• 마이크로전자및패키징학회지
• /
• 제25권3호
• /
• pp.55-59
• /
• 2018

본 연구에서는 Si/$SiO_2$/Si-sub 구조의 SDB (silicon-direct-bonding) 웨어퍼 상에 형성된 다이아프램(diaphragm)에 제조된 전단응력형 압전저항 특성을 분석하였다. 다이아프램은 MEMS (Microelectromechanical System) 기술을 이용해 형성하였다. TMAH 수용액을 이용해 웨이퍼 후면을 식각하여 형성된 다이아프램 구조는 각종 센서제작에 활용할 수 있다. 본 연구에서는 다이아프램 상에 형성시킨 전단응력형 압전저항의 최적의 형상조건을 ANSYS 시뮬레이션을 통하여 찾고 실제 반도체 미세가공기술을 이용해 다이아프램 구조를 형성시키고 이에 붕소(boron)을 주입하여 형성시킨 전단응력형 압전저항의 특성을 시뮬레이션 결과와 비교 분석하였다. 압력감지 다이아프램은 정방형으로 제조되었다. 다이아프램의 모서리의 중심부에서 동일한 압력에 대한 최대 전단응력은 구조물이 정방형일 때 발생한다는 것을 실험으로 확인할 수 있었다. 따라서 압전저항은 다이아프램의 가장자리 중앙에 위치시켰다. 제조된 전단응력형 압전저항은 시뮬레이션 결과와 잘 일치하였고 $2200{\mu}m{\times}2200{\mu}m$ 크기의 다이아프램에 형성된 압전저항의 감도는 $183.7{\mu}V/kPa$로 나타났으며 0~100 kPa 범위의 압력에서 1.3%FS의 선형성을 가졌으며 감도의 대칭성 또한 우수하게 나타났다.

• 한국자동차공학회논문집
• /
• 제5권1호
• /
• pp.101-109
• /
• 1997

A tool for the dynamic simulation and design technique of the excavator plays an important role in the prediction of dynamic behavior of the excavator in the initial design stage. In this paper, a flexible multibody dynamic analysis model including track of the crawler type excavator is developed using DADS and ANSYS. Through the driving simulation of the excavator travelling over rough road track, frequency characteristics of the upper frame and cabin are obtained, and the reaction forces acting on the track rollers are also presented for the fatigue life estimation. The effect of boom vibration modes on the joint reaction forces and accelerations is presented from the swing simulation.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.476-479
• /
• 2002

The ageing cause in many porcelain suspension insulators which occur on transmission and distribution line with dead-end stings is mechanical stress in interface between porcelain and cement materials. It is known that the principal mechanical stress which give electrical failure is the results of the displacement is due to cement growth. We studied the effect of cement displacement resulting environmental ageing parameters on porcelain insulator mechanical properties for transmission line by simulation (ANSYS/NASTRAN program) and test methods. These simulation analysis and experimental results show that cement volume growth affects severely to be mechanical failure ageing.

• 한국기계가공학회지
• /
• 제17권2호
• /
• pp.130-136
• /
• 2018

This study develops a seat with electric motor technology for a one-ton grade commercial vehicle. While applying electric motor technology, the FMVSS 210 seat frame strength test is also conducted to examine the product's weak parts. The seat frame strength test used the FMVSS 210 test standard and the ANSYS program was used to simulate the test and identify weak parts in the deformation and strain values. The test results showed that the cushion frame and slide rail connection bracket were fractured at loads of about 10,000 N. Similarly, the maximum stress and strain values in the bracket were obtained in the simulation results. On this basis, it was evaluated that the connection part bracket was a considerably weak part in the case of the first model, and changing the shape of the bracket and reinforcing the strength were required. In addition, the seat belt anchorage test results and simulation results were compared to assure their validity. In the comparison results, the error for each is about 5-10%. Therefore, the simulation performed in this study is considered to have produced reasonably accurate results.

• 대한기계학회논문집A
• /
• 제36권7호
• /
• pp.731-738
• /
• 2012

본 논문은 상용 유한요소코드인 ANSYS Workbench 12.1과 CFX 12.1을 이용하여 NREL Phase VI Rotor에 대한 공력특성을 입구풍속 7m/s 경우에 대해 연구하였다. 공탄성 효과를 고려하기 위해 약결합 양방향 유체구조 연성기법을 사용하여 타워구조를 제외한 로터파트에 대해서 해석이 수행되었다. 블레이드 끝단의 초기 피치각은 $3^{\circ}$로 설정하였고, 구조해석모델은 등가강성기법을 적용하였다. 신뢰성 있는 수렴판정 결과의 확보를 위해 블레이드 루터부의 굽힘모멘트를 실시간으로 모니터링 하였다. 해석의 신뢰성을 검증하기 위하여 해석결과를 NREL/NASA Ames 풍동 실험결과와 비교 분석하였다.

• 대한기계학회논문집A
• /
• 제39권10호
• /
• pp.971-977
• /
• 2015

발포금속은 우수한 물리적 특성과 역학적 성능 때문에 많은 첨단기술 분야에 널리 사용되고 있다. 폐쇄형 알루미늄 폼은 발포금속 중에 하나이며, 우수한 충격에너지 흡수하는 성능 때문에 자동차와 항공기에 많이 쓰이고 있다. 본 연구에서는 폐쇄형 알루미늄 폼의 충격 실험을 통해 두께에 따른 기계적 특성을 분석하였으며, 검증으로 시뮬레이션 해석을 하였다. 시뮬레이션 해석 방법으로서는 ANSYS 를 이용하여 실험과 똑 같은 경계조건으로 유한요소해석을 진행하였다. 실험과 해석의 결과들을 비교해보면 10mm, 20mm, 30mm 인 경우에 20mm 인 경우는 제일 효율적인 것으로 사료된다. 20mm 의 경우가 시험편의 두께에 비하여 세가지 모델들의 경우에 있어 충격 에너지의 흡수가 가장 큰 것으로 나타났다. 본 연구의 결과들을 이용하면, 알루미늄 폼으로 된 기계 구조물의 개발에 필요한 자료를 제공할 수 있을 것으로 사료된다.

• Coupled systems mechanics
• /
• 제1권2호
• /
• pp.133-154
• /
• 2012

In this paper a bridge flutter prediction is performed by using advanced numerical simulation. Two novel approaches were developed simultaneously by utilizing the ANSYS v12.1 commercial software package. The first one is a fluid-structure interaction simulation involving the three-dimensional elastic motion of a bridge deck and the fluid flow around it. The second one is an updated forced oscillation technique based on the dynamic mode shapes of the bridge. An aeroelastic wind tunnel model was constructed in order to validate the numerical results. Good agreement between the numerical results and the measurements proves the applicability of the novel methods in bridge flutter assessment.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.128-133
• /
• 2003

In this paper, we have proposed a method by using virtual simulation to calculate the behaviors of spacers to avoid conductor galloping with the hanging composite polymer spacer between conductors on different phases. We have considered with three types of modeling considerations for the analysis of galloping in power transmission lines, such as iced-single conductors without spacer, iced-single conductors with spacers, and iced-two bundle conductors with spacers. In simulation, the finite element method is used to calculate the structural response with geometric nonlinear behavior. The iced conductor is modeled by two beam-element faces with which it is connected. The ANSYS program is applied too. First, the calculation results show that the two beam-element model is very suitable to make a virtual simulation. Second, the amplitude of conductor galloping is reduced after hanged spacers. Third, when number of spacer is increased, the maximum magnitude of natural frequency of iced conductor will reduce. Final, the behaviors of spacers are verified in viewpoint of standard cases.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.720-725
• /
• 1997

This paper is to study the wind effect of the large scale gantry crane. It is used to control the sway of gantry crane in the loadingiunloading job of containers. I'hls is very important in the automated container terminal because the sway of handling equipments in pard is caused by thc l~nexpected disturbance such as wind and dynamic inertia by deriving force. This study shows the process of the modelling simulation of the wind effect of the sway motion of the gantry crane. Pro-Engineer, ANSYS and DAD'; ~ rr . used for 3D solid modelling and dynamic simulation. Though this study did not use the real parameters. the ; cwl ~ shows the trend of the wind effect is very large in the large scale crane and should be considered in design of the large scale gantry crane. In future, if the study is done by using the real parameters, the result is much more ~ise!'ul for dynamic control and design of gantry crane.

• 한국기계가공학회지
• /
• 제19권4호
• /
• pp.36-44
• /
• 2020

This study analyzed the deformation behavior of the high density polyethylene (HDPE) bottle in the blow molding process. We carried out finite element (FE) simulations using ANSYS Polyflow. First, the axisymmetric model was executed by 2D FE-simulation to determine the change of bottle wall thickness during the molding process. Then, the square model of the bottle was executed by 3D FE-simulation to gauge the effects of gas pressure on the change of wall thickness. The experiment results showed that the FE-simulations were able to upgrade the quality of the HDPE bottle in the blow molding process. These results can be used as guidance in adjusting gas pressure, as well as be extended for further study to determine process parameters such as temperatures, forming velocity, parison shape, etc.