• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.1148-1152
• /
• 2017

고고도용 로켓은 지상에서의 대기압에 비하여 매우 낮은 압력조건에서 작동한다. 따라서 고고도용 로켓 실험을 지상에서 구현하기 위해서는 충분히 낮은 압력환경을 조성해 주어야 한다. 이를 위한 고고도 모사용 실험설비 중 하나인 Center Body diffuser를 작동함에 있어서 Center Body의 위치가 진공도와 시동압력에 미치는 영향을 연구하기 위하여 ANSYS FLUENT를 통하여 수치해석을 진행하였다. 본 연구의 결과는 향후 고고도 모사용 Center Body Diffuser를 운용하는데 있어서 실질적인 Data Base로써 가치가 있다고 판단된다.

• 한국산업경영시스템학회:학술대회논문집
• /
• 한국산업경영시스템학회 2002년도 춘계학술대회
• /
• pp.445-454
• /
• 2002

This article explains the theory of multiple mode/physical coordinate synthesis method in order to analyze the dynamic characteristics for an huge marine engine. The theory leads to make a simulation code. The natural frequencies obtained from the simulation code is compared to those from a commercial analysis software, ANSYS. The simulation code is well reviewed.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제52권8호
• /
• pp.342-347
• /
• 2003

The suspension insulators are subjected to harsh environment in service for a long time. Long term reliability of the insulators is required for both mechanical and electrical performances. We studied an analysing method to find out a deformation of brittle porcelain with a thermal expansion of simulation analysis and experimental results show that cement volume growths affect severely to b mechanical failure ageing.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.651-657
• /
• 2001

This article explains the theory of multiple mode/physical coordinate synthesis method in order to analyze the dynamic characteristics for an huge marine engine. The theory leads to make a simulation code. The natural frequencies obtained from the simulation code is compared to those from a commercial analysis software, ANSYS. The simulation code is well reviewed.

• International Journal of Fluid Machinery and Systems
• /
• 제3권4호
• /
• pp.342-351
• /
• 2010

During the operation of a hydro turbine the fluid mechanical pressure loading on the turbine blades provides the driving torque on the turbine shaft. This fluid loading results in a structural load on the component which in turn causes the turbine blade to deflect. Classically, these mechanical stresses and deflections are calculated by means of finite element analysis (FEA) which applies the pressure distribution on the blade surface calculated by computational fluid dynamics (CFD) as a major boundary condition. Such an approach can be seen as a one-way coupled simulation of the fluid structure interaction (FSI) problem. In this analysis the reverse influence of the deformation on the fluid is generally neglected. Especially in axial machines the blade deformation can result in a significant impact on the turbine performance. The present paper analyzes this influence by means of fully two-way coupled FSI simulations of a propeller turbine utilizing two different approaches. The configuration has been simulated by coupling the two commercial solvers ANSYS CFX for the fluid mechanical simulation with ANSYS Classic for the structure mechanical simulation. A detailed comparison of the results for various blade stiffness by means of changing Young's Modulus are presented. The influence of the blade deformation on the runner discharge and performance will be discussed and shows for the configuration investigated no significant influence under normal structural conditions. This study also highlights that a two-way coupled fluid structure interaction simulation of a real engineering configuration is still a challenging task for today's commercially available simulation tools.

• 한국생산제조학회지
• /
• 제22권4호
• /
• pp.730-734
• /
• 2013

The dynamic simulation of machine tools and motion control systems has been widely used for optimization, design verification, control design, etc. There are three main streams in dynamic simulation: structural dynamic analysis based onthe finite element method, dynamic motion analysis based on equations of motion, and control system analysis based on transfer functions. Generally, one of these dynamic simulation methods is chosen and employed for specific purposes. In this study, an integrated dynamic simulation is introduced, in which the structure, motion, and control dynamics are combined together. Commercially well-known software is used in the integrated dynamic simulation: ANSYS, ADAMS, and Matlab/Simulink. Using the integrated dynamic simulation, the dynamics of a magnetic bearing stage is analyzed and the causes of oscillation and noise are identified. A controller design for suppressing a flexible dynamic mode is carried out and verified through the integrated dynamic simulation.

• 한국정보전자통신기술학회논문지
• /
• 제15권3호
• /
• pp.198-204
• /
• 2022

본 논문에서는 ANSYS 유동해석 시뮬레이션 프로그램을 이용하여 5kW와 50kW 수직축 풍력터빈에 대해 연구였다. 5kW급 수직축 풍력터빈은 주 블레이드의 갯수와 보조 블레이드의 개수를 각각 30개로 하였고 주속비(TSR)를 0.2에서 06까지 변화를 주면서 전기적 특성을 분석하였다. 5kW급 수직축 풍력터빈의 전기적 특성을 기초로 하여 50kW급 수직축 풍력터빈을 설계 하였다. 5kW급 풍력발전은 주속비가 0.5일 때 9.5kW의 출력과 0.28의 효율이 최대로 나타났다. 출력전류(I_p)와 출력전압(E_p)을 계산한 결과, 주속비가 증가하면 출력전류(I_p)는 감소되고 출력전압(E_p)은 증가되는 것을 알 수가 있었다. 그리고 주속비를 변화주어도 5kW급 풍력발전은 5kW 이상 출력이 측정되었다. 주속비를 0.3부터 0.6까지 변화시켰을 때, 50kW급 풍력발전은 50kW 이상 출력되었다. 50kW급 풍력발전은 주속비가 0.4일 때, 출력은 58.37[kW]이고 효율은 0.318로 최대로 나타났으며, 제안한 50kW 풍력발전이 설계조건을 만족함을 확인하였다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권2호
• /
• pp.269-281
• /
• 2014

This paper examines the suitability of using the Computational Fluid Dynamics (CFD) tools, ANSYS-CFX, as an initial analysis tool for predicting the drag and propulsion performance (thrust and torque) of a concept underwater vehicle design. In order to select an appropriate thruster that will achieve the required speed of the Underwater Disk Robot (UDR), the ANSYS-CFX tools were used to predict the drag force of the UDR. Vertical Planar Motion Mechanism (VPMM) test simulations (i.e. pure heaving and pure pitching motion) by CFD motion analysis were carried out with the CFD software. The CFD results reveal the distribution of hydrodynamic values (velocity, pressure, etc.) of the UDR for these motion studies. Finally, CFD bollard pull test simulations were performed and compared with the experimental bollard pull test results conducted in a model basin. The experimental results confirm the suitability of using the ANSYS-CFX tools for predicting the behavior of concept vehicles early on in their design process.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.543-547
• /
• 2001

CAE has been settled down to an indispensable tool for the simulation of a mechanical system according to the development of computer-aided analysis rapidly. Particularly finite element programs have advanced to the one of most valuable things in the filed of CAE due to the remarkable progress in the implementation. But since this analysis tool mostly provides the result of the analysis, it cannot satisfy designers who are seeking for information to improve their designs. Therefore, design sensitivity analysis or optimization module has been incorporated into commercial FEA programs to satisfy the desire of designers since 1990s. Design sensitivity analysis is to compute the rate of change of response with respected to design variable. Design sensitivity analysis is classfied into static design sensitivity analysis, Eigenvalue design sensitivity analysis and dynamic design sensitivity analysis. In this research, it will be presented to nonlinear static design sensitivity analysis formulation and nonlinear static design sensitivity analysis external module based ANSYS have been developed and illustrated an example to verify the developed module.

• 한국수자원학회논문집
• /
• 제47권1호
• /
• pp.11-24
• /
• 2014

본 연구에서는 3차원 수치모형(ANSYS CFX model)을 이용하여 수조 내 다공성 구조물을 통과하는 댐 붕괴파의 전파특성에 대한 수치적 분석을 수행하였다. 다공성 구조물 내 및 주위에서의 수심분포에 대한 기존의 측정된 결과와 모의된 결과를 비교한 결과 비교적 잘 일치하는 것으로 나타났다. 또한 수조 내에 다공성 구조물이 부분적으로 존재하고 있을 경우에 대한 3차원 흐름구조를 수치적으로 분석하였다. 전반적으로 다공성 구조물이 존재하는 영역에 비해 존재하지 않은 영역에서 수심의 급격한 변동이 보다 크게 나타났으며, 따라서 다공성 구조물은 수심의 급격한 변동을 감소시키는 역할을 하는 것으로 나타났다.