• The Journal of Korean Medicine
• /
• v.30 no.4
• /
• pp.108-117
• /
• 2009

Objective: To compare the contents of heavy metals, residual pesticides and sulfur dioxide before/after a decoction. Methods: The heavy metal contents before/after a decoction were measured by inductively-coupled plasma atomic emission spectrometer (ICP-AES) and mercury analyzer. In order to analyze pesticides in 5 samples we used simultaneous multi-residue analysis of pesticides by GC/ECD, which was followed by GC/MSD analysis to confirm the identity of the detected pesticide in each sample. In addition, the contents of sulfur dioxide ($SO_2$) were performed by Monier-Williams distillation method. Results: 1. The mean values of heavy metal contents (mg/kg) for the samples were as follows: Sipjeondaebo-tang (before decoction - Pb; 1.163, Cd; 0.257, As; 0.080 and Hg; 0.016, after decoction - Pb; 0.059, Cd; 0.007, As; 0.006 and Hg; 0.0003), Palmul-tang (before decoction - Pb; 1.181, Cd; 0.242, As; 0.152 and Hg; 0.014, after decoction - Pb; 0.067, Cd; 0.008, As; 0.008 and Hg; 0.0003), Sagunja-tang (before decoction - Pb; 1.285, Cd; 0.283, As; 0.063 and Hg; 0.012, after decoction - Pb; 0.047, Cd; 0.009, As; 0.004 and Hg; not detected) and Samul-tang (before decoction - Pb; 1.025, Cd; 0.169, As; 0.099 and Hg; 0.013, after decoction - Pb; 0.065, Cd; 0.007, As; 0.010 and Hg; 0.001). 2. Contents (mg/kg) of residual pesticides before/after a decoction were not detected in any samples. 3. Contents (mg/kg) of sulfur dioxide ($SO_2$) before a decoction in Sipjeondaebo-tang, Palmul-tang, Sagunja-tang and Samul-tang exhibited 5.0, 6.0, 14.0 and 6.9, respectively. However, contents of sulfur dioxide after a decoction were not detected in any samples. Conclusion: These results will be used to establish a criterion for heavy metals, residual pesticides and sulfur dioxide.

• Economic and Environmental Geology
• /
• v.36 no.5
• /
• pp.357-363
• /
• 2003

The objective of this study is to investigate background levels of As and heavy metals (Cd, Cu, Pb and Zn) and their dietary intakes from white rice produced at various provinces in Korea during 2000. Except Jeju-do, sixty-three rice grain samples were taken at 8 provinces and analyzed for the elements using ICP-AES after acid digestion. The average contents of hi, Cd, Cu, Pb and Zn in the samples were 0.126, 0.040, 1.96, 0.361 and 16.6 mg/kg(DW), respectively. These levels are within the ranges of worldwide average concentrations in rice grains reported by various research. Assuming the rice consumption of 256 g/day by overall households in Korea, the amount of daily intake of As, Cd, Cu, Pb and Zn by the rice were estimated to be 32.3, 10.2, 502, 92.4 and 4,250 ${\mu}g$/day, respectively. Those amount of daily intakes of the elements by the rice are within the WHO's guide for trace elements, however, rice consumption is one of the most important sources of dietary intake of As and some heavy metals in Korean population.

• Analytical Science and Technology
• /
• v.13 no.2
• /
• pp.158-165
• /
• 2000

The purity of gypsum and quantitation of impurities of flue gas gypsum will not only play an important role in deciding of the optimal condition during a trial run of FGD (flue gas desulfurization), but also can be utilized in quality control of gypsum. The purity of gypsum can be determined from combined water, sulfur trioxide and calcium concentration. We found that the thermal analysis by TGA (thermogravimetric analysis) was the most accurate and convenient method to determine the purity of gypsum. This method will be done in a hour and the results were reproducible. On the other hand, the best way of the analysis of impurities in gypsum was fusion method using $LiBO_2$ as a fusion agent. We also determined the amount of $CO_2$ gas to analyze magnesium carbonate and calcium carbonate contents. The analyses of combined water by TGA, fusion method followed by ICP-AES (inductively coupled plasmaatomic emission spectroscopy) and determination of $CO_2$ amount can lead to more accurate and convenient method for gypsum analysis.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.1
• /
• pp.30-36
• /
• 1999

This paper describes the relationship between the bending strength properties of sloped finger-jointed woods and the acoustic emissions (AEs) generated during the test. Pinus densiflora pieces were cut in sloped-finger types and glued with four kinds of adhesives (polyvinyl acetate, polyvinyl-aeryl, oilic urethane and resorcinol-phenol resin). The results were as follows: The lower the bending strength(load) was, the earlier the generation time of AE event count got and the higher the increasing rate of AE event count became in the sloped finger-jointed specimens bonded with polyvinyl acetate and oilic urethane resin adhesives. Therefore, the slope from load-AE cumulative event count curve was very steep. The AE event count for resorcinol-phenol resin adhesive obtained even from low load level was abundant. The AE event count continuously increased as load increased and the event count was much more than one in the other conditions. The slope from load-AE cumulative event count curve was very gentle compared with other conditions. The patterns of AE event count and count were very similar. The relationship between the MOR and the AE parameter from load and AE cumulative event count in the early stage of the sloped finger-jointed specimens bonded with polyvinyl acetate, oilic urethane and resorcinol-phenol resin adhesives was much greater than that between the MOE and the MOR. Therefore, the AE signals obtained during bending test are useful for estimating the strength of sloped finger-jointed specimens.

• Analytical Science and Technology
• /
• v.12 no.4
• /
• pp.318-325
• /
• 1999

Sludges from the wastewater of hanji production were analysed to see that sludges from the bleaching process, the bleach washing process, and the paper preparation process were fibrous, while sludges from the process cooking with NaOH and the process of final chemical and microbiological treatment were non-fibrous. Sludge solution from the bleaching process had the most amount of solid matters. Sludges from the bleaching process, the bleach washing process, and the final chemical and microbiological treatment process contained about 80-90 %(w/w) moisture. Owing to hypochlorite ion, pH of sludge from the bleaching process was higher than any other sludge samples. The inorganic components of sludges were determined by ICP-AES. The major inorganic component of sludge from the process cooking with NaOH was Na, while the sludge from the bleaching process had Na and Ca, major components in the final chemical and microbiological treatment process were Ca and Al. Trace amount of Mg, Fe, K, P, Mn and Ti were observed in sludges. Sludge from the bleaching process had ashes more than any other sludges. Shape of sludges observed by SEM was appeared to fibrous or crystalline, and the breadth of fibrous sludge was $5{\sim}50{\mu}m$. The sludge from the bleaching process had the most amount of matters soluble by cold and hot water and by alcohol-benzene.

• Applied Chemistry for Engineering
• /
• v.19 no.5
• /
• pp.526-532
• /
• 2008

The proposed $CO_2$ storage technology in the present study is a one-step sequestration process that stabilizes $CO_2$ in a reactor with Serpentine. The advantage of this technology is associated with its high stability of final product so that the entire system is recognized as permanent environment-friendly $CO_2$ removal method. Since the sequestration reaction mechanisms are generally understood that carbonation reaction proceeds with very slow rate, so that pretreatment method to increases reaction rate of $CO_2$ carbonation reaction should be developed. To increase the reactivity of Serpentine with $CO_2$, two different methods of pretreatment are carried out in the present investigation. One is heat-treatment, the other is chemical pretreatment. In this study, only chemical pretreatment is considered leaching method of magnesium from Serpentine using sulfuric acid at the various reaction temperatures, times, and acid concentrations. Experimental results illustrated that pretreatment by sulfuric acid increases surface area of serpentine from $11.1209m^2/g$ to $98.7903m^2/g$ and extracts magnesium compounds. Single variable experiment demonstrated the enhancements of magnesium extraction with increased reaction temperature and time. Amount of magnesium extraction is obtained by using the data of ICP-AES as maximum extraction condition of magnesium is 2 M acid solution, $75^{\circ}C$ and 1hr. After performing chemical pretreatment, carbonation yield increased from 23.24% to 46.30% of weight.

• Analytical Science and Technology
• /
• v.29 no.6
• /
• pp.261-268
• /
• 2016

TXRF is a powerful technique for the soil sample analysis due to its ability to conduct quantitative analysis of powder sample without complicated pre-treatment processes. The conventional internal standard method used for this technique suffers from relatively low accuracy because of varying matrix effects of soil. In order to improve the accuracy, external standard method was applied to analyze two types of soil samples; acid-dissolutionized soil solution and detergent-suspended soil powder. Individual ICP-AES/MS grade standards were mixed, diluted and measured to create standard curves, but applying these curves for analyzing the soil solution sample did not make any improvement in comparison with the internal standard method. On the other hand, standard curves were created with using standard soil powders for the analysis of soil powder samples, and we found that this method increased the accuracy significantly relative to the internal standard method. Especially, Al, Fe, K, Ca, Ti, Ba, Mn, Sr, Rb, Cu was measured with relatively high accuracy (relative error = ${\pm}20%$).

• Journal of the Korean GEO-environmental Society
• /
• v.10 no.6
• /
• pp.61-68
• /
• 2009

The main objective of this study was to examine the removal of heavy metals from water by inflated vermiculites. The component of vermiculites was analyzed by XRF, and the concentration of metal ion was measured by ICP-AES. Serial batch kinetic tests and batch sorption tests were conducted to determine the removal characteristics for heavy metals in aqueous solutions. As a result, solution pH values of tests with the inflated vermiculites generally increased and then stabilized. Equilibrium pHs were generally established within 5 hrs. In addition, removal rates of inflated vermiculites were tested at the initial concentration of 3 mg/L. As a result, at equilibrium concentration, except for chromium (36.23%), Most of the heavy metals were effectively removed (96.08~98.54%). Finally, sorption data were correlated with both Langmuir and Freundlich isotherms. The Qmax obtained from Langmuir isotherm were determined to Pb $725.4mg\;kg^{-1}$, Cd $568.8mg\;kg^{-1}$, Zn $540.2mg\;kg^{-1}$, Cu $457.2mg\;kg^{-1}$ Cr $0.9mg\;kg^{-1}$ respectively. The results of the study indicate that inflated vermiculites can be properly used as an adsorbent for various heavy metals because of its outstanding removal rate.

• Journal of the Korean Geosynthetics Society
• /
• v.19 no.2
• /
• pp.23-33
• /
• 2020

This study determines the basic properties and acid rock drainage generation capacity of Pohang tertiary mudstone through laboratory experiments. According to X-ray fluorescence (XRF) analysis results, the mudstone of this area mostly comprised of SiO₂ with a proportion of approximately 60%, followed in order by Al₂O₃ and Fe₂O₃. As such, it is clear that there is an abundance of aluminosilicates with a high probability of generating acid rock drainage. The XRD analysis showed that the mudstone contains pyrite (FeS₂), it is highly likely to generate acid rock drainage, and inductively coupled plasma atomic emission spectroscopy (ICP-AES) analysis results showed that the mudstone samples contained a high amount of Fe²⁺ ions. As a result of anion analysis measured by ion chromatography (IC), all mudstone samples were measured to have high SO^2-₄ concentrations. According to elemental analysis, the total sulfur (S) content was high, which in turn indicates a high risk of acid rock drainage generation reflected by a maximum potential acidity (MPA) higher than 1%. All in all, although there were slight deviations between the tertiary mudstone samples, overall, the samples exhibited high acid rock drainage generation capacities.

• Journal of the Korean Electrochemical Society
• /
• v.10 no.1
• /
• pp.7-13
• /
• 2007

We synthesized and investigated $La_{0.75}Sr_{0.25}FeO_3$ by Glycine Nitrate Process(GNP) method used as cathode materials for SOFC(solid oxide fuel cell). Optimized amount of glycine is 3.17 mol. ICP elemental composition analysis indicated that the stoichiometry of the synthesized powders have nearly nominal values. SEM images and XRD patterns reveal that the synthesized powder has uniform size distribution and high degree of crystallinity. The sample powders were isostatically pressed to form a pellet. The green body was sintered at $1200^{\circ}C$ and the relative density of the sintered specimens were measured by Archimedes mettled. We measured electrochemical performance of LSF by AC impedance spectroscopy. Resistance of LSF shows lower value than that of LSM throughout all temperature region. The anode-supported solid oxide fuel cell showed a performance of $342mW/cm^2(0.7V,\;488mA/cm^2)$ at $750^{\circ}C$. The electrochemical characteristics of the single cell were examined by at impedance method.