• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.9
• /
• pp.2901-2907
• /
• 1996

Flatness of cold rolled strip is vital to the quality of the product and productivity of the mill. Therefore, in recent year requirement for flatness control in strip rolling have become increasingly severe. The necessity for more accurate automatic gauge control and automatic flatness control(AFC) has increased by customer's requirement for cold rolled steel sheets with thinner gauge and better flatness quality. In this paper, the performance and functions of AFC system installed on the 4 hi-reversing mill has been investigated under actual conditions. The test results are as follows : The more strip thickness is thick, the smaller the I-value. The I-value is a strain measured by stressometer. Complex distributions of strip tension are controlled to remove not only a quarter buckle but also a simple center wave and edge wave. The defects caused by poor flatness have been drastically decreased. And a proper coolant temperature for work roll cooling system on the AFC system is about $50~55^{\circ}C$.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.4 s.36
• /
• pp.345-354
• /
• 2005

In this paper collaboration of web-based distributed business systems is analyzed and the need of timely collaboration is derived and described in terms of inter-organizational contracts. A method of event-condition-action (ECA) rule based timely collaboration to meet the need and an active functionality component (AFC) to provide the method are proposed. The proposed method supports high level rule programming and event-based immediate processing so that system administrators and programmers can easily maintain the timely collaboration independently to the application logic. The proposed AFC uses HTTP protocol to be applied through firewalls. It is implemented using basic trigger facilities of a commercial DBMS for practical purpose.

• Clinical and Experimental Reproductive Medicine
• /
• v.43 no.2
• /
• pp.112-118
• /
• 2016

Objective: Ovarian reserve tests are commonly used to predict ovarian response in infertile patients undergoing ovarian stimulation. Although serum markers such as basal follicle-stimulating hormone (FSH) or random $anti-M{\ddot{u}}llerian$ hormone (AMH) level and ultrasonographic markers (antral follicle count, AFC) are good predictors, no single test has proven to be the best predictor. In this study, we developed appropriate equations and novel nomograms to predict the number of oocytes that will be retrieved using patients' age, serum levels of basal FSH and AMH, and AFC. Methods: We analyzed a database containing clinical and laboratory information of 141 stimulated in vitro fertilization (IVF) cycles performed at a university-based hospital between September 2009 and December 2013. We used generalized linear models for prediction of the number of oocytes. Results: Age, basal serum FSH level, serum AMH level, and AFC were significantly related to the number of oocytes retrieved according to the univariate and multivariate analyses. The equations that predicted the number of oocytes retrieved (log scale) were as follows: model (1) $3.21-0.036{\times}(age)+0.089{\times}(AMH)$, model (2) $3.422-0.03{\times}(age)-0.049{\times}(FSH)+0.08{\times}(AMH)$, model (3) $2.32-0.017{\times}(age)+0.039{\times}(AMH)+0.03{\times}(AFC)$, model (4) $2.584-0.015{\times}(age)-0.035{\times}(FSH)+0.038{\times}(AMH)+0.026{\times}(AFC)$. model 4 showed the best performance. On the basis of these variables, we developed nomograms to predict the number of oocytes that can be retrieved. Conclusion: Our nomograms helped predict the number of oocytes retrieved in stimulated IVF cycles.

• Korean Chemical Engineering Research
• /
• v.54 no.2
• /
• pp.234-238
• /
• 2016

Solid ash-free coal (AFC) samples recovered from solvent-extracted solution by vacuum drying, dilution precipitation and spray drying methods were compared in terms of physical properties and chemical structure. AFC was prepared by using Kideco coal (Indonesian sub-bituminous coal) and polar N-methyl-2-pyrrolidone (NMP) solvent as raw materials. The physical properties of the AFCs were characterized with proximate, ultimate, and calorific value analysis. In analyzing the chemical structure, FTIR and NMR were used. the proximate analysis showed much reduced ash in the AFCs compared to parent raw coal. The FTIR result showed that the extraction solvent was not fully removed from the AFC prepared by vacuum drying. However, the solvent was not detected in the AFC recovered by using dilution precipitation. Dilution precipitation has advantages over the other two methods, since it can be done at relatively low temperature and separate ash-free coal from extraction solvent more effectively.

• Transactions of the Korean hydrogen and new energy society
• /
• v.29 no.6
• /
• pp.559-569
• /
• 2018

Catalytic supports made of carbon have many advantages, such as high coking resistance, tailorable pore and surface structures, and ease of recycling of waste catalysts. Moreover, they do not require pre-reduction. In this study, ash-free coal (AFC) was obtained by the thermal extraction of carbonaceous components from raw coal and its performance as a carbon catalytic support was compared with that of well-known activated carbon (AC). Nickel was dispersed on the carbon supports and the resulting catalysts were applied to the steam reforming of toluene (SRT), a model compound of biomass tar. Interestingly, nickel catalysts dispersed on AFC, which has a very small surface area (${\sim}0.13m^2/g$), showed higher activity than those dispersed on AC, which has a large surface area ($1,173A/cm^2$). X-ray diffraction (XRD) analysis showed that the particle size of nickel deposited on AFC was smaller than that deposited on AC, with the average values on AFC ${\approx}11nm$ and on AC ${\approx}23nm$. This proved that heteroatomic functional groups in AFC, such as carboxyls, can provide ion-exchange or adsorption sites for the nano-scale dispersion of nickel. In addition, the pore structure, surface morphology, chemical composition, and chemical state of the prepared catalysts were analyzed using Brunauer-Emmett-Taylor (BET) analysis, transmission electron microscopy (TEM), scanning electron microscopy (SEM), x-ray diffraction (XRD), Fourier-transform infrared (FT-IR) spectroscopy, and temperature-programmed reduction (TPR).

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1998.06a
• /
• pp.1164-1167
• /
• 1998

• Proceedings of the Korean Magnestics Society Conference
• /
• 2001.10a
• /
• pp.124-125
• /
• 2001

• 한국전기화학회:학술대회논문집
• /
• 1999.04a
• /
• pp.79-79
• /
• 1999

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1500-1505
• /
• 2004

This paper presents the design and control of a small Brushless DC (BLDC) Motor for entertainment robots. In order to control the developed BLDC motor, Adaptive Fuzzy Control (AFC) scheme via Parallel distributed Compensation(PDC) is developed for the multi- input/multi-output plant model represented by the Takagi-Sugeno(TS) model. The alternative AFC scheme is proposed to provide asymptotic tracking of a reference signal for the systems with uncertain or slowly time-varying parameters. The developed control law and adaptive law guarantee the boundedness of all signals in the closed-loop system. In addition, the plant state tracks the state of the reference model asymptotically with time for any bounded reference input signal. The suggested design technique is applied to the velocity control of a developed small BLDC motor for entertainment robots.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.63-67
• /
• 2004

The problem is improving the positioning precision of a permanent magnet linear synchronous motor (PMLSM). Thus, this paper presents the design and realization of an adaptive dither to reduce the force ripple in PMLSM. A composite control structure is used, consisting of three components: a simple feed-forward component, a PID feedback component and an adaptive feed-forward compensator (AFC). Especially adaptive feed-forward component cancel out detent force using wavelet transformation. Computer simulation results verify the effectiveness of the proposed scheme for high precision motion trajectory tracking using the PMLSM