DOI QR코드

DOI QR Code

Synthesis and Characterization of La0.75Sr0.25FeO3 Used as Cathode Materials for Solid Oxide Fuel Cell by GNP Method

GNP법을 이용한 고체산화물 연료전지의 공기극용 La0.75Sr0.25FeO3의 제조 및 특성

  • Park, Ju-Hyun (Advanced Fuel Cell Research Center, Korea Institute of Energy Research) ;
  • Son, Hui-Jeong (Advanced Fuel Cell Research Center, Korea Institute of Energy Research) ;
  • Lim, Tak-Hyoung (Advanced Fuel Cell Research Center, Korea Institute of Energy Research) ;
  • Lee, Seung-Bok (Advanced Fuel Cell Research Center, Korea Institute of Energy Research) ;
  • Yun, Ki-Seok (Advanced Fuel Cell Research Center, Korea Institute of Energy Research) ;
  • Yoon, Soon-Gil (Department of Material Engineering, Chungnam National Univ.) ;
  • Shin, Dong-Ryul (Advanced Fuel Cell Research Center, Korea Institute of Energy Research) ;
  • Song, Rak-Hyun (Advanced Fuel Cell Research Center, Korea Institute of Energy Research)
  • 박주현 (한국에너지기술연구원 신연료전지연구센터) ;
  • 손희정 (한국에너지기술연구원 신연료전지연구센터) ;
  • 임탁형 (한국에너지기술연구원 신연료전지연구센터) ;
  • 이승복 (한국에너지기술연구원 신연료전지연구센터) ;
  • 윤기석 (한국에너지기술연구원 신연료전지연구센터) ;
  • 윤순길 (충남대학교 재료공학과) ;
  • 신동열 (한국에너지기술연구원 신연료전지연구센터) ;
  • 송락현 (한국에너지기술연구원 신연료전지연구센터)
  • Published : 2007.02.28

Abstract

We synthesized and investigated $La_{0.75}Sr_{0.25}FeO_3$ by Glycine Nitrate Process(GNP) method used as cathode materials for SOFC(solid oxide fuel cell). Optimized amount of glycine is 3.17 mol. ICP elemental composition analysis indicated that the stoichiometry of the synthesized powders have nearly nominal values. SEM images and XRD patterns reveal that the synthesized powder has uniform size distribution and high degree of crystallinity. The sample powders were isostatically pressed to form a pellet. The green body was sintered at $1200^{\circ}C$ and the relative density of the sintered specimens were measured by Archimedes mettled. We measured electrochemical performance of LSF by AC impedance spectroscopy. Resistance of LSF shows lower value than that of LSM throughout all temperature region. The anode-supported solid oxide fuel cell showed a performance of $342mW/cm^2(0.7V,\;488mA/cm^2)$ at $750^{\circ}C$. The electrochemical characteristics of the single cell were examined by at impedance method.

Glycine Nitrate Process(GNP)를 이용하여 $La_{0.75}Sr_{0.25}FeO_3$를 합성하였다. 이때, GNP의 글리신의 함량은 화학양론식으로 계산하여 3.17mol을 첨가하였다. ICP-AES분석으로 각각의 조성 함량을 조사하고, XRD, SEM분석으로 합성된 분말의 결정성과 입자크기를 분석하였다. 이렇게 분석한 분말은 일축가압 성형으로 펠렛을 제조하였으며, 이 시편은 $1200^{\circ}C$에서 소결하였다. 소결된 시편은 아르키메데스 법을 이용하여 소결밀도를 측정히였다. 전기화학적 성능을 평가하기 위해 AC impedance spectroscopy로 측정하였으며, GNP 법으로 합성된 LSF가 기존의 LSM 보다 낮은 Ohmic resistance및 Polarization resistance를 보임을 확인하였다. 또한 합성된 LSF를 양극으로 사용하여 연료극 지지체식 고체산화물 연료전지의 단위전지를 제작하였으며, 그 성능은 $750^{\circ}C$에서 $342mW/cm^2(0.7V,\;488mA/cm^2)$을 나타내었다. 마지막으로 임피던스 분석에 의하여 단위전지의 전기화학적 분극저항을 평가하였다.

Keywords

References

  1. M. D. Anderson, J. W. Stevenson, and S. P. Simner, Journal of Power sources, 129, 188-192 (2004) https://doi.org/10.1016/j.jpowsour.2003.11.039
  2. 손희정, 이혜종, 임탁형, 송락현, 백동현, 신동열, 현상훈, John Kilner, '졸-겔법을 이용한 고체산화물연료전지의 전해질 박막 제조 및 가스 투과도', Journal of the Korean Ceramic Society, 42(12), 827 (2005) https://doi.org/10.4191/KCERS.2005.42.12.827
  3. L. A. Chick, L. R. Pederson, G. D. Maupin, J. L. Bates, L. E. Thomas, and G. J. Exarhos, Mater. Lett., 10(1-2), 6 (1990) https://doi.org/10.1016/0167-577X(90)90002-4
  4. Ulrich Schubert, Nicola Husing, 'Synthesis of Inorganic Materials', 181-191, WILEY-VCH, Weinheim (2005)
  5. 김선재, 정충환, 김경호, 김영석, 국일현, 'Self-Sustaining Combustion Process를 이용한NIO/YSZ 초미세 복합분말의 제조' Journal of the Korea Ceramic Society, 33(4), 411-417 (2001)
  6. 구본석, 윤회성, 김병호, 'Glycine-Nitrate Process를 이용한 $La_{0.5}Sr_{0.5}MnO_{3}-Ce_{0.8}Gd_{0.2}O_{1.9}$ 환원극 제조 및 특성평가' Journal of the Korea Ceramic Society Vol. 38, No.1, pp.45-51 2001
  7. S.R. Jain, K.C. Adiga, Combustion and Flame 40 (1981) 71-79 https://doi.org/10.1016/0010-2180(81)90111-5
  8. 유승호, 송근숙, 손희정, 김종희, 송락현, 정두환, 백동현, 신동열, '테입캐스팅을 이용한 대면적 (100$cm^{2}$)연료극 지지체식 평판형 고체산화물 연료전지의 개발', Journal of the Korean Electrochemical Society, 5(1), 41-47 (2003)
  9. 김종희, 송락현, '연료극 지지체식 평관형 고체산화물 연료전지 특성 연구', Journal of the Korean Electrochemical Society, 7(2), 94-99 (2004) https://doi.org/10.5229/JKES.2004.7.2.094
  10. J. S. Kim, S.-I. Pyun, and J. W. Lee, J. Solid State Electr., 11 (2006)
  11. S. Simner, M. Anderson, J. Bonnett, and J. Stevenson, Solid State Ionics, 175, 79-81 (2004) https://doi.org/10.1016/j.ssi.2004.09.016
  12. S. P. Simner, J. P. Shelton, M. D. Anderson, and J. W. Stevenson, Solid State Ionics, 161, 11-18 (2003) https://doi.org/10.1016/S0167-2738(03)00158-9
  13. Andreas Mai, Vincent A.C. Haanapel, Sven Uhlenbruck, Frank Tietz, Detlev Stover, Solid State Ionics, 176, 1341-1350 (2005) https://doi.org/10.1016/j.ssi.2005.03.009
  14. J.M. Ralph, C. Rossignol, R. Kumar, Journal of The Electrochemical Society, 150(11), A1518-A1522 (2003) https://doi.org/10.1149/1.1617300
  15. H. Ullmann, N. Trofimenko, F. Tietz, D. St?ver, A. Ahmad-Khanlou, Solid State Ionics, 138 (2000)
  16. S. P. Simner, J. S. Hardy, J. W. Stevenson, and T. R. Armstrong, Solid State Ionics, 128, 53-63 (2000) https://doi.org/10.1016/S0167-2738(99)00310-0