• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.8
• /
• pp.1612-1620
• /
• 2003

This papers describes a nonlinear transfer function modelling of designed GaAs FET power amplifier by measured and simulated values of designed PA amplifier for multi­carrier transmission system, With the results of PA nonlinearity characteristic, we can estimates AM­AM and AM­PM of designed PA. According to the estimated nonlinear characteristics, we can analysis the ACPR of PA for spectral regrowth, the error vector measurement(EVM) of constallation signals and bit error rate of QPSK and 64­QAM. The suggested nonlinear modelling results are used to get an accurate estimate of digital characteristics between PA amplifier and wireless multi­carrier transmission system using OFDM.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.5
• /
• pp.711-718
• /
• 1999

Some of modern communication systems make use of broadband digital modulation with 5 MHz and 10 MHz. In the broadband communication systems, the nonlinear properties of power amplifier have a great effect on all systems. This paper analyzed the ACPR characteristics of WLL reverse link power amplifier with the varying AM and PM nonlinearities and suggests the required backoff from 1 dB compression point to satisfy the ACPR specifications. Also the comparions between the measured and the simulated characteristics are presrnted.

• The Korean Journal of Physiology and Pharmacology
• /
• v.9 no.5
• /
• pp.291-298
• /
• 2005

To characterize cytosolic $Ca^{2+}$ fluctuations under metabolic inhibition, rat ventricular myocytes were exposed to $200{\mu}M$ 2,4-dinitrophenol (DNP), and mitochondrial $Ca^{2+}$, mitochondrial membrane potential (${\Delta}{\Psi}m$), and cytosolic $Ca^{2+}$ were measured, using Rhod-2 AM, TMRE, and Fluo-4 AM fluorescent dyes, respectively, by Laser Scanning Confocal Microscopy (LSCM). Furthermore, the role of sarcolemmal $Na^+$/$Ca^{2+}$ exchange (NCX) in cytosolic $Ca^{2+}$ efflux was studied in KB-R7943 and $Na^+$-free normal Tyrode's solution (143 mM LiCl ). When DNP was applied to cells loaded with Fluo-4 AM, Fluo-4 AM fluorescence intensity initially increased by $70{\pm}10$% within $70{\pm}10$ s, and later by $400{\pm}200$% at $850{\pm}45$ s. Fluorescence intensity of both Rhod-2 AM and TMRE were initially decreased by DNP, coincident with the initial increase of Fluo-4 AM fluorescence intensity. When sarcoplasmic reticulum (SR) $Ca^{2+}$ was depleted by $1{\mu}M thapsigargin plus $10{\mu}M ryanodine, the initial increase of Fluo-4 AM fluorescence intensity was unaffected, however, the subsequent progressive increase was abolished. KB-R7943 delayed both the first and the second phases of cytosolic $Ca^{2+}$ overload, while $Na^+$-free solution accelerated the second. The above results suggest that: 1) the initial rise in cytosolic $Ca^{2+}$ under DNP results from mitochondrial depolarization; 2) the secondary increase is caused by progressive $Ca^{2+}$ release from SR; 3) NCX plays an important role in transient cytosolic $Ca^{2+}$ shifts under metabolic inhibition with DNP.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.8
• /
• pp.911-918
• /
• 2010

With limitation of frequency bandwidth, the range accuracy of typical radars is limited. In this paper, for short distance measurements, the use of an AM(Amplitude Modulated) radar which provides improved range accuracy is proposed. The AM radar signal consists of a carrier frequency signal and double-sideband components. The fabricated AM radar operates with +10 dBm output power and 35 dB receiver gain at 24.128 GHz center frequency with 20 MHz bandwidth, and the range accuracy is measured as ${\pm}15\;cm$.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.16 no.4
• /
• pp.397-410
• /
• 2018

When considering the long-term safety assessment of spent-nuclear fuel management, americium is one of the most radio-toxic actinides. Although spectroscopic methods are widely used for the study of actinide chemistry, application of those methods to americium chemistry has been limited. Herein, we purified $^{241}Am$ to obtain a highly pure stock solution required for spectroscopic studies. Quantitative and qualitative analyses of purified $^{241}Am$ were carried out using liquid scintillation counting, and gamma and alpha radiation spectrometry. Highly sensitive absorption spectrometry coupled with a liquid waveguide capillary cell and time-resolved laser fluorescence spectroscopy were employed for the study of Am(III) hydrolysis and oxalate (Ox) complexation. $Am^{3+}$ ions under acidic conditions exhibit maximum absorbance at 503 nm, with a molar absorption coefficient of $424{\pm}8cm^{-1}{\cdot}M^{-1}$. $Am(OH)_3(s)$ colloidal particles formed under near neutral pH conditions were identified by monitoring the absorbance at around 506-507 nm. The formation of ${Am(Ox)_3}^{3-}$ was detected by red-shifts of the absorption and luminescence spectra of 4 and 5 nm, respectively. In addition, considerable enhancements of the luminescence intensities were observed. The luminescence lifetime of ${Am(Ox)_3}^{3-}$ increased from 23 to 56 ns, which indicates that approximately six water molecules are replaced by carboxylate ligands in the inner-sphere of the Am(III). These results suggest that ${Am(Ox)_3}^{3-}$ is formed through the bidentate coordination of the oxalate ligands.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.10
• /
• pp.1096-1103
• /
• 2008

This paper proposes an individual order predistortion linearizer using intermodulation distortion(IMD) generator for cancellation the third and the fifth IMD of power amplifier. The IMD generator for controlling the third and the fifth IMD consist of common Emitter amplifier and Schottky diode. These signals are generated by series feedback of Schottky diode to obtain the inverse AM/AM and AM/PM characteristics of power amplifier. The individual order predistorters are consisted of individual IMD generator, power splitter and combiner. The test results show that the third and the fifth IMD can be improved by a maximum 13.5 dB and 0.9 dB in case of CW 2-tone signals. Also, the Adjacent Channel Leakage Ratio(ACLR) can be improved 2.3 dB, 2.5 dB at ${\pm}0.885$ MHz, ${\pm}1.23$ MHz offset frequency for CD-MA IS-95 2FA signals.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.32 no.2
• /
• pp.137-145
• /
• 2022

Objectives: This study aimed to identify PM₁₀ mass concentration levels and conduct peak identification during five tasks in agricultural works. Methods: We investigated five agricultural tasks in 12 farms, which were harvesting, plowing, sowing, planting, and decapitation. All samples were measured by using the portable aerosol spectrometer(PAS 1.108) and the aerosol monitor(SidePak AM520). The collected data were compared with the national PM₁₀ concentrations. They were calculated to descriptive statistics, independent t-test, or ANOVA, and the peak identification on time series graph. Results: The ten investigated farms showed no significant difference with the national PM₁₀ concentrations, but the two greenhouses(AM, 143.31, 85.16 ㎍/m³) showed significant difference(p<0.05). As a result of the peak identification, the harvesting tasks showed repeated peak occurrence with the background concentration level of about 50 ㎍/m³. For plowing and sowing tasks, the peak occurred intermittently when the working was conducted near the sampling sites. Among the five tasks, the arithmetic mean of the harvesting task was 138.84±294.71 ㎍/m³, which was significantly higher than the other tasks(p<0.05). In addition, the case of using a tractor was higher than the case of not using the tractor(p<0.05), and the driver's seat showed the highest concentration(AM, 95.81 ㎍/m³). Conclusions: Works in greenhouses might have exposure to PM₁₀, while outdoor works is similar to general atmospheric PM₁₀ concentration levels. However, there is a possibility of intermittent exposure to high concentrations of PM₁₀ depending on the characteristics of agricultural tasks.

• Journal of Environmental Science International
• /
• v.14 no.5
• /
• pp.463-471
• /
• 2005

This study is designed to investigate the characteristics of $PM_{10}$ concentration and the chemical composition of heavy metallic components in the $PM_{10}$ sampled in western Busan from March to May, 2003. $PM_{10}$measurement was done during springtime of 2003, totaling 29 days: 9 days in March, 10 days in April and 10 days in May. With a sampling time of 24 hours, it started 9:00 AM on that day and ended 9:00 AM the next day. The mean contribution ratio of soil during springtime was $10.3\%$. Al had a significant correlation with Ca, Fe, Mg and Si and little correlation with Na, Ni and Zn.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.187-190
• /
• 1999

In order to predict the effect of power amplifier non-linearity for digital modulated signal, this paper analyses the adjacent channel power ratio(ACPR) with the various AM-to-PM distortion levels. As the phase distortion increases from 0$^{\circ}$ to 12$^{\circ}$ at 1㏈compression point by 2.4$^{\circ}$ step, the input power level which satisfies the required ACPR decreases from 3.5㏈ to 6.5㏈ less than the 1㏈ compression input power.

• International journal of advanced smart convergence
• /
• v.10 no.4
• /
• pp.45-51
• /
• 2021

Polar transmitter can support multi-band and multi-mode operation. The efficiency of frequency usage can be increased if polar transmitters can transmit multi-carrier signals. In this paper the configuration of polar transmitters is investigated to generate multi-carrier signals. Spectrum and CCDF Simulation results of two-carrier signals generated by the polar transmitter can be used to design of PM and AM path in a polar transmitter.