• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2003년도 ISIS 2003
• /
• pp.307-310
• /
• 2003

In the maritime container terminal, LMTT(Linear Motor-based Transfer Technology) is horizontal transfer system for the yard automation, which has been proposed to take the place of AGV(Automated Guided Vehicle). The system is based on PMLSM (Permanent Magnetic Linear Synchronous Motor) that is consists of stator modules on the rail and shuttle car (mover). Because of large variant of mover's weight by loading and unloading containers, the difference of each characteristic of stator modules, and a stator module's trouble etc., LMCPS (Linear Motor Conveyance Positioning System) is considered as that the system is changed its model suddenly and variously. In this paper, we will introduce the soft-computing method of a multi-step prediction control for LMCPS using DR-FNN (Dynamically-constructed Recurrent Fuzzy Neural Network). The proposed control system is used two networks for multi-step prediction. Consequently, the system has an ability to adapt for external disturbance, cogging force, force ripple, and sudden changes of itself.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.231-236
• /
• 2004

The area of flat glass panel displays such as LCD (Liquid crystal display) and PDP (Plasma display panel) has been increased more than 2 $\times$ 2 m$^2$ for productivity improvement. However, such a large panel area incurs large panel deflection during panel transfer using robots or AGV (Automated guided vehicle) systems. Therefore, electronic industries are making an effort to find an alternative transfer system for the large glass panels with small deflection. The air conveyor with porous pads is one plausible solution, but it becomes expensive because the large porous pads cost much and air consumption increases as the panel area increases. In this work, a simple air slit levitating conveyor was devised to lower the equipment cost and to reduce the air consumption of system. The air flow model between the LCD glass panel and conveyor was constructed and its validity was verified by experiments. To minimize the air consumption, the conveyor dimensions were optimized, and the air consumptions between the air conveyors with the air slit and that with the porous pad were compared.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 1998년도 추계학술대회논문집:21세기에 대비한 지능형 통합항만관리
• /
• pp.241-253
• /
• 1998

By the rapid expansion of containerization and intermodel transportation in international shipping since the 1970's, the larger containerships have emerged and concentrated their calls at a limitted number of ports. Moreover, large-scale container terminals have been built to accommodate the ever-larger containerships, and the mordernization of terminal facilities and many developments in information technology etc. have been brought out. Thus, unlimited competition has been imposed on every terminal with neighbouring ports in Japan, Singapore, Hongkong and Taiwan etc. The purpose of this study is invested to suggest how the container terminal operators cope with unlimited competition between local or foreign terminals. The results are suggested as follows : First, transshipment cargoes, which the added value is high, is to be induced. Second, the function of storage is given on On-Dock Yard. Third. Berth Pool Operation System is introduced, especially in Gamman Container Terminal and Kwangyang Container Terminal. Fourth, the cargo handling charges is decided by terminal operator.

• 제어로봇시스템학회논문지
• /
• 제7권4호
• /
• pp.326-333
• /
• 2001

This paper focuses on a method to connect mobile devices such as mobile robot. Automated Guided Vehicle (AGV) and Unmanned Container Transporter(UCT) to a fieldbus. In this paper, the IEEE 802.11 wireless LAN is used to extend a Profibus network for the mobile devices. In order to integrate these two networks, a gateway is developed using two threads and an internal buffer. Furthermore, a polling algorithm is applied at the gateway in order to satisfy real-time requirements on data communication, Finally, the performance measures such as data latency and throughput are experimentally evaluated on a wirelessly-extended Profibus network. The results shows the feasibility of the wireless extension of Profilbus for various mobile device.

• International Journal of Automotive Technology
• /
• 제6권5호
• /
• pp.545-554
• /
• 2005

Passive velocity field control (PVFC) was previously developed for fully mechanical systems, in which the motion task was specified by behaviors in terms of a velocity field and the closed-loop was passive with respect to the supply rate given by the environment input. However, the PVFC was only applied to a single manipulator. The proposed control law was derived geometrically and the geometric and robustness properties of the closed-loop system were also analyzed. In this paper, we propose a virtual passivity-based algorithm to apply decentralized control to multiple 3­wheeled mobile robotic systems whose subsystems are under nonholonomic constraints and convey a common rigid object in a horizontal plain. Moreover, it is shown that multiple robot systems ensure stability and the velocities of augmented systems converge to a scaled multiple of each desired velocity field for cooperative mobile robot systems. Finally, the application of proposed virtual passivity-based decentralized algorithm via system augmentation is applied to trace a circle and the simulation results is presented in order to show effectiveness for the decentralized control algorithm proposed in this research.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2004년도 추계학술대회
• /
• pp.311-316
• /
• 2004

LMTT는 항만 자동화를 위한 수평 이송이 가능하도록 설계된 셔틀카(shuttle car)와 격자구조의 레인에 부착된 스테이터 모듈 (stator module)로 구성된 PMLSM(Permanent Magnetic Linear Synchronous Motor)에 의해 구동된다 본 논문에서는 강도기준을 고려하고 경량화 설계를 위하여 셸(shell) 요소로 유한요소 모델링된 이동체(mover)의 구조최적설계를 수행하였다. 설계변수로는 가로 빔, 세로 빔, 휠 빔의 두께와 높이 방향의 치수를 결정하는 형상 변수를 포함시켰다. 목적함수로는 중량, 제한조건 함수로는 안전율이 고려된 응력으로 실정하였다.

• 한국항해항만학회지
• /
• 제28권6호
• /
• pp.541-548
• /
• 2004

본 논문에서는 항만 자동화를 위해 새로이 제안된 리니어 모터 기반 컨테이너 이송시스템에 지능제어기법을 이용하여 그 정밀도를 향상시키고자 한다. LMCTS(Linear Motor-based Container Transfer System)는 스케일의 거대함 때문에 일반 리니어 모터에서 중요시 되지 않는 정지마찰력과 디텐트럭(detent force)이 정밀제어에 큰 문제가 된다. 특히, 컨테이너 적제유무에 따라 시스템 자체가 급격히 변하므로 기존의 PID형 제어기로는 좋은 성능을 얻기 어렵다. 따라서 본 논문에서는 같은 구조를 갖는 두 개의 DR-FNN(Dynamically- constructed Recurrent Fuzzy Neural Network)를 제어기와 에뮬레이터로 구성하여 이러한 문제를 해결하고자 하였다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2005년도 춘계학술대회 논문집
• /
• pp.385-390
• /
• 2005

LMTT(Linear Motor-based Transfer Technology)는 항만 자동화를 위한 수평 이송 시스템이며, 셔틀카(shuttle car)와 격자구조의 레일에 부착된 스테이터 모듈(stator module)로 구성된 PLMSL(Permanent Magnetic Linear Synchronous Motor)에 의해 구동된다. 본 논문에서는 LMTT시스템 부품인 이동체(mover)의 경량화를 위하여 직교배열표 및 크리깅 방법을 이용하여 최적설계를 수행한다. 설계변수로는 가로빔, 세로빔, 휠빔의 두께와 높이 방향의 치수를 결정하는 형상변수를 포함시켰다. 목적함수로는 중량, 제한조건 함수로는 안전율이 고려된 응력으로 설정하였다. 본 연구에서 제시된 방법으로 구한 최적해를 민감도기반 최적설계로 구해진 최적해와 비교, 검토하였다.

• 한국항해항만학회지
• /
• 제29권5호
• /
• pp.415-420
• /
• 2005

LMTT는 항만 자동화를 위한 수평 이송이 가능하도록 설계된 셔틀카(shuttle car)하 격자구조의 레일에 부착된 스테이터 모듈(stator module)로 구성된 PMLSM(Permanent Magnetic Linear Synchronous Motor)에 의해 구동된다. 본 논문에서는 강도 및 강성기준을 고려하고 경량화 설계를 위하여 셀 요소로 유한요소 모델링된 이동체(mover)의 구조최적설계를 수행하였다. 설계변수로는 가로빔, 세로빔, 휠 빔의 두께와 가로빔 및 세로빔의 높이를 포함시켰다. 목적함수는 중량, 제한조건 함수는 안전율이 고려된 허용응력과 가로빔의 허용변위로 설정하였다.