• 한국재료학회지
• /
• 제21권8호
• /
• pp.468-475
• /
• 2011

[ $LaMeO_3$ ](Me = Cr, Co) powders were prepared using the polymeric precursor method. The effects of the chelating agent and the polymeric additive on the synthesis of the $LaMeO_3$ perovskite were studied. The samples were synthesized using ethylene glycol (EG) as the solvent, acetyl acetone (AcAc) as the chelating agent, and polyvinylpyrrolidone (PVP) as the polymer additive. The thermal decomposition behavior of the precursor powder was characterized using a thermal analysis (TG-DTA). The crystallization and particle sizes of the $LaMeO_3$ powders were investigated via powder X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), and particle size analyzer, respectively. The as-prepared precursor primarily has $LaMeO_3$ at the optimum condition, i.e. for a molar ratio of both metal-source (a : a) : EG (80a : 80a) : AcAc (8a) inclusive of 1 wt% PVP. When the as-prepared precursor was calcined at $700^{\circ}C$, only a single phase was observed to correspond with the orthorhombic structure of $LaCrO_3$ and the rhombohedral structure of $LaCoO_3$. A solid-electrolyte impedance-metric sensor device composed of $Li_{1.5}Al_{0.5}Ti_{1.5}(PO_4)_3$ as a transducer and $LaMeO_3$ as a receptor has been systematically investigated for the detection of NOx in the range of 20 to 250 ppm at $400^{\circ}C$. The sensor responses were able to divide the component between resistance and capacitance. The impedance-metric sensor for the NO showed higher sensitivity compared with $NO_2$. The responses of the impedance-metric sensor device showed dependence on each value of the NOx concentration.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1341-1342
• /
• 2006

Electrical characteristics of field-effect thin film transistors (TFTs) with p-channels of CdTe/CdHgTe core-shell nanocrystals are investigated in this paper. For the fabrication of bottom- and top-gate TFTs, CdTe/CrHgTe nanocrystals synthesized by colloidal method are first dispersed on oxidized p+ Si substrates by spin-coating, the dispersed nanoparticles are sintered at $150^{\circ}C$ to form the channels for the TFTs, and $Al_{2}O_{3}$ layers are deposited on the channels. A representative bottom-gate field-effect TFT with a bottom-gate $SiO_2$ layer exhibits a mobility of $0.21cm^2$/ Vs and an Ion/Ioff ratio of $1.5{\times}10^2$ and a representative top-gate field-effect TFT with a top-gate $Al_{2}O_{3}$ layer provides a field-effect mobility of $0.026cm^2$/ Vs and an Ion/Ioff ratio of $2.5{\times}10^2$. $Al_{2}O_{3}$ was deposited for passivation of CdTe/CdHgTe core-shell nanocrystal layer, resulting in enhanced hole mobility, Ior/Ioff ratio by 0.25, $3{\times}10^3$, respectively. The CdTe/CdHgTe nanocrystal-based TFTs with bottom- and top gate geometries are compared in this paper.

• 한국전기전자재료학회논문지
• /
• 제20권4호
• /
• pp.352-356
• /
• 2007

The Ni/Cr/Al/Cu (51/41/4/4 wt%) thin films were deposited by using DC magnetron sputtering method for the application of the resistors having low TCR (temperature coefficients of resistance) and high resistivity from the former printed-results[3]. The TCR values measured on the as-deposited thin film resistors were less than ${\pm}10\;ppm/^{\circ}C$ and $-6{\sim}+1\;ppm/^{\circ}C$ after annealing and packaging process. The TCR values were $-3{\sim}1\;ppm/^{\circ}C$ (ratio of variation : about 0.02 %) and $-30{\sim}20\;ppm/^{\circ}C$ (ratio of variation : about $0.5{\sim}1\;%$) for the thermal cycling and PCT (pressure cooker test), respectively. It was confirmed that the reliability properties of the thin film resistor were good for electronic components.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권5호
• /
• pp.135-141
• /
• 2021

The study aims to examine the impact of liquidity and solvency management on the financial performance of Jordanian manufacturing companies listed on the Amman Stock Exchange, for a period of 10 years from 2010 to 2019. The size of the company was used as a control variable. The study employs Return on Assets (ROA) and Earnings Per Share (EPS) to measure financial performance. Current ratio (CR) and total debts to total assets were used as proxies for liquidity and solvency management, while logarithm of total assets was used to measure the size. Correlation and multi regression analyses have been applied to analyze the data. The results show a statistically significant impact of independent and control variables (liquidity and solvency management and the size of the company) on financial performance, while the detailed results of the hypotheses indicate that liquidity has an insignificant reverse impact on financial performance. With respect to other variables, there is a significant positive impact of size on performance and a significant negative impact of solvency on performance. The study suggests in light of results, increasing investments in companies' assets by focusing on internal financing, such that large-sized companies with low leverage will have a good performance.

• 환경영향평가
• /
• 제16권5호
• /
• pp.327-340
• /
• 2007

The $PM_{10}$ and $PM_{2.5}$ aerosols were collected at Busan from March to May, 2005, and the concentrations of some metallic elements were analysed to study their characteristics. The mean concentration of $PM_{10}$ was $66.5{\pm}23.0{\mu}g/m^3$ with a range of 22.2 to $118.1{\mu}g/m^3$. The mean concentration of $PM_{2.5}$ was $46.1{\pm}17.2{\mu}g/m^3$ with a range of 9.7 to $83.3{\mu}g/m^3$. The ratio of $PM_{2.5}/PM_{10}$ was 0.69 at Busan. The distribution of metallic elements for $PM_{10}$ and $PM_{2.5}$ were Cd${\ldots}$ ${\ldots}$ $PM_{10}$ were $94.9{\mu}g/m^3$ and $63.7{\mu}g/m^3$, respectively. And The mean mass concentrations of Asian dust and non Asian dust in $PM_{2.5}$ were $56.9{\mu}g/m^3$ and $45.1{\mu}g/m^3$, respectively. The mean values of crustal enrichment factors for five elements (Cd, Cu, Pb, V and Zn) were all higher than 10, possibly suggesting the influence of anthropogenic sources. The soil contribution ratios for $PM_{10}$ and $PM_{2.5}$ were 20.5% and 19.4, respectively.

• 한국해양학회지:바다
• /
• 제4권3호
• /
• pp.198-207
• /
• 1999

시화호 내 5개 정점에서 채취한 주상시료들을 지화학적으로 분석하여 시화방조제 건설이후 퇴적환경 및 중금속오염에 대해 연구하였다. 시화호내 퇴적환경은 유기물의 C/N비와 C/S비에 의해 무산소환경, 산화환경, 그리고 두 환경이 공존하는 지역으로 세분되었다. 산화환원환경을 지배하는 요인은 수심과 퇴적물의 공급차인것으로 사료된다. 주상시료에서 분석된 지화학적 원소중 Mn-U-Mo간의 상관관계는 각 정점간의 산화 환원환경의 지시자로 사용이 가능하다. 주상시료들의 Al과 Ti 함량은 퇴적물특성에 의해 구분되며, 5개 중금속(Cr, Ni, Cu, Zn 및 Pb)함량은 중금속에 의한 오염정도를 지시한다. 중금속의 상대적 함량은 방조제에 가까운 시화호 중심부분에서 보다 안산-반월공단에 가까운 지역에서 높게 축적되어 있다. 특히 주상시료의 표층퇴적물은 시화호 중앙부보다 시화-반월공단쪽이 약 2-8배 정도로 중금속축적이 높다.

• 한국분말재료학회지
• /
• 제24권4호
• /
• pp.292-297
• /
• 2017

A metallic oxide layer of a heat-resistant element contributes to the high-temperature oxidation resistance by delaying the oxidation and has a positive effect on the increase in electrical resistivity. In this study, green compacts of Fecralloy powder mixed with amorphous and crystalline silica are oxidized at $950^{\circ}C$ for up to 210 h in order to evaluate the effect of metal oxide on the oxidation and electrical resistivity. The weight change ratio increases as per a parabolic law, and the increase is larger than that observed for Fecralloy owing to the formation of Fe-Si, Fe-Cr composite oxide, and $Al_2O_3$ upon the addition of Si oxide. Si oxides promote the formation of $Al_2O_3$ and Cr oxide at the grain boundary, and obstruct neck formation and the growth of Fecralloy particles to ensure stable electrical resistivity.

• 한국결정성장학회지
• /
• 제8권4호
• /
• pp.532-538
• /
• 1998

한국산 천연베릴을 잉요하여 온도구배융제환류법에 의해 에메랄드($3BeO{\cdot}Al_2O_3{\cdot}6SiO_2:Cr^{3+}$) 단결정이 성장되었다. 리튬-몰리브데늄-바나디움 산화물계 융제는 $(MoO_3+V_2O_5)/Li_2O$, 와 $V_2O_5-Li_2O$를 서로 다르게 용융한 2종류의 융제를 혼합하여 제조하였다. 융제의 최적 조성은 산화몰리브데늄.바나디움에 대한 산화리튬의 몰비($(MoO_3+V_2O_5)/Li_2O$)가 3몰이었고 융제첨가제는 Li2O량에 대하여 $K_2O$ 또는 $Na_2O$를 0.2mole% 이내로 치환하였다. 베릴원료의 용융 농도는 융제량에 대하여 3~10% 함량이었고, $Cr_2O_3$ 발색제는 베릴량에 대하여 1%이었다. 융액은 용융, 성장, 회수 블록으로 나뉘어진 3지대 온도구배 결정성장로에서, $1100^{\circ}C$와 $1000^{\circ}C$ 사이의 안정상태에서 연속적으로 순환되도록 하였다. 에메랄드 단결정은 성장지대에서 950~$1000^{\circ}C$ 구간에서 1일 1회 2시간동안 열진동 처리하였을 때 미소핵의 생성이 억제된 대형 단결정을 성장시킬 수 있었다. 육각주상 에메랄드 단결정의 우선성장방향은 c(0001) 바닥면이었고, m(1010) 기둥면에 수직이었다.

• Spatial Information Research
• /
• 제14권1호
• /
• pp.129-150
• /
• 2006

본 연구에서는 GIS 및 확률 기법을 이용하여 광상의 위치와 지질, 지화학 및 지구물리 자료들 간의 상관관계를 분석하고, 광상부존가능도(Mineral potential map) 작성 및 검증을 수행하였다. 연구지역은 1:25만 강릉도폭지역 a이며, 구축된 데이터베이스 자료는 1:25만 광상분포도, 지화학도, 지질도, 부우게 중력이상도, 자력이상도이다. 본 연구에 사용된 광상은 퇴적기원의 비금속광상(고령토, 도석, 규석, 운모, 연옥, 석회석, 납석)이다. 원소별 지화학도 작성은 채취된 각 시료 3,595개의 원소별 분석치를 이용하여 IDW 보간법으로 만들었다. 구축된 지화학도는 Al, Alkalinity, As, Ba, Ca, Cd, Co, Cr, Cu, Fe, K, Li, Mg, Mn, Mo, Na, Ni, Pb, Si, Sr, V, W, Zn, $Cl^-,\;F^-,\;{NO_2}^-,\;{NO_3}^-,\;{PO_4}^{3-},\;{SO_4}^{2-}$, pH, Eh 및 Conductivity로 총 32개이다. 이러한 광상과 관련 요인들 간의 상관관계는 확률기법인 weight of evidence를 적용하여 계산하였고, 이를 바탕으로 광상부존가능도를 작성하였다. 광상부존가능도는 wieght of evidence의 W+와 W- 값을 GIS 중첩분석에 적용하여 작성하였다. 계산된 광상부존가능지수는 기존 광상부존가능성을 정량적으로 설명하고 표현하며 검증할 수 있는 값이다. 각 기법을 이용하여 작성한 광상부존가능도의 검증결과는 85.66%의 정확도를 나타내었다.

• 환경영향평가
• /
• 제12권2호
• /
• pp.99-108
• /
• 2003

We collected and analyzed PM10 samples to account for the characteristics of heavy metallic elements for yellow sand and non-yellow sand during springtime of 2002 at Busan, The mean PM10 mass concentration for springtime of 2002 was $219.82{\mu}g/m^3$ with the maximum $787.50{\mu}g/m^3$ and the minimum $19.44{\mu}g/m^3$. The mean concentration of metallic elements contained in PM10 are shown as follows : Si>Ca>Fe>Al>Na, respectively. The ratio of mean PM10 mass concentration for yellow sand($362.7{\mu}g/m^3$) to that for non-yellow sand($48.3{\mu}g/m^3$) was 7.5, the significant positive correlation (P<0.05) was found between yellow sand and non-yellow sand. The metallic elements concentration ratios of yellow sand to the non-yellow sand were over 10 times for Al, Ca, Mg, 4~8 times for Fe, Si, Mn. But the concentration of Na, Cu, Zn for non-yellow sand was higher than those of yellow sand. The crustal enrichment factor of Cd, Cu, Pb, Zn, Cr, K, Mn, Na, Ni for yellow sand was higher that of non-yellow sand over 10 times, and concentration rate of soil particles of yellow sand was increased 2.3 times that of nonyellow sand.