• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.06b
• /
• pp.367-372
• /
• 2006

The objective of this study is to develop the alternative of the container transport vehicle of new type for the purpose of the increase of terminal productivity. In order to develop the alternatives, we analyze the technical specification of existing transport vehicles such as YT(Yard Trailer), S/C(Straddle Carrier), SHC(Shuttle Carrier), AGV(Automated Guided Vehicle) and investigate the operation and performance of transport vehicles to classify the technical generation. The development alternative of transport vehicle is presented in this study is very useful to advanced container terminal with higher productivity.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1998.03a
• /
• pp.209-213
• /
• 1998

This study considers flowshop scheduling problem related to flexible maufacturing cell in which consists of two machining centers, robots for loading/unloading, and an automated guided vehicle(AGV) for material handling between two machining centers. Because no machinng center has buffer storage for work in process, a machining center can not release a finished job until the empty AGV is available at that machining center. While the AGV cannot tranfer an unfinished job to a machining center until the machining center empty. In this paper, an new heuristic algorithm is given to find the sequence that minimize their makespan.

• Structural Engineering and Mechanics
• /
• v.45 no.4
• /
• pp.543-568
• /
• 2013

This study explores the floor micro-vibrations induced by the automated guided vehicles (AGVs) in liquid-crystal-display (LCD) factories. The relationships between moving loads and both the vehicle weights and speeds were constructed by a modified Kanai-Tajimi (MKT) power spectral density (PSD) function whose best-fitting parameters were obtained through a regression analysis by using experimental acceleration responses of a small-scale three-span continuous beam model obtained in the laboratory. The AGV induced floor micro-vibrations under various AGV weights and speeds were then assessed by the proposed regressional MKT model. Simulation results indicate that the maximum floor micro-vibrations of the target LCD factory fall within the VC-B and VC-C levels when AGV moves at a lower speed of 1.0 m/s, while they may exceed the acceptable VC-B level when AGV moves at a higher speed of 1.5 m/s. The simulated floor micro-vibration levels are comparable to those of typical LCD factories induced by AGVs moving normally at a speed between 1.0 m/s and 2.0 m/s. Therefore, the numerical algorithm that integrates a simplified sub-structural multi-span continuous beam model and a proposed regressional MKT moving force model can provide a satisfactory prediction of AGV-induced floor micro-vibrations in LCD factories, if proper parameters of the MKT moving force model are adopted.

• Journal of the Korea Society for Simulation
• /
• v.17 no.2
• /
• pp.91-103
• /
• 2008

In order to simulate the behavior of automated manufacturing systems, the performance of material handling systems should be measured dynamically. Multi-Agent technology could be well adapted for the development of simulator for distributed and intelligent manufacture systems. A multi-agent system is composed of one coordination agent and multiple application agents. Issues in AGVS simulator can be classified by the set-up and operating problems. Decisions on the number of vehicles, bi- or uni-directional guide-path, etc. are fallen into the set-up problem category, while deadlock tree algorithm and conflict resolution are in operating problem. In this paper, a multi-agent based deadlock-free simulator for automated guided vehicle system(AGVS) are proposed through the use of multi-agent technologies and the development of deadlock-free algorithm. In this AGVS simulator proposed, well-known Floyd algorithm is used to create AGVS Guide path, through which AGVS move. Also, AGVs avoid vehicle conflict and deadlock using check path algorithm. And Moving vehicle agents are operated in real-time control by coordination agent. AGV position is dynamically calculated based on the concept of rolling time horizon. Simulator receives and presents operating information of vehicle in AGVS Gaunt chart. The performance of the proposed algorithm and developed simulator based on multi-agent are validated through set of experiments.

• Journal of Korean Institute of Industrial Engineers
• /
• v.23 no.3
• /
• pp.559-580
• /
• 1997

It is essential to construct on efficient material flow system for the successful introduction of automated manufacturing systems. Automated Guided Vehicle System(AGVS) ploys a significant role more and more in modern manufacturing environments, because of the flexibility and the precision they offer. However, as the size and the complexity of systems increase, the problems of dispatching, routing and scheduling of AGVs became complicated due to their independent and asynchronous demands. In this paper, we review relevant papers, and provide a new and more efficient method for partitioning the AGV system by introducing the concept of Central Path. This method named Central Path design has advantages, since each partitioned workstation group is served by one AGV and the material handling between groups is performed by special AGV that is used for the Central Path. Therefore the congestion problems never occur. Furthermore Central Path Design has a high flexibility for alteration and extension of system. Finally, we demonstrate its efficiency using simulation.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2022.11a
• /
• pp.285-287
• /
• 2022

4차 산업환경에서 스마트 팩토리는 자동 자재 관리 시스템(Automated Material Handling System, AMHS)의 사용이 증가되고 있으며, 이로 인한 자재 관리의 효율성이 중요시되고 있다. 자동 무인 운반차(Automated Guided Vehicle, AGV)는 이러한 분야에 활용성이 높기 때문에 많은 연구와 발전이 이루어지고 있다[1]. 기존의 AGV System에 대한 연구들은 운영 방식 그리고 경로 유도 방식에 대한 연구가 집중되고 있어서, 실질적인 산업현장에서 요구하는 가격 절감에 대한 연구가 부족한 상황이다[2]. 따라서 본 논문에서는 AGV를 구동시키기 위해서 2개의 BLDC Motor를 하나의 DSP로 구현하는, 새로운 형태의 BLDC Motor 구동방식을 제안하고 실험으로 확인하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.12
• /
• pp.137-144
• /
• 2001

The major movement blocks of the container are the range between the apron and the designation points on yard in container terminals. The yard tractor drived by operator takes charge of it's movement in conventional container terminals. In automated container terminal, AGV(automatic guided vehicle) takes charge of a yard tractor's role and information of navigation path are ordered from upper control system. The automated container terminal facilities must have the docking system that guides landing zinc to execute high speed travelling and precision positioning. This paper describes the new docking method with the rotating LSB(laser slit beam) generator and two pair of photo receiver. The LSB generator is installed on the fixed ground and the photo receiver is implemented on the moving vehicle such as AGV. The proposed docking system is implemented to confirm it's function and accuracy. The accuracy of measured moving position is represented in ±5mm at 1 data sampling.

• Journal of Navigation and Port Research
• /
• v.29 no.8 s.104
• /
• pp.723-733
• /
• 2005

This paper presents a deadlock avoidance method for AGVs in automated container terminals. For a more efficient use of AGV traveling area, we divided the area into small-sized grids not enough to cover a whole AGV. Our deadlock avoidance method controls AGVs by identifying strongly connected components(SCCs) in a graph derived from the paths of AGVs on the grids. Also in this paper we suggest a route selection scheme which selects a route by predicting and comparing travel times of candidate routes by using a regression formula. Simulation experiments have shown that the proposed method can control AGVs for 48 hours without deadlocks and the count of AGV visits per QC is increased by $2\~10$ an hour.

• Journal of Korean Institute of Industrial Engineers
• /
• v.18 no.1
• /
• pp.121-139
• /
• 1992

AGVS(Automated Guided Vehicle Systems) in material handling have been used widely since late 1970s. Implementation of an AGVS generally requires substantial study to optimize the design and performance of guide-paths. Traditional mathematical approaches have been used with limited success to analyze AGVS. These approaches, however, do not provide a practical tool for guide-path designers. This paper presents a new approach based on rules in designing and assessing AGV guide-paths to improve the design of a closed-loop layout. A framework for the integrated approach is proposed, problem solving procedures are explained, and a case study is reported to demonstrate the framework. Deletion of seldom used guide-paths, and addition of bypasses to solve the congestion problem, are conducted interactively and iteratively through simulation experiments. To visualize the results, a graphic control program is developed and integrated with the AutoMod/AutoGram simulation package.

• Proceedings of the KIEE Conference
• /
• 1999.11c
• /
• pp.500-502
• /
• 1999

This thesis deals with study and implementation of a cross-coupling controller which can enhance the path-tracking performance of optically guided AGV(Automated Guided Vehicle). The AGV in this thesis is differential drive type and has front-side and rear-side optical sensors, which can identify the guiding path. When AGV from the path due to the inevitable error and the deviation must be corrected. It has been shown that compensation only the first term can lead to undesirable oscillatory results and even instability but compensating only the second term leads to a steady state offset error. Cross-coupling control directly minimizes the error by coordinating the motion of the two drive wheels. The cross-coupling controller is analyzed to evaluate its performance. The cross-coupling controller enhances transient performance of the controller is demonstrated by simulation and is compared with that of individual loop controller.