• 한국자기학회지
• /
• 제27권1호
• /
• pp.30-34
• /
• 2017

본 연구에서는 교환 결합력을 갖는 강자성/반강자성(AF) 박막에서 단자구 모델을 사용하여 교환 바이어스($H_{ex}$)의 각도 의존성을 계산하였으며, NiFe/MnIr 박막에서 측정한 결과와 비교 분석하였다. AF층 두께가 임계 두께 이상에서($t_{AF}$ > $t_c$) 계산한 $H_{ex}$의 각도 의존성은 전형적인 일방 이방성 특성을 보였으나, $0.5t_c$ < $t_{AF}$ < $t_c$에서는 $90^{\circ}$ 근처의 특정한 각도에서 AF 스핀의 고정에 의한 독특한 $H_{ex}$의 각도 의존성을 보였다. NiFe/MnIr(20 nm) 박막에서 측정한 $H_{ex}$의 각도 의존성은 전형적인 일방 이방성 특성을 보였으나, NiFe/MnIr(4 nm) 박막에서는 일방 이방성 특성과 AF 스핀의 고정에 의한 특성이 혼합된 결과를 보였으며, 이는 다결정 구조를 갖는 MnIr의 입도 분포 특성으로 설명되어짐을 알 수 있었다.

• The Plant Pathology Journal
• /
• 제26권2호
• /
• pp.121-129
• /
• 2010

We evaluated microbial populations and aflatoxin production in unhulled and white rice from rice processing complexes of the National Agricultural Cooperative Federation in five regions in Korea and identified three predominant Aspergillus species. Fungal and bacterial populations in rice samples were significantly different between regions in 2007. Aflatoxins were also detected and varied at the levels of 2.45 - 3.43 ng per g unhulled rice grain and 1.29 - 2.09 ng per g white rice grain. Unhulled rice generally detected higher level of aflatoxins than white rice regardless of sampling regions; however, no significant differences were found in Anseong and Cheonan in 2005 and Cheonan and Gimpo in 2007. Aflatoxin production between sampling regions was not different regardless of rice type and sampling year. Although the fungal diversity was highly distinct from region to region, three Aspergillus isolates were predominant in the rice samples; thus, representative isolates AC317, AF57, and AF8 were selected and identified based on their morphological and molecular characteristics. Consequently, isolates AC317, AF57, and AF8 were identified as A. candidus, A. flavus, and A. fumigatus, respectively. These fungi can produce mycotoxins that are harmful for consumers and thus it is important to detect and reduce the population of storage fungi in rice.

• 한국재료학회지
• /
• 제4권2호
• /
• pp.166-176
• /
• 1994

Ni기 초합금은 Co, Cr, Mo, W등의 고용 강화 원소와 AI, Ti, Nb, Ta 등의 $\gamma '$ 석출 강화 원소로 구성되어 있다. 초합금의 기계적 성질과 내산화성을 개선하기 위하여 희토류 원소를 재료 내부에 첨가하거나, 코팅 재료로써 사용하고 있다. 이들 희토류 원소는 $Al_2O_3, Cr_2O_3$등의 산화물의 종류에 따라 산화물의 성장 속도와 밀착성에 영향을 미친다. Hf함유 Ni기 초합금 AF115와 $AI_2O_3$ 함유 MA6000초합금 2종을 이온 코터를 이용, Yttrium 표면개질후, 온도 1273K-1473K에서 고온 산화 수 산호 피막의 성장 속도, 결정립, 내부 구조 및 내박리성에 미치는 Yttrium 의 영향을 조사하였다. AF115와 MA6000 초합금에 Yttrium코팅을 한 결과 내부 산화물의 성장에 현저한 변화가 있었다. Yttrium의 표면 개질에 의하여, AF115의 경우는 $AI_2O_3$ 주성분의 입계 집중과 Hf의 우선 산확 억제되고, 삼각 형태의 내부 산화물이 plate형으로 변화되었다. MA6000의 경우 $AI_2O_3$ 주성분의 산화층이$Cr_2O_3$주성분의 외부 산화층과$AI_2O_3$ 주성분의 내부층으로 변화되었다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2009년 추계학술발표대회
• /
• pp.47-47
• /
• 2009

용착금속의 미세조직은 크게 Acicular ferrite(AF), Ferrite with aligned second phase(FS), Primary ferrite(=Grain boundary Ferrite) 등으로 나눌 수 있다. 이 중 침상형 페라이트(AF)는 인성과 강도를 동시에 증가시킬 수 있으므로 이를 다량 확보하는 것이 용접산업의 관건이다. 본 연구에서는 침상형 페라이트 발생에 기여한다고 알려진 Ti 함량을 용착금속에서 단계적으로 조절하여 나타나는 미세조직과 특성변화를 관찰하였다. 모재는 HSB-600을 사용하였으며 용접재료는 ER100S-G급의 Ti가 함유되어 있는 것(A)과 미함유된 것(B)을 사용하였다. 모재 성분의 희석을 방지하기 위해 V-Groove 가공 후 Buttering 용접을 실시하였다. 중앙에 가공된 V-그루브에 이들 재료를 적절히 조합하고 용접(입열량 20kJ/cm)하여 Ti함유량을 총 4가지(0.002~0.025% Ti)로 제어하였다. 용접 후 각각의 시편에 대해 미세조직, 충격시험, O/N분석, 성분분석 등의 시험을 진행하였다. 미세조직 관찰결과 Ti함량이 증가할수록 AF는 증가하고 FS는 감소함을 확인할 수 있었으며 충격시험결과 Ti가 많이 함유된 시편일수록 더 낮은 연성취성 천이온도(DBTT)를 나타내었다. EDS와 SEM으로 관찰한 결과 Ti함량 증가에 따라 비금속개재물의 크기는 작아지고 밀도는 높아지는 것을 확인할 수 있었으며 개재물 내에서의 Ti함량도 더 많아지는 것을 확인 할 수 있었다.

• Journal of Welding and Joining
• /
• 제30권1호
• /
• pp.64-71
• /
• 2012

The characteristics of high heat input (342kJ/cm) EG (Electro Gas Arc) welded joint of EH36-TM steel has been investigated. The weld metal microstructure consisted of fine acicular ferrite (AF), a little volume of polygonal ferrite (PF) and grain boundary ferrite (GBF). Charpy impact test results of the weld metal and heat affected zone (HAZ) met the requirement of classification rule (Min. 34J at $-20^{\circ}C$). In order to evaluate the relationship between the impact toughness property and the grain size of HAZ, the austenite grain size of HAZ was measured. The prior austenite grain size in Fusion line (F.L+0.1 mm) was about $350{\mu}m$. The grain size in F.L+1.5 mm was measured to be less than $30{\mu}m$ and this region was identified as being included in FGHAZ(Fine Grain HAZ). It is seen that as the austenite grain size decreases, the size of GBF, FSP (Ferrite Side Plate) become smaller and the impact toughness of HAZ increases. Therefore, the CGHAZ was considered to be area up to 1.3mm away from the fusion line. Results of TEM replica analysis for a welded joint implied that very small size ($0.8\sim1.2{\mu}m$) oxygen inclusions played a role of forming fine acicular ferrite in the weld metal. A large amount of (Ti, Mn, Al)xOy oxygen inclusions dispersed, and oxides density was measured to be 4,600-5,300 (ea/mm2). During the welding thermal cycle, the area near a fusion line was reheated to temperature exceeding $1400^{\circ}C$. However, the nitrides and carbides were not completely dissolved near the fusion line because of rapid heating and cooling rate. Instead, they might grow during the cooling process. TiC precipitates of about 50 ~ 100nm size dispersed near the fusion line.

• 한국세라믹학회지
• /
• 제20권1호
• /
• pp.13-18
• /
• 1983

The investigations have been carried out to study the characteristics of limestone using in Korean cement industry with prime interests in the dissociation and thermal phase changes of limestone between 90$0^{\circ}C$ and 140$0^{\circ}C$ The range of decomposition temperature of limestone was 840-87$0^{\circ}C$ and it was considered that the temperature was lowered by impurities in the limestone. The more the impurities and the finer the grain size of quartz in limestone the lower temperature was applied in forming $C_2S$ mineral the temperature of about 100$0^{\circ}C$. The major clinker minerals such as $C_3S$, $C_2S$, $C_3A$ and $C_4AF$ were formed in most of limestone when the firing temperature was up to 130$0^{\circ}C$.

• 한국재료학회지
• /
• 제30권4호
• /
• pp.184-196
• /
• 2020

In this study, effects of carbon and nickel on microstructure and low temperature Charpy impact properties of HSLA (high strength low alloy) steels are investigated. To understand the complex phase transformation behavior of HSLA steels with high strength and toughness before and after welding processes, three kinds of HSLA steels are fabricated by varying the carbon and nickel content. Microstructure analysis, low temperature Charpy impact test, and Vickers hardness test are performed for the base metals and CGHAZ (coarse-grain heat affected zone) specimens. The specimens with the lowest carbon and nickel content have the highest volume fraction of AF, the lowest volume fraction of GB, and the smallest GB packet size. So, the low temperature Charpy absorbed energy of the CGHAZ specimen is the highest. The specimens with increased carbon and nickel content have the lowest volume fraction of AF, the highest volume fraction of GB, and the largest GB packet size. So, the low temperature Charpy absorbed energy of the CGHAZ specimen is the lowest.

• 한국재료학회지
• /
• 제30권3호
• /
• pp.123-130
• /
• 2020

In this study, two types of thick steel plates are prepared by controlling carbon equivalent and nickel content, and their microstructures are analyzed. Tensile tests, Vickers hardness tests, and Charpy impact tests are conducted to investigate the correlation between microstructure and mechanical properties of the steels. The H steel, which has high carbon equivalent and nickel content, has lower volume fraction of granular bainite (GB) and smaller GB packet size than those of L steel, which has low carbon equivalent and nickel content. However, the volume fraction of secondary phases is higher in the H steel than in the L steel. As a result, the strength of the L steel is higher than that of the H steel, while the Charpy absorbed energy at -40 ℃ is higher than that of the L steel. The heat affected zone (HAZ) simulated H-H specimen has higher volume fraction of acicular ferrite (AF) and lower volume fraction of GB than the HAZ simulated L-H specimen. In addition, the grain size of AF and the packet sizes of GB and BF are smaller in the H-H specimen than in the L-H specimen. For this reason, the Charpy absorbed energy at -20 ℃ is higher for the H-H specimen than for the L-H specimen.

• Journal of Microbiology and Biotechnology
• /
• 제17권10호
• /
• pp.1629-1637
• /
• 2007

An immunochromatography (ICG) strip test using a nanocolloidal gold-antibody probe was developed and optimized for the rapid detection of aflatoxin B1 (AFB1). A monoclonal antibody specific to AFB1 was produced from the cloned hybridoma cell (AF78), coupled with nanocolloidal gold, and distributed on the conjugate pad of the ICG strip test. The visual detection limit of the ICG strip test was 0.5 ng/ml, and this method showed a cross-reaction to aflatoxin B2, G1, and G2. In total, 172 grain and feed samples were collected and analyzed by both the ICG strip test and HPLC. The results of the ICG strip test showed a good agreement with those obtained by HPLC. These results indicated that the ICG strip test has a potential use as a rapid and cost-effective screening tool for the determination of AFB1 in real samples and could be applied to the preliminary screening of mycotoxin in food and agricultural products, generating results within 15 min without complicated steps.

• 한국자기학회지
• /
• 제26권2호
• /
• pp.50-54
• /
• 2016

본 연구에서는 교환 결합력을 갖는 CoFe/MnIr 박막 재료의 각도에 따른 강자성 공명 선폭 변화 특성을 분석하였다. 선폭의 최대 및 최소값은 교환 결합력에 의한 일방 이방성의 자화 곤란축 및 용이축 방향에서 각각 관측되었으며, 고정된 MnIr의 스핀에 의한 교환 바이어스 자기장의 각도 의존성과 일치하였다. 따라서, 최대 선폭은 고정된 MnIr 스핀의 반대 방향에서 자기장 방향으로 꼬여있는(twist) CoFe의 자화에 기인한다. 한편, CoFe 단일 박막에 비하여 증가된 최소 선폭은 각도 의존성이 없는 회전 이방성 자기장과 관련되며, 선폭 증가의 원인은 MnIr 입도의 자화 용이축 분포 특성으로 설명된다.