• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.18 no.6A
• /
• pp.51-61
• /
• 2008

This paper suggests a new way to implement high speed AES on Intel Core2 processors and AMD Athlon64 processors, which are used all over the world today. First, Core2 Processors of EM64T architecture's memory-access-instruction processing efficiency are lower than calculus-instruction processing efficiency. So, previous AES implementation techniques, which had a high rate of memory-access-instruction, could cause memory-bottleneck. To improve this problem we present the partial round key techniques that reduce the rate of memory-access-instruction. The result in Intel Core2Duo 3.0 Ghz Processors show 185 cycles/block and 2.0 Gbps's throughputs in ECB mode. This is 35 cycles/block faster than bernstein software, which is known for being the fastest way. On the other side, in AMD64 processors of AMD64 architecture, by removing bottlenecks that occur in decoding processing we could improve the speed, with the result that the Athlon64 processor reached 170 cycles/block. The result that we present is the same performance of Matsui's unpublished software.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.29 no.4
• /
• pp.366-376
• /
• 2013

The purpose of this study is to evaluate the marginal and internal fit of coping made by CAD/CAM using different scanning methods. Zirconia coping was made by each CAD/CAM system followed by intra-oral scanning, model optical scanning and model contact scanning. It was embedded into Epoxy Resin and was cut by buccal to lingual. AMD (Absolute marginal discrepancy), MG (Marginal gap), GA (Gap of axial), GL (Gap of line angle) and GO (Gap of occlusal) of each sample were measured. The result is as followed; 1. The mean value of AMD in Group 1, Group 2, Group 3 are $141.21{\pm}42.94{\mu}m$, $140.63{\pm}31.64{\mu}m$, $109.37{\pm}28.42{\mu}m$. The averages of MG in Group 1, Group 2, Group 3 are $82.52{\pm}43.99{\mu}m$, $90.28{\pm}27.93{\mu}m$, $66.55{\pm}28.77{\mu}m$. Statistically there is no difference in AMD and MG among the three Groups (Anova, P>0.05). 2. GA of Group 2 revealed statistically difference compared with Group 1 and Group 3 (Anova, P<0.05). 3. GL and GO of Group 1 showed statistically significant differences compared with Group 2 and Group 3 (Mann-whitney test (P<0.05). Zirconia copings made by 3 ways of scanning methods have no difference with conventional ceramics in AMD and MG which are known as the most important factors.

• Journal of Korean Society of Water Science and Technology
• /
• v.26 no.6
• /
• pp.13-26
• /
• 2018

This research was conducted to elucidate the removal mechanism of heavy metals and sulfate ion from acid mine drainage(AMD) by porous zeolite-slag ceramics (ZS ceramics) packed in a column reactor system. The average removal efficiencies of heavy metals and sulfate ion from AMD by the 1:3(Z:S) porous ZS ceramics in the column reactor under the HRT condition of 24 hours were Al 97.5%, As 98.8%, Cd 86.1%, Cu 96.2%, Fe 99.7%, Mn 64.1%, Pb 97.2%, Zn 66.7%, and $SO_4{^{2-}}$ 76.0% during 121 days of operation time. The XRD analysis showed that the ferric iron from AMD could be removed by adsorption and/or ion-exchange on the porous ZS ceramics. In addition it was known that Al, As, Cu, Mn, and Zn could adsorb or coprecipitate on the surface of Fe precipitates such as schwertmannite, ferrihydrite, or goethite. The EDS analysis revealed that Al, Fe, and Mn, which were of relatively high concentration in the AMD, would be adsorbed and/or ion-exchanged on the porous ZS ceramics and also exhibited that Al, Cu, Fe, Mn, and Zn could be precipitated as the form of metal hydroxide or sulfate and adsorbed or coprecipitated on the surface of Fe precipitates. The microscopic results on the porous ZS ceramics and precipitated sludge in a column reactor system suggested that the heavy metals and sulfate ion from AMD would be eliminated by the multiple mechanisms of coprecipitation, adsorption, ion-exchange as well as precipitation.

• Journal of Soil and Groundwater Environment
• /
• v.14 no.1
• /
• pp.29-35
• /
• 2009

In this study, the effect of pH and temperature on the adsorption behavior of acid mine drainage (AMD) on coal mine drainage sludge (CMDS) has been investigated during the treatment of coal mine drainage (CMD) by electrical purification method. The pH$_{zero\;point\;charge}$ (pH$_{zpc}$) of CMDS was 5. The removal ratio of copper, zinc, cadmium, iron were increased according to the increase of pH value. The adsorption amount of copper showed 0.64 mg g$^{-1}$ sludge. It was independent of pH value. The adsorption amount of the other metals showed l.l times when pH was 3. The adsorption amount of chromium was a little bit increased at the pH value higher than 7 due to a small amount of the chromium was eluted as $Cr(OH)_6^{3-}$. The amount of metals' absorption were decreased according to temperature was increase at pH value was 3. The selectivity order was Cd>Fe > Zn > Cu. The amount of absorption showed q$_{max}$ Cu 2.747 mg g$^{-1}$ andZn 2.525 mg g$^{-1}$ when pH value higher than 5. It was independent of temperature.

• Korean Journal of Ecology and Environment
• /
• v.45 no.1
• /
• pp.72-81
• /
• 2012

We investigated the effects of acid mine drainage (AMD) from abandoned coal mines on benthic macroinvertebrate communities in the upper reaches of the Nakdong River from May to October in 2009. Qualitative and quantitative sampling (Surber sampler: $50{\times}50$ cm; mesh size, 0.2 mm) was conducted at 7 study sites and 3 control sites in the study area. We thus sampled 117 species belonging to 53 families, 15 orders, 6 classes, and 5 phyla; the Ephemeroptera, Plecoptera, and Trichoptera group (EPT-group) represented the majority of the benthic macroinvertebrate community (71 species; 64.5%). In the quantitative sampling, a total of 11,575 individuals belonging to 58 species of benthic maroinvertebrates were sampled from the study sites (Sites 1-7), whereas 2,844 individuals belonging to 79 species were sampled from the control sites (Sites A-C). Tolerant species such as oligochaetes, $Epeorus$ $pellucidus$, $Baetis$ $fuscatus$, Hydropsychidae species, and Chironomidae species were predominant in the study sites. The community indices for the study sites, such as MacNaughton's dominance index (DI) (mean${\pm}$SD, $0.52{\pm}0.21$; range, 0.33-0.85) and the Shannon diversity index ($H^{\prime}$) ($2.06{\pm}0.60$; 1.06-2.57), were different from those for the control sites (DI: $0.29{\pm}0.07$, 0.22-0.35; $H^{\prime}$: $3.13{\pm}0.14$; 3.03-3.30). In the study sites, shredders and scrapers were scarce, whereas gathering-collectors (mainly Chironomidae species) were relatively abundant, as were clingers and burrowers. The detrended correspondence analysis (DCA) and similarity analyses showed that benthic macroinvertebrate communities in the study sites were clearly separated from those of the control sites, with the greatest dissimilarity being noted at the uppermost study site (Site 1), which is located close to an abandoned coal mine. The Korean saprobic index (KSI) and the ecological score using benthic macroinvertebrates (ESB) showed that the uppermost study site (Site 1) was ${\alpha}$-mesosaprobic or heavily polluted, whereas other study sites were in a fair or relatively good condition.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.33 no.5
• /
• pp.775-785
• /
• 2023

As processor technology advances, it has accelerated ISA extensions and increased the complexity of micro-architectures, leading to a continued rise in the importance of processor validation techniques. Recently, various fuzzing techniques have been introduced to discover undocumented instructions, and this study highlights the shortcomings of existing undocumented instruction fuzzing techniques and presents our observation on error cases in the latest processors from Intel and AMD. In particular, we analyzes the causes of false positives resulting from the fuzzer incorrectly judging CPU instruction length and proposes the length determination technique based on instruction execution information to improve accuracy.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.597-601
• /
• 2008

Three-dimensional structures of detonation wave propagating in circular tube were investigated. Inviscid fluid dynamics equations coupled with a conservation equation of reaction progress variable were analyzed by a MUSCL-type TVD scheme and four stage Runge-Kutta time integration. Variable-$\gamma$ formulation was used to account for the variable properties between unburned and burned states and the chemical reaction was modeled by using a simplified one-step irreversible kinetics model. The computational code was parallelized based on domain decomposition technique using MPI-II message passing library. The computations were carried out using a home made Windows based PC cluster having 160 AMD AthloxXP and Athlon64 processor. The computational domain consisted of through a roundshaped tube with wall conditions. As an initial condition, analytical ZND solution was distributed over the computational domain with disturbances. The disturbances has circumferential large gradient. The unsteady computational results in three-dimension show the detailed mechanisms of multi-cell mode of detonation wave instabilities resulting diamond shape in smoked-foil record.

• Archives of Pharmacal Research
• /
• v.20 no.1
• /
• pp.1-6
• /
• 1997

We determined the microviscosity of synaptosomal plasma membrane vesicles (SPMV) isolated from bovine cerebral cortex and liposomes of total lipids (SPMTL) and phospholipids (SPMPL) extracted from SPMV. Changes in the microviscosity induced by the range and rate of lateral diffusion were measured by the intramolecular excimerization of 1, 3-di(1-pyrenyl)propane (Py-3-Py). The microviscosity values of the direct probe environment in SPMV, SPMTL and SPMPL were 38.17, 31.11 and 27.64 cP, respectively, at$37^{\circ}C$and the activation energies $(E_a)$ of the excimer formation of Py-3-Py in SPMV, SPMTL and SPMPL were 8.236, 7.448 amd 7.025 kcal/mol, respectively. Probe location was measured by polarity and polarizability parameters of the probe Py-3-Py and probe analogues, pyrene, 1-pyrenenonanol and 1-pyrenemethyl-3${\beta}$-hydroxy-22, 23-bisnor-5-cholenate (PMC), incorporated into membranes or solubilized in reference solvents. There existed a good linear relationship between the first absorption peak of the $^1_a$ band and the polarizability parameter $(n^{2}-1)/(2n^{2}+1)$.The calculated refractive index values for SPMV, SPMTL and SPMPL were close to 1.50, which is higher than that of liquid paraffin (n=l.475). The probe location was also determined by using a polarity parameter $(f-1/2f^{I})$. Here f=$({\varepsilon}-1)/(2{\varepsilon}+1)$ is the dielectric constant function and $f^I=(n^2-1)/(2n^2+1)$ is the refractive index function. A correlation existed between the monomer fluorescence intensity ratio and the solvent polarity parameter. The probes incorporated in SPMV, SPMTL, and SPMPL report a polarity value close to that of 1-hexanol $({\varepsilon}=13.29)$. In conclusion, Py-3-Py is located completely inside the membrane, not in the very hydrophobic core, but displaced toward the polar head groups of phospholipid molecules, e.g., central methylene region of aliphatic chains of phospholipid molecules.

• The Journal of the Petrological Society of Korea
• /
• v.4 no.2
• /
• pp.104-123
• /
• 1995

Mantle xenoliths in alkali basalt from Boun, Gansung area, and Baegryung island in S. Korea are spinel lherzolites composed of olivine, orthopyroxene, clinopyroxene, and spinel. The xenoliths generally show triple junctions among grams, kink-banding in olivine and pyroxenes, and protogranular and eqigranular textures having m orlentatron of specific direction. Anhedral brown spinels are disseminated in the intergranular spaces of minerals. Mineral compositions are very homogeneous without compositional zonation from rim to core in grains regardless different locahties. Olivine shows Fo. component of 89.0-90.2 and low CaO of 0.03-0.12wt%, orthopyroxene is enstatite with En component of 89.0 - 90.0 and $Al_2O_3$ of 4-5wt%, and clinopyroxene is diopside having En. component of 47.2-49.1 and $Al_2O_3$ of 7.42-7.64wt% from Boun and 4.70-4.91wt% from Baegryung showing local variation. Spinel shows the distinctive negative trend with increasing of A1 and decreasing of Cr, and Mg value and Cr number are 75.1-81.9 and 8.5-12.6, respectively. To estlmate T and P for these mantle xenoliths pyroxene-geothermometers (Wood and Banno, 1973; Wells, 1977; Mercier, 1980; Sachtleben and Seck, 1981; Bertrand and Mercier, 1985; Brey and Kohler, 1990) and Al-solubility geobarometer (Mercier, 1980; Lane and Ganguly, 1980) are used. Temperatures of Mercier (1980) and Sachtleben and Seck (1981) are compatible and equilibrium temperatures of xenoliths, average value of these two, aiie from $970^{\circ}C$ to $1020^{\circ}C$, and equihbrium pressures derived from Mercier (1980) are in the range of 12-19 Kb (42-63 Km). These temperatures and pressures seem to be reasonble wlth the consideration of Al-isopleths in MAS system (Lane and Ganguly, 1980) and Fe effect on Al-solubility in orthopyroxene (Lee and Ganguly, 1988). Equllibrium of temperatures and pressures of xenoliths in P-T space belong to ocenanic geothem among the Mercier's mantle geotherms (1980) and are completely different from continental geotherms of S. Africa (Lesotho) and S. India having different geologcal ages. anera1 compositions of spmel-lherzohtes in S. Korea and eastern China are primitwe and paleogeothems of both are very s~mllar, but degrees of depletion of upper mantle could be locally different from each other since eastern China has various depleted xenoliths due to different degrees of partial melting.