• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.5
• /
• pp.121-128
• /
• 2012

The optimization of cooling system parameters for designing injection mold is very important to acquire the highest part quality. In this paper, the integration of computer simulations of injection molding and Analysis of Variance(ANOVA) with orthogonal array was used as a design tool to optimize the cooling system parameters aimed at minimizing the part warpage. The design optimizer was applied to find the optimum levels of cooling system parameters for a dustpan. This optimization resulted in more uniform temperature distribution over the part and significant reduction of a part warpage, showing the capability of present method as an effective design tool. The whole optimization process was performed systematically in a proper number of cooling simulations. The design optimizer can be utilized effectively in the industry practice for designing mold cooling system with less cost and time.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.6
• /
• pp.16-21
• /
• 2011

In machining operation, the quality of surface finish is an important factor for many turned products. In this paper, surface quality in turning machining considering angle variation has been investigated. To reach this goal, surface quality turning experiments are carried out according to cutting conditions with angle variation. The variable cutting conditions are cutting speed, feed rate and taper angle of workpiece. The surface roughness was measured and the effects of cutting conditions were analyzed by the method of analysis of variance (ANOVA). From the experimental results and ANOVA, it is found that a better surface roughness can be obtained as decreasing feed rate, increasing cutting speed. Taper angle variation has been more influenced by feed rate and cutting speed.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.341-344
• /
• 2004

In the present research, slump, modulus of rupture (MOR) and flexural toughness $(I_{30})$ of high performance hybrid fiber reinforced concrete (HPHFRC) mixed with micro-fiber (carbon fiber) and macro-fiber (steel fiber) and replaced with silica fume were assessed with the analysis of variance (ANOVA). Steel fiber was a considerable significant factor in aspect of the response values of MOR and boo Based on the significance of factors related to response values from ANOVA, following assessments were available; Slump decrease: carbon fiber >> steel fiber > silica fume; MOR: steel fiber > silica fume > carbon fiber; $I_{30}$: steel fiber > carbon fiber > silica fume. Steel fiber $1.0\%$, carbon fiber $0.25\%$ and silica fume $5.0\%$, and Steel fiber $1.0\%$, carbon fiber $0.25\%$ and silica fume $2.5\%$ were obtained as the most optimum mixture.

• Advances in concrete construction
• /
• v.6 no.6
• /
• pp.611-629
• /
• 2018

The objective of present study is to investigate the effect of granulated blast furnace slag (GBS) as partial substitution of natural sand on behaviour of cement mortar. For this, the methods of factorial design with water cement (w/c) ratio and incorporation percentages of GBS as replacement of natural fine aggregate i.e., GBS(%) as factors are followed. The levels of factor w/c ratio are fixed at 0.4, 0.45, and 0.5 and the levels of factor GBS(%) are kept fixed as 0%, 20%, 40%, 60%, 80% and 100%. The compressive strength (CS) of mortar after 3, 7, 14, 28, 56 and 90 days, and water absorption (WA) are chosen as responses of the study. Analysis of variance (ANOVA) of experimental results has been carried out and those are illustrated by ANOVA tables, main effect and interaction plots. The results of study depict that the selected factors have substantial influence on the strength and WA of mortar. However, the interaction of factors has no substantial impact on CS and WA of mixes.

• International Journal of Highway Engineering
• /
• v.15 no.6
• /
• pp.61-68
• /
• 2013

PURPOSES : The purpose of this study is to study the noise reducing effect of Micro Surfacing by comparing general asphalt, longitudinal tining and Slurry Seal. METHODS : This study measures vehicles' noise of each section by the NCPX method that can measure noise between the road surface and the tire at the field. Total sound pressure and sound pressure level by the 1/3 octave band frequency are calculated through the field data of each section. Total sound pressure level is compared by ANOVA test statistically. After ANOVA test, post-hoc test is conducted to know mean difference of surface type by Tukey. RESULTS : As the result of CPB analysis to confirm sound pressure levels by frequency, it was shown that sound pressure levels by frequency are totally similar except for those of frequency bands between 100Hz and 500Hz. The result of ANOVA test and post-hoc test, it was shown that sections of surface type have a difference. The result of Micro Surfacing was lower 2~5dB(A) than other surface type. CONCLUSIONS : It is found that the noise reduction performance of Micro Surfacing was better than other surface type.

• Environmental and Resource Economics Review
• /
• v.30 no.1
• /
• pp.79-105
• /
• 2021

In the circumstance of standing out the climate change issue, the purpose of this study is to compare the efficiency of offshore and coastal fisheries according to whether or not greenhouse gas (GHG) emissions are considered, and then to present policy alternatives based on the analysis results. For analysis, the traditional data envelopment analysis (DEA), the slacks-based measure (SBM) and the SBM-undesirable models were used, and robust analysis of variance (ANOVA) and Wilcoxon Signed-rank tests were performed. As a result, the study showed that the average efficiency of fisheries decreased as the traditional DEA extended to the SBM model considering the slack and the SBM-undesirable model including the GHG emissions. Specifically, the average efficiency of the traditional DEA model, SBM model, and SBM-undesirable model was analyzed as 0.7350, 0.5820 and 0.4976 respectively. In addition, the results of the robust ANOVA and Wilcoxon Signed-rank tests all showed that there are statistically significant differences in efficiency between offshore and coastal fisheries as well as among traditional DEA, SBM and SBM-undesirable models. As a policy alternative to the analysis, it was suggested that to improve the efficiency of coastal and offshore fisheries, it is necessary to actively implement the new fishing vessel project and develop smart and electric hybrid fishing vessels.

• The Journal of Fisheries Business Administration
• /
• v.40 no.3
• /
• pp.127-146
• /
• 2009

This study is to estimate the factor weights of the reasons for decreases in marine fishery resources using the Analytical Hierarchy Process. Furthermore, it classifies 20 fishes under a fishery resource recovery plan into various groups of fishes according to these factor weights using the non-hierarchial cluster analysis. The factors of decreases in marine fishery resources are identified as bio-ecological, technology-system, economic-business, and fishing village-society factors. Two of the most important factors of decreases in resource are turned out to be the economic-business and bio-ecological factors, estimated as 31% and 30% respectively. The technology-system and fishing village-society factors are estimated as 21% and 18% respectively. The study utilizes non-hierarchical cluster analysis in order to classify 20 fishes into 2, 3, and 4 groups. K-means cluster analysis is applied for grouping in conjunction with ANOVA to identify statistical differences in factors. Once again, the economic-business and bio-economic factors play main role in grouping 2-groups of fishes case. The third group of fishes in addition to the previous 2 groups of fishes appears as those 4 factors of decrease evenly play about the same role at a 3-groups of fishes case. Finally, the economic-business and bio-economic factors are turned out to be evenly important in the 4th group once there are 4-groups of fishes.

• Laser Solutions
• /
• v.7 no.3
• /
• pp.11-24
• /
• 2004

In automotive industry, light weight vehicle is one of issues because of the air pollution and the protection of environment. Therefore, automotive manufacturers have tried to apply light materials such as aluminum to car body. Aluminum welding using laser has some advantages high energy density and high productivity. It is very important to understand behavior of plasma and keyhole in order to improve weld quality and monitor the weld state. In this study, spectral analysis was carried out to verify the spectrum for plasma which is generated in laser welding of A 6000 aluminum alloy. Two photodiodes which cover the range of plasma wavelength was used to measure light emission during laser welding according to assist gas flow rate and welding speed. Analysis of relationship between sensor signals of welding variables and formation of keyhole and plasma is performed. To determine the level of significance, analysis of variation (ANOVA) was carried out.

• Culinary science and hospitality research
• /
• v.8 no.2
• /
• pp.153-171
• /
• 2002

This study had three major purpose: 1) to examine the relationship between coloring factor of Hors d'oeuvre and preference of dishes. 2) to examine the relationship between coloring factor of Hors d'oeuvre and selection of dishes. 3) to examine the relationship between coloring factor of Hors d'oeuvre and customer satisfaction. Questionnaires for the study were distributed 300 subjects in deluxe class hotels in Seoul. Among 300 questionnaires, 280 subjects were collected and utilized for analysis. In HY hotel, 35 subjects of customers, 24 subjects of cooks, and 32 subjects of service personnels were collected. In R hotel, 29 subjects of customers, 32 subjects of cooks, and 32 subjects of service personnels were collected. In H hotel, 29 subjects of customers, 34 subjects of cooks, and 33 subjects of service personnels were collected. Analysis ways used for this study were frequency analysis, factor analysis, reliability analysis, ANOVA, To accomplished the objective 1), ANOVA was utilized. To accomplished the objective 2) and 3), regression analysis was unitized. The findings from this study were as follows. First it was found that selection of dishes was affected by coloring factory of Hors d'oeuvre. Secondly, it was found that customer satisfaction was affected by coloring factor of Hors d'oeuvre. Consequently, development of Hors d'oeuvre by harmonizing of various colorings should be activated to raise level of preference of dishes. Also, in regard to level of satisfaction, harmony of various colorings should be required.

• Child Health Nursing Research
• /
• v.15 no.3
• /
• pp.261-270
• /
• 2009

Purpose: The purpose of this study was to compare the result of one-way ANOVA with that of cross-correlation time series analysis in order to evaluate physiologic responses of premature infants to human voices. Methods: Four premature infants born prior to 32 weeks gestational age were included in the study. The Gould 4000TA Recording System recorded the preterm infant's heart and respiratory rate while they were listening to a pre-recorded voice recording. Each infant listened to both male and female voices (1 min each) at each testing session. Results: The results of both one-wayANOVA and cross-correlation time series analysis using heart and respiratory rate data were not consistent in some of premature infants. A cross-correlation time series analysis revealed that the responses of premature infant to vocal stimulation occurred at a varying number of seconds after the stimulus was presented and lasted for over 20-30 sec. Conclusion: The results indicate that a time series analysis can provide more detailed information on the rapidly changing physiologic status of premature infant to the auditory stimulus. In addition, the results provide an insight into an auditory responsitivity of premature infants to a naturally occurring sound, the human voice, in the neonatal intensive care unit.