Objectives: Recently, angiogenesis has gained an increasing interest as a prognostic factor in breast cancer. In this study we aimed to assess the anti angiogenic effects of HAD, a botanical anticancer remedy which has been prescribed in Daejeon University Oriental Hospital in Korea, on patients with breast carcinoma by measuring the serum vascular endothelial growth factor (VEGF), basic fibroblast growth factor (b-FGF) and platelets levels. Methods: The study included 26 consecutive breast cancer patients (mean age$\pm$standard deviation: 47.5$\pm$8.7 years) with stage II to IV disease who were treated with HAD (mean duration $\pm$ standard deviation: 264.5$\pm$121.6 days). In addition to routine laboratory and staging procedures, serum VEGF, b-FGF levels and platelet counts were determined as antiangiogenic markers. The antiangiogenic effects of HAD were evaluated by analyzing the differences between the values of the antiangiogenic markers before and after the treatment with HAD. Results: Serum b-FGF concentrations were significantly reduced after the treatment with HAD (P=0.042). Serum VEGF concentrations were found to have a somewhat decreasing change, though the change was not statistically significant (P=0.229). Platelet counts had little changes (P=O.80). Conclusions: It is supposed that HAD has effects on decreasing the serum b-FGF levels related with the clinical outcome of breast cancer patients.
This paper describes the fabrication of AlN thin films containing iron and iron nitride particles, and the magnetic and electrical properties of such films. Fe-N-Al alloy films were deposited in Ar and $N_2$ mixtures at ambient temperature using Fe/Al composite targets in a two-facing-target DC sputtering system. X-ray diffraction results showed that the Fe-N-Al films were amorphous, and after annealing for 5 h both AlN and bcc-Fe/bct-$FeN_x$ phases appeared. Structure changes in the $FeN_x$ phases were explained in terms of occupied nitrogen atoms. Electron diffraction and transmission electron microscopy observations revealed that iron and iron nitride particles were randomly dispersed in annealed AlN films. The grain size of magnetic particles ranged from 5 to 20 nm in diameter depending on annealing conditions. The saturation magnetization as a function of the annealing time for the $Fe_{55}N_{20}Al_{25}$ films when annealed at 573, 773 and 873 K. At these temperatures, the amount of iron/iron nitride particles increased with increasing annealing time. An increase in the saturation magnetization is explained qualitatively in terms of the amount of such magnetic particles in the film. The resistivity increased monotonously with decreasing Fe content, being consistent with randomly dispersed iron/iron nitride particles in the AlN film. The coercive force was evaluated to be larger than $6.4{\times}10^3Am^{-1}$ (80 Oe). This large value is ascribed to a residual stress restrained in the ferromagnetic particles, which is considered to be related to the present preparation process.
Journal of the Korean Society for Aeronautical & Space Sciences
/
v.40
no.11
/
pp.940-947
/
2012
The target system is a middle size UAV, which is a low-speed long-endurance UAV with a weight of 18 kg and wingspan of 6.4 m. Three electric power sources, i.e. solar cells, a fuel cell, and a battery, are considered. The optimal takeoff time is determined to maximize the endurance because the generated solar cell's energy is heavily dependent on it. Each power source is modeled in Matlab/Simulink, and the component models are verified with the component test data. The component models are integrated into a power system which is used for power simulations. When takeoff time is at 6 pm and 2 am, it can supply the power during 37.5 hrs and 27.6 hrs, respectively. In addition, the thermostat control simulation for fuel cell demonstrates that it yields more power supply and efficient power distribution.
Heavy metal level and distribution in sediment and bivalves from the tidal flats along the mid-western coast, Korea. were investigated in this study. The averages of heavy metal concentrations in sediments from 5 sampling sites ranged from 86.35-187.77mg/kg for Mn. 13.25-17.73mg/kg for Zn.6.80-11.85mg/kg for Cr,4.28-6.25mg/kg for Ni, 1.85-3.09mg/kg for Cu, 0.004-0.02()mg/kg for Cd and 5.70-10.41 mg/kg for Pb, respectively. From the results of heavy metal concentrations in mussels, the levels of Mn and Fe concentrations in S. strictus collected from S1 antral S2 sites were particularly high. Deviations of heavy metal concentrations am(Ing the individual mussels from the same site could be largely minimized by selecting mussel samples of the limited range in body size(8.5-11cm). Among the mussels of the limited body size, heavy metal concentrations both in the flesh and in the whole soft part were not strongly related to the body size. It was shown that ,in S. strictus, Cu moves fast into the flesh parts after absorption, while Pb and Fe move fast into the non-flesh parts. Overally. the heavy metal concentration in the tends to increase with that in the whole soft parts. The concentration factors(heavy metal concentration in 5. strictus/heavy metal concentration in sediment) showed that, of the examined meta1s. Cd is the most cumulative in the body of S. strictus followed by Zn and Cu, while Mn, Cr. Ni and Pb are not cumulative.
Development of temporary housing for victims whose house damaged is required. In this study is to plan temporary house space 'Mobile Energy Shelter House ; MeSH' that can be inhabited for a long time. And measure the indoor Environmental performance. 'Mobile Energy Shelter House : MeSH' was made by reflecting Passive Design, Universal Design. Also, thermal insulation that meets the 'Korea standard insulation' for use low energy. Winter season, measuring temperature, humidity, air velocity and radiation temperature when floor heating that temperature controllers ware installed is used. Confirmed the data for the 8:00pm to 8:00am because evening hours are expected as residents live. Average outdoor temperature was $-11.3^{\circ}C$ and Indoor temperature was from $16.09^{\circ}C$ to $20.63^{\circ}C$. Calculated the TDRi of the window surface for checked condensation risk. TDRi value was 0.185. Furthermore, PMV value was -0.08 to -0.85. It was satisfied to ISO comfort criterion ranged.
Proceedings of the Korean Institute of Information and Commucation Sciences Conference
/
2011.05a
/
pp.77-80
/
2011
Medical robot has four fields. Surgery assistant robot, robotic surgery, Surgery Simulator, rehabilitation robot. Thus, medical robots is often high precision and reliability requirements for operations are being developed. Medical service robot's another sector is care for service robots. Care services robot is the hospital's reception work and biometric data acquisition of patients, the hospital in location and content information provide to patients. But now medical service robot practical acceptance process failed to progress. In this paper were the medical service robot systems design and implementation. Implemented the robot system is using the standard protocols for the exchange of medical information and can be linked with hospital information system. The hospital's patient reception and processing, to provide care waiting number information.
Kim, Seok-Gon;Hwang, Jun-Won;Lee, Ying;Choi, Yong-Sung;Lee, Kyung-Sup
Proceedings of the KIEE Conference
/
2009.04a
/
pp.43-45
/
2009
In case of favourable irradiation conditions, the ratio of irradiation to the total irradiation went up and then the irradiation increased in the area with high angle of inclination. The study showed that on a clear day with the irradiation of more than 80$[W/m^2]$, the pattern of alternating current power change in the fixed system was similar with that in the single-axis tracker. On the contrary, in case of unfavourable irradiation conditions, the ratio of diffuse irradiation to the total irradiation went up and then the horizontal irradiation increased. In the demo system, the fixed system, the single-axis tracker and the dual-axis tracker all had low generation power and similar generation pattern with each other. The study showed the generation power varied with the irradiation in the fixed system, while in the single-axis tracker and the dual-axis tracker, the amount of the generation Power variation was much more than the irradiation variation. The demo system was operated from 11:00 AM to 2:00 PM for generating power, during which time, 46[%] to 56[%] of the total generation power was produced. In this study, the generation power was increased by 147[%] in the fixed system, by 136[%] in the single-axis tracker, and by 164[%] in the dual-axis tracker, and the pattern of generation power was similar with the generation power variation in the situation where the irradiation increased by 140[%] in the spring with plenty of insolation. The alternating current power was more sensitive to variation of the irradiation than to that of the surface temperature of a module. The variation of the irradiation had a more positive effect on the generation power than the type of array.
Proceedings of the Korean Vacuum Society Conference
/
1999.07a
/
pp.94-94
/
1999
반도체 Hall 효과를 이용하여 자계를 검출하여 이를 전압신호로 출력하는 자기센서로는 주로 GaAs, InSb, InAs 등의 박막이 사용되고 있다. 자기센서의 응용분야가 최근에는 직류전류의 무접촉 검출, 자동차의 무접촉 회전 검출, 산업용 기계의 제어용 무접촉 위치검출 분야로 확대되고 있어 그 수요가 급증하고 있다. 이중 Hall 소자의 응용분야중 많은 활용이 기대되고 있는 자동차용 무접촉 센서는 -4$0^{\circ}C$~15$0^{\circ}C$의 온도범위에서 안정하게 작동하여야 하므로 온도 안정성이 매우 중요하다. 그러나 Hall 소자 시장의 80%를 점유하고 있는 InSb Hall 소자는 온도가 올라감에 따라 저항이 급격히 낮아지는 성질을 가지고 있으므로 10$0^{\circ}C$ 이상의 온도에서 사용하는 것이 불가능하다. 한편 InAs(에너지갭~0.18eV)는 InSb보다 에너지 갭이 크므로 고온에서도 작동이 가능하고 자계변화에 따른 출력의 직진성이 매우 좋다는 장점을 가지고 있다. 이러한 InAs Hall 소자를 실현하기 위해서 가장 중요한 것이 고품위의 InAs의 박막 성장기술이다. InAs 박막을 성장하기 위해서 사용되고 있는 기판은 GaAs이다. 그러나 GaAs 기판과 InAs 박막 사이에는 약 7% 정도의 격자부정합이 존재하기 때문에 높은 이동도를 가지는 고품위 박막을 성장시키기가 매우 어렵다. 이에 본 연구에서는 분자선에피택시 방법을 이용하여 GaAs 기판위에 고품위의 InAs 박막을 성장하는 기술을 연구하였으며, 성장된 InAs 박막의 특성을 DCX 및 Hall effect 등으로 조사하였다. InAs 박막 성장시 기판은 <0-1-1> 방향으로 2$^{\circ}$ off 된 GaAs(100)를 사용하였다. InAs 박막성장시 기판온도는 48$0^{\circ}C$로 하고 GaAs buffer 두께는 2000$\AA$로 하여 As flux 및 Si doping 농도등을 변화시켰다. 그 결과 Si doping 농도 2.21$\times$1017/am에서 10,952cm2/V.s의 이동도를 얻었다.
Kim, Young-Am;Lee, Yong-Hee;Lee, Dong-Sun;Suh, Myung-Gyo
Journal of Environmental Health Sciences
/
v.32
no.5
s.92
/
pp.499-505
/
2006
Bioventing efficiency was compared in a continuous and an intermittent(6hr injection and 6hr rest) air injection mode. Two lab-scale columns which packed with 5 kg of soil artificially contaminated by diesel oil were operated. The columns were maintained at the $25^{\circ}C{\pm}2.5$ in order to minimize the effect of exterior temperature variation. The flow rate of air injection mode were maintained constantly at the flow rate of 10 ml/min. The moisture of the columns was stably maintained at $60{\sim}80%$ of field capacity. The nutrient compounds were added to make C:N:P ratio as 100:10:l. The continuous and intermittent injection modes showed 67.56% and 69.63% reduction of initial TPH concentration during 90 days, respectively. Two venting modes showed similar results in the analysis of the trends of the hydrocarbon utilizing bacterial counts for operating periods. The carbon dioxide production rate of the continuous injection mode was higher than that of intermittent injection mode. The loss of diesel oil by volatilization in the continuous and intermittent injection modes were about 5% and 1%, respectively. The lower volatilization loss in the intermittent injection mode suggested that the biodegradation of TPH in the intermittent injection mode was greater than that of the continuous mode. These results suggested that the intermittent injection mode is more efficient than the continuous venting mode.
The common squid Todarodes pacificus is an ecologically and commercially important species in Korea and Japan. However, the distribution pattern of its eggs and larvae in Korean waters has not yet been clarified. To determine the horizontal and temporal distribution of common squid larvae in the northern East China Sea, samples collected using paired, 60 cm diameter Bongo nets from the three surveys conducted in August 2003, May 2004 and November 2005 were examined. In addition, the vertical distribution was examined from the samples collected using a $1\;m^2$ MOCNESS in April 1999 (20 m interval down to 100 m). A total of 218 larvae ranging in mantle length (ML) from 1.2 to 17.0 mm were counted at 27 stations. Larval abundance was highest in May 2004. The larvae mainly occurred in the southeastern area of Jeju Island, where the water temperature and salinity at 50 m deep ranged from $15-23^{\circ}C$ and 34-34.6 psu, respectively. Most larvae were collected in the frontal zone, where the Tsushima Warm Current and inshore waters meet. The results from the MOCNESS samples showed that the larvae occurred mostly in 20-80 m depth ranges (about 90%), although collections were only conducted above 100 m. No significant differences in larval mantle lengths (ANOVA, P>0.05) were found among each depth interval. Given the occurrence sites of the larvae <2.0 mm ML, the spawning ground of this species appears to be within the northern East China Sea, mainly to the southeast and northeast of Jeju Island, in early spring.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.