• Journal of Broadcast Engineering
• /
• v.24 no.4
• /
• pp.670-675
• /
• 2019

AM radio broadcasting has the advantage that the sound quality is lower than that of FM radio but the service area is wide and at night it can be transmitted even to overseas due to ionospheric reflection. AM radio broadcasts usually transmit large amounts of several tens to several hundreds of kilowatts (KW), requiring a lot of power, which is a financial burden on broadcasters. Recently, it is required to introduce a way to reduce the power of AM radio broadcasting in Korea. Therefore, it is possible to save a certain amount of power compared to the conventional AM radio broadcasting, and it is possible to maintain the existing license service area and sound quality, and what policies are needed to introduce the technology. In this paper, we predict the reduction of transmission power when a high efficiency transmission system is applied to existing AM radio broadcasting transmission system. As a result of the research, AMC adopting the high efficiency transmission method instead of the conventional AM radio transmission method, and when the modulation ratio of AM radio is 70%, if -3 dB companding is applied, the annual transmission power charge is decreased from 5,185,838,160Won to 3,528,900,086Won with saving of 32.0%, When -6 dB companding is applied, it is expected to be reduced to 2,608,378,934Won, which is 49.7% savings.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.3
• /
• pp.514-522
• /
• 2015

In Microwave Radio Link, it is necessary to consider the radio fading to consistently assure the radio link of the high quality as the distance. If the fixed modulation is used for the microwave radio link, it is difficult to keep the high availability of link for the case of the long distance. Adaptive Modulation(AM) provide good quality on microwave link, but the application of the only-AM is not enough to provide the availability assurance due to the fluctuating characteristics of link capacity. Our previous study has proposed the improvement method of transmission in association with the distance, however the previous method needed to make up for the common application. There was no suggestion of a mathematical formula with a variable. In this paper, we propose an optimized Adaptive Transmission Techniques with calculating formula of the priority traffic transmission capacity based on AM in consideration of the fade margin for the availability assurance as the distance and the comparison of the channel bandwidth for Long-distance Radio Link.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.4
• /
• pp.149-158
• /
• 2007

A In the rapidly changing media environment, radio needs to be digitized in order to provide regular compatible service. Especially, most medium high frequency Medias have program contents thar are similar to the standard FM bandwidth, so digitizing radio will bring less effect than it is expected. However, the characteristics of radio medias are mobility, individuality, site-to-site, wide service coverage, immediate delivery and publicity, so it is necessary to study the future of radio media to provide continuous services, moreover, the main discussion regarding balanced development between medias will be the trend of the digitization of radio. Also it is easy and will cost less to change compared to other medias. AM was the first media to broadcast in Korea, and its network is spread all over Korea, also the receivers are the most widely distributed which means the signal reaches everywhere in Korea. In this study, the proper service model for AM digital radio is provided in this environment in which all Medias are rapidly digitizing due to the advancement of digital technology. The results of experimental are based on library study and KBS data of sound wave.

• Journal of Broadcast Engineering
• /
• v.17 no.6
• /
• pp.990-1003
• /
• 2012

In this paper, the possibility and necessity of the digital broadcasting propulsion in AM and FM is presented based on DRM and DRM+ transmission modes, They are the members of series technological family in digital radio development. As the frequency utilization, the application of DRM+ is flexible in any mode such as IN-BAND or OUT-OF-BAND. When the digital audio broadcasting is planned at LOW-VHF bandwidth such as TV channel No.5 and NO.6 being adjacent to FM band and OUT-Of-BAND DRM+ technology is applied, there is no collision and jamming. Particularly, in the IN-BAND Hybrid mode, it is mentioned that there was the difficulty problem for multiple SFN transmitters uses. Not like the IN-BAND mode the OUT-OF-BAND mode lets multiple transmitters, because neighbor transmitters do not interfere each other. Digital transmitter can be combined with the existing FM transmitter. The intensity of power and size of area can be easily determined according to local broadcasters' condition. And the OUT-OF-BAND mode is advantageous for AM/FM integration in digital radio receiver manufacturing, which makes the conversion schedule much shorter.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.3 no.4
• /
• pp.235-243
• /
• 2008

In this paper, a software-based Digital Radio Modiale(DRM) receiver is implemented on a Digital Signal Processor(DSP). DRM stands for the European radio broadcasting standard to bring AM radio into digital radio, designed to work at frequencies below 30MHz. DRM can offer various data services such as text messaging and slideshow services as well as audio services. The DRM receiver implemented on the Tensilica DSP core performs well at low signal strength indication of -102dBm.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.9
• /
• pp.2261-2266
• /
• 2009

A novel adaptive phase calibration method is proposed for nonlinear amplifiers. Based on the adaptive process of simple phase vector calculations, the AM/PM distortion can be significantly reduced for various input power. The performance of the proposed method is evaluated for up to 80 % improvements in AM/PM distortions, compared with the distortion of a conventional amplifier. Moreover, by means of an additional envelope-compensation technique, the improvement of the adjacent channel power ratio (ACPR) is presented.

• Journal of Advanced Navigation Technology
• /
• v.10 no.3
• /
• pp.256-262
• /
• 2006

This paper proposes a new predistortion linearizer to compensate for AM/AM and AM/PM in the nonlinear characteristics of amplifier. This consists of common-emitter amplifier and schottky diode that is connected between emitter and ground. When effective resistance of the schottky diode with bias condition varies, common-emitter amplifier with series feedback has a increase of amplitude and expansion of phase. This makes a amplifier nonlinear characteristics are to be improved. The proposed linearizer and amplifier has been manufactured and tested to operate in cellular base station frequency (869~894MHz). The test results show that third order intermodulation distortion (IMD3) cab be removed by more than 10.4dB in case of CW 2-tone signals ${\Delta}f$=1MHz, and the adjacent channel power ratio (ACPR) also can be improved by more than 9.6dB for CDMA IS-95 1FA signals.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.11A
• /
• pp.1059-1065
• /
• 2010

Recently, analog broadcasting are being converted into digital radio broadcasts, Among the various ways that HD Radio is a candidate for the U.S. approach, Digital Radio will transmit a digital signal to existing analog FM/AM. It provides clear sound quality, traffic information, weather information and various value-added services. In addition, the converted digital radio will be able to meet demand to growing demand for analog FM. In this paper, Digital FM Radio system in the same frequency band using electric field strength of the received digital radio broadcasting interference effects were analyzed. And Digital FM Radio Receiver interference effects were analyzed by interference signal power and signal power. Results were confirmed by applying equation at minimum field strength and SNR.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.16 no.4
• /
• pp.397-410
• /
• 2018

When considering the long-term safety assessment of spent-nuclear fuel management, americium is one of the most radio-toxic actinides. Although spectroscopic methods are widely used for the study of actinide chemistry, application of those methods to americium chemistry has been limited. Herein, we purified $^{241}Am$ to obtain a highly pure stock solution required for spectroscopic studies. Quantitative and qualitative analyses of purified $^{241}Am$ were carried out using liquid scintillation counting, and gamma and alpha radiation spectrometry. Highly sensitive absorption spectrometry coupled with a liquid waveguide capillary cell and time-resolved laser fluorescence spectroscopy were employed for the study of Am(III) hydrolysis and oxalate (Ox) complexation. $Am^{3+}$ ions under acidic conditions exhibit maximum absorbance at 503 nm, with a molar absorption coefficient of $424{\pm}8cm^{-1}{\cdot}M^{-1}$. $Am(OH)_3(s)$ colloidal particles formed under near neutral pH conditions were identified by monitoring the absorbance at around 506-507 nm. The formation of ${Am(Ox)_3}^{3-}$ was detected by red-shifts of the absorption and luminescence spectra of 4 and 5 nm, respectively. In addition, considerable enhancements of the luminescence intensities were observed. The luminescence lifetime of ${Am(Ox)_3}^{3-}$ increased from 23 to 56 ns, which indicates that approximately six water molecules are replaced by carboxylate ligands in the inner-sphere of the Am(III). These results suggest that ${Am(Ox)_3}^{3-}$ is formed through the bidentate coordination of the oxalate ligands.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.2
• /
• pp.220-227
• /
• 2011

With the rapid development of mobile communication technology, the technologies based on the diverse digital modulation schemes have been used for the frequency range of over 800 MHz. The only radiation immunity has been tested using only AM signal based on IEC 61000-4-3 without any consideration of the influence of electromagnetic radiation in Korea. However, it has not been tested by wideband digital modulation signals such as cdmaone(IS-95), WCDMA and PM signal. The purpose of this study was to review the standards. In addition, the input signals were analyzed and tested considering the environments in Korea. The results showed that the devices were influenced by digital modulation signal or PM signal more than by AM signal.