• Journal of Industrial Technology
• /
• v.28 no.A
• /
• pp.105-111
• /
• 2008

A typical AP (Access Point) selection policy is to select an AP based on the received signal strength indicator (RSSI), ignoring its load. If multiple stations are deployed densely at a particular area, a typical AP selection policy will bring about the overall network throughput degradation. This paper proposes a novel AP selection policy taking into consideration not only signal strength of the APs but also AP loads to avoid Hotspot congestion. An experiment on Alinker implementing proposed AP selection policy, demonstrates that the proposed policy achieves close to optimal load balancing and grants the maximum transmission rate to stations in comparison with SSF (Strongest-Signal-First) and LLF (Least-Loaded-First).

• Journal of Internet Computing and Services
• /
• v.10 no.2
• /
• pp.65-73
• /
• 2009

IEEE802.11 Wireless LAN(WLAN) is being widely used in public space such as airport, and increases the networking boundary in campus and enterprise, and it has lastly attracted considerable attention for mesh network and converged network with other 3G mobile communication networks. In WLAN, load balancing among Access Points(AP) is an important issue for efficient resource management or supporting the Quality of Service(QoS) of traffic, but most researches focused on the AP selection in network entry or roaming of Stations(STA). In this paper, we propose an AP-Initiated Flow Redirection(FR) for AP load balancing by monitoring AP's availability in the true sense. When the AP's resource becomes almost saturated, that is used more than a specific threshold, the AP queries the roaming possible neighbor APs about their availability and calculates the distribution of traffic load with statistical methods such as entropy or chi-square. Finally, the AP decides flows and new APs for redirection and performs it. Our simulation results show that our FR mechanism increases the performance in the various views.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.5A
• /
• pp.348-357
• /
• 2012

Recently, smartphone, notebook, PC and other supporting wireless LAN device have come into wide use. By increasing user that use wireless LAN device, wireless traffic also increased. If wireless traffic through one AP is increase, it causes throughput decrease. To solve this problem, wireless LAN service provider install more AP where overload occurred. But this is not enough. Because stations can't know AP's load factor, and APs do nothing for load balancing. In this paper, we propose Multi-Interface Access Point(MIAP) to solve this problem. MIAP operate same as multiple APs with multi-interface, and MIAP measure each interface's load periodically. If MIAP detect overloaded interface, MIAP transfer station from overloaded interface to under-loaded interface. We conducted an experiment for verifying existing problem, and we found this problem occurred. We plan an experiment scenario for a comparison between existing AP and MIAP, and excute these experiment. In the result, we show MIAP with load balancing can improve total throughput about 72% and stabilize delay jitter than existing AP.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.2 s.344
• /
• pp.1-6
• /
• 2006

This paper proposes association algorithm using load balancing for efficient AP selection under environment of wireless local area network(WLAN). Our scheme measures arrival time of association information when establishing the connection between access points and access terminal, analyzes the load condition of AP, and applies load balancing. AT selects and sets up low traffic AP by measuring traffic of connected access terminal, which can prevent over-franc of access points under hotspot environment that users access simultaneously. According to the above-described selection in a high speed wireless Internet service based on public WLAN technologies that are currently in operations. Further, it is possible to improve the efficiency of network management.

• The Journal of Korean Association of Computer Education
• /
• v.15 no.5
• /
• pp.55-62
• /
• 2012

With the development of mobile communications and Internet technology, there is a strong need to provide seamless and fast connectivity for roaming devices. Generally, the mobile host (MH) may have several available networks when entering a new wireless area. However, the standard of decision for user's internet connection is provided only the subsystem identification (SSID) and signal strength of access point (AP). These two standards could not enough to decide optimal AP to the MH. Therefore, to decide the optimal AP, more information is needed. In this paper, we present additional information such as status of MH, capacity, current load, and depth of network hierarchy, by router advertisement message at layer 3. Also, we proposed decision engine (DE) on the MH that analyzes APs and decides the optimal AP automatically by AP's status information. For the MH, wireless connection period is increased, the power consumption is decreased, and the signaling overhead is reduced. For AP and router, the load balancing is provided and the network topology can also be more efficient.

• The Journal of the Korea Contents Association
• /
• v.11 no.12
• /
• pp.578-585
• /
• 2011

Nowadays, wireless local area networks are widely deployed so that stations can potentially associate with an access point. The AP selection strategy is one of the significant research areas for wireless local area networks. The selection strategy solves the relevant problem is which AP can be selected and associated with a station so that the efficient resource utilization can be obtained. Rather than merely choosing the AP with the strongest received signal strength, however, we calculate effective throughput for each neighboring AP and use it as a basis for AP selection. Referencing the throughput is better than referencing the signal strength only because the network may contain a severe load imbalance. We have performed computer simulations using OPNET modeler in order to verify the performance of the proposed scheme. The results show us that the proposed selection method outperforms that of the conventional one in terms of throughput and delay.

• Journal of Internet Computing and Services
• /
• v.10 no.2
• /
• pp.15-28
• /
• 2009

This paper proposes HWbF(Hit and WLC based Firewall) design which consists of an PFS(Packet Filter Station) and APS(Application Proxy Station). PFS is designed to reduce bottleneck and to prevent the transmission delay of them by distributing packets with PLB(Packet Load Balancing) module, and APS is designed to manage a proxy cash server by using PCSLB(Proxy Cash Server Load Balancing) module and to detect a DoS attack with packet traffic quantity. Therefore, the proposed HWbF in this paper prevents packet transmission delay that was a drawback in an existing Firewall, diminishes bottleneck, and then increases the processing speed of the packet. Also, as HWbF reduce the 50% and 25% of the respective DoS attack error detection rate(TCP) about average value and the fixed critical value to 38% and 17%. with the proposed expression by manipulating the critical value according to the packet traffic quantity, it not only improve the detection of DoS attack traffic but also diminishes the overload of a proxy cash server.

• Annual Conference of KIPS
• /
• 2015.04a
• /
• pp.203-204
• /
• 2015

하나의 AP에 다수의 사용자가 연결되어 AP의 부하가 가중될 경우 해당 AP에 연결되어 있는 사용자들의 무선데이터 전송속도는 현저하게 떨어진다. 이를 방지하기 위해 본 논문에서는 SDN 기술을 사용하여 SDN 제어기에서 연결된 AP들의 부하분산을 지원하는 시스템을 제안하였으며, 해당 시스템은 SDN 제어기와 AP 그리고 안드로이드 스마트폰으로 구성되었다. 본 논문에서 제안하는 시스템을 지원하기 위해 각각의 AP들은 SDN 제어기와의 통신을 담당하는 SDN Agent를 설치한다. 또한 현재 이동통신단말기가 연결이 가능한 AP들의 목록을 작성하기 위해 이동통신 단말기에도 SDN Agent를 설치한다. SDN 제어기는 각각의 Agent로부터 받은 정보들을 통해 적합한 AP로 이동통신 단말기가 다시 연결될 수 있도록 한다. 본 논문에서는 제안한 시스템의 검증을 위해 실험환경을 구성하여 실험을 수행하였으며 효과적으로 동작하는 것을 확인하였다.

• Journal of information and communication convergence engineering
• /
• v.18 no.3
• /
• pp.183-187
• /
• 2020

The general Wi-Fi network connection structure is that a number of IoT (Internet of Things) sensor nodes are directly connected to one AP (Access Point) node. In this structure, the range of the network that can be established within the specified specifications such as the range of signal strength (RSSI) to which the AP node can connect and the maximum connection capacity is limited. To overcome these limitations, multiple middleware bridge technologies for dynamic scalability and load balancing were studied. However, these network expansion technologies have difficulties in terms of the rules and conditions of AP nodes installed during the initial network deployment phase In this paper, an intelligent edge computing IoT device is developed for constructing an intelligent autonomous cluster edge computing network and applying it to real-time road danger context aware and notification system through an intelligent risk situation recognition algorithm.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.4
• /
• pp.1005-1014
• /
• 2010

When reader collect tags, we found that they tend to get together to specific interface in Multi-Interface Multi-Channel 2.4GHz Active RFID system. To solve this problem, we designed the LP-Combind and AP-Balanced protocol for load distribution between interfaces, then verified its superiority of the performance through the simulation. There are three problems to implement designed protocols in hardware of firmware-level. first, tag selects randomly the channel of reader and reader need the method which can change the channel of tags. second, reader has the synchronization problem between reader and tag. third, reader has problem that MCU of reader have to operate simultaneously dual interface. To slove this problems, we designed the message and implemented method for tag channel change and the protocol in order to adjust synchronization between reader and tag, Therefore, we compared and analyzed the performance of protocols by experiment. If LP windows size is same, the performance of LP-Combined protocol and AP-Balanced protocol which lower collision probability by its load distribution is more outstanding than single interface protocol performance.