• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.11 no.5
• /
• pp.123-130
• /
• 2001

The purpose of this paper is to reduce the level of idling vibration on a steering wheel. In some cases, vibration on steering wheel is amplified due to the resonance between the first natural frequency of T-beam and engine idling speed. Using SDM(structural dynamic modification) technique, T-beam is redesigned to reduce its vibration. This paper used FRF(frequency response function) synthesis technique which is entirely dependent on experiment. But this method requires lots of test efforts to enhance its reliability of design. While combining this method with an analytic method. the experimental burden, the major drawback of FRP synthesis method, can be considerably relieved. Using ana1ytic sensitivity analysis, some effective modification regions are preliminarily chosen as candidate Positions where SDM can be applied to modify T-beam\`s dynamic characteristics.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.2
• /
• pp.185-192
• /
• 1998

The methodology of applying fabric stretch ratio in the grants pattern drafting was evaluated. The experimental fabrics employed in this study were 3 different knit fabrics with various stretch ratio in vertical or horizontal direction. The firm fitting pants pattern was modified by applying the fabric stretch ratio in vertical ana horizontal direction. The computer automatic drafting method was used for pants pattenl alteration. The suitability of the altered pattern was evaluated by the 7 clothing specialists, The results showed that fit of all experimental garments was improved in general. The garment which was constructed with the fabric having large difference between horizontal stretch ratio and vertical stretch ratio showed poor fit at crotch area. This result implies that computer aided pattern alteration is not appropriate when fabric stretch ratio is vary by the fabric directions.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.52 no.2
• /
• pp.123-128
• /
• 2007

Demand for high quality rice has always been a major factor in the international rice marketing. In the present study, doubled haploid (DH) population derived from anther culture of a Tongil/japonica hybrid was used for genetic analysis of rice grain quality. The average values of DH lines for grain weight, grain length and the ratio of grain length to width were near the mid-parent value. More than 40% DH lines showed transgressive segregation for grain weight, length, amylose and lipid content, but less than 10% DH lines observed on ratio of length to width and grain thickness were transgressive segregation. Correlation analysis between appearance qualities and physicochemical characters indicated that grain width and grain thickness both significantly and negatively correlated to protein and lipid content. A highly significant negative correlation between protein content and amylose content was observed.

• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 1986.12a
• /
• pp.532.2-532
• /
• 1986

Alkaline protease which is an important enzyme used in detergents, leather tanning and food industry was produced by alkalophilic bacterium, Bacillus sp. KCTC 1723 isolated from soil. The maximum productivity of the enzyme in alkaline medium containing 1% sodium bicarbonate was obtained by incubating for 3 days at 37$^{\circ}C$. The optimum pH of the enzyme was 11.5 and calcium ion was effective on stabilization of the enzyme at high temperature. The enzyme was not inhibited by metal chelating agent such as El)TA but inhibited by diisopropyl fluorophosphate. Purification of the enzyme was carried out DEAE- and CM-cellulose column chromatographies and molecular weight of the purified enzyme was determined

• Journal of Conservation Science
• /
• v.36 no.1
• /
• pp.28-36
• /
• 2020

The storage environment of a Japanese woodblock print collection was assessed for organic acids. The active air sampling method was used to collect organic acid emissions in the low microgram range from areas of a selected woodblock print with different pigments, following which an off-gassing mitigation strategy based on the fan filter unit(FFU) system was investigated. Research findings revealed that the off-gassing behavior of woodblock prints is significantly impacted by storage practices and to a lesser degree by the pigments. The FFU system can be used as a mitigation strategy, but the permanence of the results depends on the storage conditions.

• The Journal of Korean Society for Radiation Therapy
• /
• v.2 no.1
• /
• pp.23-29
• /
• 1987

The general features and measured results of the 143cm, variable-energy, three sector-focused MC-50 cyclotron installed at Korea Cancer Center Hospital are described. The MC-50 cyclotron is designed to produce beams of protons, deuterons, He-3 and alpha particles of maximum energies 50MeV, 25MeV, 66MeV and 50MeV respectively to be used for neutron therapy and radioisotope production. The azimuthal field variation is produced by three sets of spiral ridges having a maximum spiral angle of $55^{\circ}$. The RF system, a two-dee quarter-wave system is designed to provide a continuously variable frequency from 15.5 to 26.8 MHz. The first external beam was obtained in January 1986. Subsequent internal ana external beam studies with protons and alphas show a well-behaved beam through the whole beam transport system.

• Food Science and Biotechnology
• /
• v.18 no.4
• /
• pp.1027-1029
• /
• 2009

The aim of this research was to study the structural and rheological properties of gels formed by ferulated maize bran arabinoxylans (MBAX) at different concentrations. MBAX was cross-linked by a laccase leading to the formation of dimers and trimers of ferulic acid (di-FA, tri-FA) as covalent cross-link. An increase in MBAX gels elasticity (from 11 to 20 Pa) as well as lower mesh size (from 80 to 48 nm) were obtained by augmenting the MBAX concentration from 2.5 to 3.5%(w/v), respectively, but no increase in di-FA and tri-FA content was obtained (0.03 and 0.014 ${\mu}$g/mg MBAX, respectively).

• Computers and Concrete
• /
• v.16 no.1
• /
• pp.163-178
• /
• 2015

Due to the increase of the use of precast concrete structures in multistory buildings, this paper deals with the behavior of an specific type of beam-column connection used in this structural system. The connection is composed by concrete corbels, dowels and continuity bars passing through the column. The study was developed based on the experimental and numerical results. In the experimental analysis a full scale specimen was tested and for numerical study, a 3D computational model was created using a finite element analyze (FEA) software, called DIANA. The comparison of the results showed a satisfactory correlation between loading versus displacement curves.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.16 no.4
• /
• pp.410-412
• /
• 1983

On maturation of abalone KIKUCHI'S concept of accumulative temperature expressed ${\Sigma}(t_i-{\theta})$ have been apply importantly for an anniversary spawning of the animals. In case of Haliotis discus hannai he was formulated ${\Sigma}(t_i-7.6)>1300$. This expression is able to modify by UKI'S the relationship between the daily feeding rate ($\%$) (Y) ana temperature ($^{\circ}C$) (t) expressed Y= 0.4291 t-0.1501. The modified expression is as the formula ${\Sigma}(Y-3.05)>570$. And the concept its meaning involves is replaced with accumulative ingestion instead of accumulative temperature. This modified concept is understood that on maturation of abalone temperature decide on satiation level, food ingestion decide on gonad maturity rate.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2002.11b
• /
• pp.417-420
• /
• 2002

XML은 표준화와 운영체제 중립적이라는 특성 때문에 전자상거래에서 중요한 위치를 차지하며, 이미 많은 전자상거래 시스템에서 이용하고 있다. B2B 전자상거래분야를 위해서는 기업간 비즈니스에 대한 업무 규칙과 절차가 표준화되어야 한다. 그러나 기업들이 표준화 된 XML 문서를 사용하는 것이 아니라 기업의 실정에 맞게 시스템을 구축하여 기업간 XML 문서 전달을 하고 있어, 이에 따라 많은 문제점이 나타나고 있다. 이러한 요구를 기반으로 많은 조직과 기업에서는 XML을 기반으로 하는 전자상거래 표준화 작업을 프레임 워크 형태로 진행하고 있다. 본 논문에서는 TCP/IP 기반의 메시징 시스템을 설계 및 구현하였으며, 시스템을 모듈별로 설계를 하였기 때문에 시스템의 확장성이 용이하다. 본 메시징 시스템을 전자상거래 시스템에 적용하여 효율적으로 이용할 수 있을 것이다.