in the vicinity of center line. The t.emperature distributions in the melt at 8=0.3 Tesla were similar to those analyzed by the conduction heat transfer only. The dissipated amounts of heat flux from melt and crystal surfaces by Ar gas blowing was Jess than 3 %.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.3
• /
• pp.595-598
• /
• 2009

The authors describe an analytical method to determine total chlorine in a sanitizer liquid, incorporating a lab-made He-rf-plasma within a PDMS polymer microchip. Helium was used instead of Ar to produce a plasma to achieve efficient Cl excitation. A quartz tube 1 mm i.d. was embedded in the central channel of the polymer microchip to protect it from damage. Rotational temperature of the He-microchip plasma was in the range 1350-3600 K, as estimated from the spectrum of the OH radical. Chlorine was generated in a volatilization reaction vessel containing potassium permanganate in combination of sulfuric acid and then introduced into the polymer microchip plasma (PMP). Atomic emission lines of Cl at 438.2 nm and 837.7 nm were used for analysis; no emission was observed for Ar plasma. The achieved limit of detection was 0.81 ${\mu}g\;mL^{-1}$ (rf powers of 30-70 W), which was sensitive enough to analyze sanitizers that typically contained 100-200 ${\mu}g\;mL^{-1}$ of free chlorine in chlorinated water. This study demonstrates the usefulness of the devised PMP system in the food sciences and related industries.

• Journal of IKEEE
• /
• v.24 no.4
• /
• pp.1109-1116
• /
• 2020

The matching score evaluating human copying ability can be a good measure to check children's developmental stages, or sports movements like golf swing and dance, etc. It also can be used as HCI for AR, VR applications. This paper presents a method to evaluate the motion similarity between demonstrator who initiates movement and participant who follows the demonstrator action. We present a quantification method of the similarity which utilizes Euclidean L2 distance of Openpose keypoins vector similarity. The proposed method adapts DTW, thus can flexibly cope with the time delayed motions.

• Korean Journal of Computational Design and Engineering
• /
• v.20 no.2
• /
• pp.159-170
• /
• 2015

Radio-Frequency Identification (RFID) or Near Field Communication (NFC) technology has many advantages over other visual interfaces since it does not require line-of-sight alignment, can identify multiple tags simultaneously, and does not destroy the integrity of original objects. In addition, smart devices such as smartphone and smartpad have NFC/RFID readers which can provide mobile and natural interactions with digital and physical contents. Augmented reality has an excellent visual interaction capability with digital contents in a real environment by embedding digital contents into the physical world. In this paper, we propose a new approach to digital content interactions using RFID/NFC-based tangible interfaces in augmented reality environments that utilize invisible interfaces in addition to marker-based visual interfaces. By combining the advantages of invisible and visual interfaces, more intuitive interactions with digital contents can be provided, which can remove the difficulty of using typical AR paddles that are widely used in AR interactions. In particular, a semantic AR ontology is defined to provide more convenient interactions. Through the semantic ontology-based inferencing, physical querying and filtering are effectively supported. We will show the effectiveness and advantage of the proposed approach by demonstrating implementation results.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.6
• /
• pp.272-282
• /
• 2002

Mercurous bromide ($Hg_{2}0Br_{2}$) crystals hold promise for many acousto-optic and opto-electronic applications. This material is prepared in closed ampoules by the physical vapor transport (PVT) growth method. Due to the temperature gradient between the source and the growing crystal region, the buoyancy-driven convection may occur. The effects of thermal convection on the crystal growth rate was investigated in this study in a horizontal configuration for conditions ranging from typical laboratory conditions to conditions achievable only in a low gravity environment. The results showed that the growth rate increases linearly with Grashof number, and for 0.2 $\leq$ Ar (transport length-to-height, L/H)$\leq$1.0 sharply for Ar=5 and $\Delta$T=30 K. We have also shown that the magnitude of convection decreases with the Ar. For gravity levels of less than $10^{-2}$g the non-uniformity of interfacial distribution is negligible.