• Title/Summary/Keyword: AM-to-PM

Search Result 455, Processing Time 0.026 seconds

Epidemiological properties of salmonellosis of poultry farms in Kyongbuk province at recent year (최근 경북지역의 양계농장에서 발생한 salmonellosis의 역학적 특성)

  • 오강희;박노찬;김영환;조민희;이준규;신상희;손재권;정종식
    • Korean Journal of Veterinary Service
    • /
    • v.23 no.1
    • /
    • pp.45-59
    • /
    • 2000
  • The present study was conducted to investigate the epidemiological properties of salmonellosis of poultry farms in Kyongbuk province during the relied from November 1998 to November 1999 And antibiotic susceptibility and biochemical characteristics of 120 Salmonella cultures isolated from chicken samples were also investigated. The results obtained through this study were summarized as follows, 1. Among 667,200 chickens of 31 flocks in 17 layer farms and 9 broiler farms, 61,350 chickens of 31 flocks were died with salmonellosis. The death rate of 25 farms varied from 0.1% to 75.0%, and the average death rate was 9.2%. 2. According to etiological agents, fowl typhoid was shown the most predominant outbreak among the salmonellosis during a year, which accounted for 8R.0%(22/25) of the total case 3. The serotypes of 120 Salmonella isolates were identified as 7 strains(5.8%) of S pullorum, 10 strains(8.4%) of S typhimurium and 103 strains(85.8%) of S gallinarum. 4. Most outbreak of fowl typhoid were prevalent on the layer chicken farms(77.1%), and the summer season(45.5%) also appeared the most hazardous season during the year. 5. It seemed that the Hyline breed(70.6%) was the most susceptible among the layer chicken breeds, and followed by Isabrown(23.5%), Tetra(5.9%) in order. 6. In layers, 76.4% of fowl typhoid occurred commonly from 14 to 40 weeks including the early laying peroid, but in broiler farms, all cases was outbreak within first second weeks. 7 All the strains of S pullorum were resistant to lincomycin(Lm), penicillin(Pm), and steptomycin(Sm), but sensitive to amikacin(Ak), ampicillin(Am), cephalothin(Ce), ciprofloxacin (CiP), chloramphenicol(Cm), colistin(Co), enrofloxacin(Enr), furazolidone(Fu), gentamicin(Gm), kanamycin(Km), neomycin(Nm), polymyxin(Po), and teracycline(Tc). All the strains of S typhimurium were resistant to Lm(100%), Pm(100%), Po(90%), and Sm(90%), but were sensitive to Ak, Am, Ce, CiP, Cm, Co, Enr, Fu, Gm, Km, Nm, and Tc. 8. Minimum inhibitory concentration(MIC) of 103 strains of S gallinarum were also evaluated and their patterns were much more variable than others. All the strains of S gallinarum were sensitive to Ak, Am, Ce, Cip, Cm, Enr, Fu, Km, and Nm, but resistant to Lm(100%), and Sm(100%), 99(96.1%) to Co, 83(80.6%) to Pm, and 83(80.6%) to Po, 55(53.4%) to Gm, and 33(32.0%) to Tc. 9. The multiple drug resistance patterns of 120 Salmonella strains were CoLmPmPo Sm pattern(34.2%), CoGmLmPmPoSmTc(20.8%), CoGmLmPmPoSm(13.3%), CoGmLmSm(7.5%), LmPmSm(7.5%), LmPm(6.7%), CoLmSmTc(3.3%),, CoGmLmSmTc(1.7%), GmLmSmTc(1.7%), CoGmLmPoSm(0.1%), LmPmPo(0.1%), CoLm Sm(0.1%), and LmSm(0.1%), in order.

  • PDF

Performance Analysis of Pilot Symbol Assisted QAM (PSA-QAM) with Power Amplifiers Nonlinear Compensation Technique (전력증폭기 비선형 보상 기술을 고려한 PSA-QAM의 성능분석)

  • 이병로;임영회;임동민;이광석;김현덕
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.2 no.2
    • /
    • pp.249-258
    • /
    • 1998
  • In land mobile communication, very extensive studies on pilot symbol assisted modulation (PSAM) have been made on fading compensation. This paper analyzes the effect of power amplifier nonlinearity on PSA-QAM with maximal ratio combining space diversity. In practical PSAM, information on fading is obtained through interpolation of the pilot symbols. We employed the interpolation filter which could minimize the average power of error and analyzed effects on the system performance of the number of filter taps, period of the pilot symbol frame, and the Doppler frequency. Nonlinear power amplifiers of class AB, B, and C were incorporated in the system models and their AM/AM and AM/PM characteristics were taken into account in the performance analysis. We showed the performance variations according to the types of the nonlinear power amplifiers in the AWGN and Rayleigh fading channels using nonlinear compensation technique, Cartesian Feedback Loop (CFB).

  • PDF

An Assessment of Air Quality Using Statistical Analysis in Gwangju Area (통계분석을 이용한 광주지역 대기오염도)

  • Seo Gwang Yeob;Paik Ke Jin;Shin Dae Yewn
    • Journal of Environmental Health Sciences
    • /
    • v.30 no.5 s.81
    • /
    • pp.417-426
    • /
    • 2004
  • We investigate changing characteristics and concentration distribution of ambient air quality using data from which obtained local ambient air monitoring network and local meterological measuring sites in Gwangju area from January to December in 2003. Sulfur dioxide ($SO_2$) showed that increase from 8 AM and decrease in 6 PM but, it was not drastically changed concentration. it also 0.010 ppm in 1995 from at this time it's decrease step by step and than some constant in year 2001 to 2003. Nitrogen dioxide ($NO_2$) concentration was showed highest peak in 10 AM and increase again at 6 PM. And also it showed peak concentration (0.026 ppm) in 2001 and decreased from after that times. Ozone was showed peak concentration in 1 PM and Nitrogen dioxide was ditto in 10 AM from this data, we can conclude that this two article ws showed chemical reaction by 3 to 5 hours. There was no case of Ozone alarm in Gwangju area since 1995, but it showed highest ozone concentration (over 0.070 ppm) in May and June of the year and 2 to 4 PM of the day and sometimes it showed increase at the dawn. Ozone product optimum condition was that air temperature is over $25^{\circ}C$, no rain and increase solar radiation (over $20MJ/m^2$) and no wind or below 2.0 m/s wind speed.

Evaluation of marginal discrepancy of pressable ceramic veneer fabricated using CAD/CAM system: Additive and subtractive manufacturing

  • Kang, Seen-Young;Lee, Ha-Na;Kim, Ji-Hwan;Kim, Woong-Chul
    • The Journal of Advanced Prosthodontics
    • /
    • v.10 no.5
    • /
    • pp.347-353
    • /
    • 2018
  • PURPOSE. The purpose of this study was to evaluate the marginal discrepancy of heat-pressed ceramic veneers manufactured using a CAD/CAM system. MATERIALS AND METHODS. The ceramic veneers for the abutment of a maxillary left central incisor were designed using a CAD/CAM software program. Ten veneers using a microstereolithography apparatus (AM group), ten veneers using a five-axis milling machine (SM group), and ten veneers using a traditional free-hand wax technique (TW group) were prepared according to the respective manufacturing method. The ceramic veneers were also fabricated using a heat-press technique, and a silicone replica was used to measure their marginal discrepancy. The marginal discrepancies were measured using a digital microscope (${\times}160$ magnification). The data were analyzed using a nonparametric Kruskal-Wallis H test. Finally, post-hoc comparisons were conducted using Bonferroni-corrected Mann-Whitney U tests (${\alpha}=.05$). RESULTS. The $mean{\pm}SD$ of the total marginal discrepancy was $99.68{\pm}28.01{\mu}m$ for the AM group, $76.60{\pm}28.76{\mu}m$ for the SM group, and $83.08{\pm}39.74{\mu}m$ for the TW group. There were significant differences in the total marginal discrepancies of the ceramic veneers (P<.05). CONCLUSION. The SM group showed a better fit than the AM and TW groups. However, all values were within the clinical tolerance. Therefore, CAD/CAM manufacturing methods can replace the traditional free-hand wax technique.

Monitoring Method for an Ambient Gamma Exposure Rate and Its Measurement Analysis

  • Lee, Mo-Sung;Woo, Jong-Kwan
    • Journal of Radiation Protection and Research
    • /
    • v.31 no.4
    • /
    • pp.197-201
    • /
    • 2006
  • Daily and seasonal variations of the ambient gamma ray exposure rates were measured by using a pressurized ion chamber from January 2003 to December 2005 in the CheongJu Regional Radiation Monitoring Post and the patterns of the distributions were studied. The annual average of the daily variation of the exposure rate was $\sim0.17{\mu}R/h$. The exposure rate was found to be maximum during 8:00 am to 9:00 am and minimum during 8:00 pm to 10:00 pm. For the annual data, the exposure rate was the minimum during the month of February. The exposure rate increased from February to mid-October (except during the period from May to July with no change) and decreased from October to February. The seasonal variation was found to be about $1{\mu}R/h$. Most of the measured values (96%) of the exposure rates fell under the normal distribution with a deviation of less than 4.8% and the remaining 4% had large fluctuations caused mainly by the rainfalls.

Changes in Marketability of Strawberry 'Maehyang' for Export as Affected by Harvest Time of the Day and Temperature of Precooling and Storage (수출 딸기 '매향'의 일중 수확시기와 예냉 및 저장 온도에 따른 상품성 변화)

  • Park, Ji Eun;Kim, Hye Min;Hwang, Seung Jae
    • Journal of Bio-Environment Control
    • /
    • v.29 no.2
    • /
    • pp.153-160
    • /
    • 2020
  • This study was conducted out to investigate the effect of harvest time of the day, precooling or not, and temperature of precooling and storage on the marketability in strawberries 'Maehyang' for export in May. Strawberry colored with 60±5% of the skin was harvested at 07:00 am or 15:00 pm, respectively. After harvesting, some strawberries were precooled to 0, 2, 4℃ for 3 hours in the cold store, respectively, and the others were kept at room temperature. And then, strawberries were stored at low temperature in the cold store set at 4, 8 or 10℃ storage temperatures. The weight loss rate, firmness, soluble solids content, color, incidence of gray mold of strawberries were measured at two days intervals during storage for 14 days. Both 07:00 am and 15:00 pm harvest, fruits as the storage periods lapses increased weight loss rate compared to the weight at harvest time of the day, and the difference in the weight loss rate of fruits depending on the treatment was greater at 15:00 pm harvest than at 07:00 am. Firmness tended to increase again after 8th day at 07:00 am or 15:00 pm harvest, respectively. In the afternoon harvest, 10℃ storage without precooling showed the lowest fruit firmness on the 2nd day after storage. The soluble solids content at 07:00 am or 15:00 pm harvest tended to be maintained at high value with precooled and stored at low temperature as storage days elapse. The color values were significantly higher at 'L' indicating brightness and lower at 'a', indicating redness at low storage temperature regardless of harvesting time of the day and whether it was precooling or not. The incidence of gray mold was higher at 15:00 pm harvest than at 07:00 am harvest, and it was significantly higher in the treatments stored at 10℃ after precooling similarly. In this study, strawberry 'Maehyang' for export harvested at 07:00 am and stored at 4℃ after precooling at 0℃ maintained the best shelf life, therefore, it is judged that desirable to harvest in the morning with low temperature and to precool and store at low temperature.

Laser Phase Noise to Electronic Phase Noise Conversion in Optical Links Comprising Optical Resonators

  • Wang, Ziye;Yang, Chun;Xu, Weijie
    • Current Optics and Photonics
    • /
    • v.2 no.5
    • /
    • pp.395-399
    • /
    • 2018
  • This article investigates the mechanism of electronic signal phase noise degradation induced by laser phase noise in optical links comprising optical resonators. Through theoretical derivation, we find that the phase noise of the output electronic signal has the same spectral shape of optical intensity noise as the output of the optical resonator. We propose that the optical resonator transfers laser phase noise to light intensity fluctuation and then the intensity fluctuation is converted to electric phase noise through AM-PM conversion mechanism in the photodiode. An optical link comprising a Fabry-Perot resonator was constructed to verify the proposed mechanism. The experimental results agree with our theoretical prediction verifying that the supposition is correct.

Diurnal Variation, Vertical Distribution and Source Apportionment of Carcinogenic Polycyclic Aromatic Hydrocarbons (PAHs) in Chiang-Mai, Thailand

  • Pongpiachan, Siwatt
    • Asian Pacific Journal of Cancer Prevention
    • /
    • v.14 no.3
    • /
    • pp.1851-1863
    • /
    • 2013
  • Diurnal variation of particulate polycyclic aromatic hydrocarbons (PAHs) was investigated by collecting PM10 at three different sampling altitudes using high buildings in the city center of Chiang-Mai, Thailand, during the relatively cold period in late February 2008. At site-1 (12 m above ground level), B[a]P concentrations ranged from 30.3-1,673 pg $m^{-3}$ with an average of $506{\pm}477\;pg\;m^{-3}$ contributing on average, $8.09{\pm}8.69%$ to ${\Sigma}PAHs$. Ind and B[b]F concentrations varied from 54.6 to 4,579 pg $m^{-3}$ and from 80.7 to 2,292 pg $m^{-3}$ with the highest average of $1,187{\pm}1,058\;pg\;m^{-3}$ and $963{\pm}656\;pg\;m^{-3}$, contributing on average, $19.0{\pm}19.3%$ and $15.4{\pm}12.0%$ to ${\Sigma}PAHs$, respectively. Morning maxima were predominantly detected in all observatory sites, which can be described by typical diurnal variations of traffic flow in Chiang-Mai City, showing a morning peak between 6 AM. and 9 AM. Despite the fact that most monitoring sites might be subjected to specific-site impacts, it could be seen that PAH profiles in Site-1 and Site-2 were astonishingly homogeneous. The lack of differences suggests that the source signatures of several PAHs become less distinct possibly due to the impacts of traffic and cooking emissions from ground level.

Different Coefficients and Exponents for Metabolic Body Weight in a Model to Estimate Individual Feed Intake for Growing-finishing Pigs

  • Lee, S.A.;Kong, C.;Adeola, O.;Kim, B.G.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.29 no.12
    • /
    • pp.1756-1760
    • /
    • 2016
  • Estimation of feed intake (FI) for individual animals within a pen is needed in situations where more than one animal share a feeder during feeding trials. A partitioning method (PM) was previously published as a model to estimate the individual FI (IFI). Briefly, the IFI of a pig within the pen was calculated by partitioning IFI into IFI for maintenance ($IFI_m$) and IFI for growth. In the PM, $IFI_m$ is determined based on the metabolic body weight (BW), which is calculated using the coefficient of 106 and exponent of 0.75. Two simulation studies were conducted to test the hypothesis that the use of different coefficients and exponents for metabolic BW to calculate $IFI_m$ improves the accuracy of the estimates of IFI for pigs, and that PM is applied to pigs fed in group-housing systems. The accuracy of prediction represented by difference between actual and estimated IFI was compared using PM, ratio (RM), or averaging method (AM). In simulation studies 1 and 2, the PM estimated IFI better than the AM and RM during most of the periods (p<0.05). The use of 0.60 as the exponent and the coefficient of 197 to calculate metabolic BW did not improve the accuracy of the IFI estimates in both simulation studies 1 and 2. The results imply that the use of $197kcal{\times}kg\;BW^{0.60}$ as metabolizable energy for maintenance in PM does not improve the accuracy of IFI estimations compared with the use of $106kcal{\times}kg\;BW^{0.75}$ and that the PM estimates the IFI of pigs with greater accuracy compared with the averaging or ratio methods in group-housing systems.

Molecular Orbital Studies of Bonding Characters of Al-N, Al-C, and N-C Bonds in Organometallic Precursors to AIN Thin Films

  • 이기학;박성수;이한명;박수진;박항수;이윤섭;김윤수;김세훈;조찬균;은희만
    • Bulletin of the Korean Chemical Society
    • /
    • v.19 no.12
    • /
    • pp.1314-1319
    • /
    • 1998
  • Electronic structures and properties of the organometallic precursors [Me2AlNHR]2 (R =Me, iPr, and tBu) have been calculated by the semiempirical (ASED-MO, MNDO, AM1 and PM3) methods. Optimized structures obtained from the MNDO, AM1, and PM3 calculations indicate that the N-C bond lengths are considerably affected by the change of the R groups bonded to nitrogen, but the bond lengths of the Al-N and Al-C bonds are little affected. This result is useful in explaining the experimental results for the elimination of the R groups bonded to nitrogen, and could serve as a guide in designing an optimum precursor for the AlN thin film formation.