• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.9
• /
• pp.875-880
• /
• 2011

We design and analyze the cloaking circuit using 2D transmission line structure to make up for the weakness of the established cloaking circuit using only lumped inductor and capacitor elements. The 2D transmission line structure enables one to conveniently design the cloaking circuit with available element values. All the necessary analysis and synthesis(design) formulas have been derived. A cloaking circuit for a cylindrical scatterer in free space has been designed based on the provided design formulas and its effects have been investigated using the circuit simulator ADS. The effect of the cloaking medium for this specific case has been observed to be about 10.5 dB.

• International Journal of Precision Engineering and Manufacturing
• /
• v.2 no.4
• /
• pp.5-11
• /
• 2001

Vibration and noise of gears is doc to the transmission error and the vibration exciting force caused by the periodically alternating tooth stiffness. Transmission error is the rotation delay between driving and driven gear caused by manufacturing error, alignment error in assembly and so on. Tooth stiffness changes with the proceeding mesh of teeth. The purpose of this study is to develop how to calculate simultaneously the optimum amounts of tooth profile modification. end relief and crowning by minimizing the vibration exciting force of helical gears. We estimate the vibration exciting force by the meshing analysis of gears. Formulated constraints of this problem consist of contact ratio and strengths of gear teeth such as tooth bending strength, surface durability, and scoring. ADS(Automated Design Synthesis) is used as an optimization tool. We also investigate the relation between the aspect ratio and the optimum values of tooth modification. The proposed method can calculate the optimum amount of tooth modification automatically and is expected to be practically useful to resolve the problem of vibration of helical gears.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.12
• /
• pp.2189-2195
• /
• 2007

In this paper, we propose a newly developed selective reset waveform of a ac PDP using the wide erase pulse technique with the control of address bias voltage. Although it is generally understood that the wide pulse erasing methode shows the narrow driving margin in an opposite discharge type ac PDP, we could obtain a moderate driving margin in a 3-electrode surface discharge type ac PDP. The obtained driving margin shows a strong dependency on the sustain voltage and the address bias voltage. The lower the sustain and the address bias voltage, the wider the driving margin. The pulse width of the proposed waveform is only $10{\mu}s$, which gives additional time to the sustain period, hence increases the brightness. The brightness and contrast ratio increase about 20% together comparing to the conventional ramp type selective reset waveform with the driving scheme of 10 subfield ADS method. The driving margin was measured with the line by line addressed pattern on the white test panel of 2inch diagonal size and the discharge gas was Ne+Xe4%, 400torr.

• Archives of design research
• /
• v.16 no.1
• /
• pp.83-92
• /
• 2003

Recently 3D animation can produce animation dose to real picture owing to rapid technical development of hardware and software and is used as entertainment factors for movie, ads, game and digital pictures. The process of making 3D animation needs the various making techniques and expression factors unlike traditional animation. Production technique and expression factors in making 3D animation are not acted as individual factor, but they can achieve an animation with high perfection when they should be combined. Therefore this study analyzes the technical expression methods based on hardware and software for operation by computer process and the artistic expression factors based on aesthetic, figurative, design and pictorial factors and then seeks a method of making animation with technical perfection.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.6
• /
• pp.533-539
• /
• 2004

In this work, in order to realize a band pass filter with wide-band characteristics for mobile communications, 2 GHz band pass filter was designed using ring resonator with stub. The three stage wide-band BPF was designed and fabricated. For broadband design, the ring circumference was divided by 4 sections with 1/8 wavelength and 2 sections with 1/4 wavelength which have different line impedances. The characteristics of the proposed BPF were highly improved by using three stage ring resonator. The characteristic impedance values of each sections were obtained by Powell's least square algorithm where differentiations are not needed. The measured results showed a good agreement with the theoretical results as well as ADS simulation.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1998.04a
• /
• pp.262-271
• /
• 1998

Recent, more and more steel deck bridges are adopted for the design of long span bridges and the upgrading of existing concrete deck bridges, mainly because of reduced self weight, higher stiffness and efficient erection compared to concrete decks. The main objective of this study is to propose on formulation of the design optimizations to develop an optimal desist program required for optimum desist for orthotropic steel-deck bridges. The objective function of the optimization is formulated as a minimum initial cost design problem. The behavior and design constraints are formulated based on the ASD and LRFD criteria of the Korean Bridge Design Code(1996). The optimum design program developed in this study consists of two steps. In the first step the system optimization of the steel box girder bridges is carried out. And in the second step the program provided the optimum design of the orthotropic steel-deck with close ribs. In the optimal design program the analysis module for the deck optimization is based on the Pelican Esslinger method. The optimizer module of the program utilizes the ADS(Automated Desist Synthesis) routines using the optimization techniques fuor constrained optimization. From the results of real application examples, The cost effectiveness of optimum orthotropic steel-deck bridges designs based on both ASD and LRFD methods is investigated by comparing the results with those of conventional designs, and it may be concluded that the design developed in this study seems efficient and robust for the optimization of orthotropic steel-deck bridges

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.38 no.6
• /
• pp.82-92
• /
• 2001

This paper describes implementation of an embedded 32-Bit RISC core for portable communication/information equipment, such as cellular phones, PDA(Personal Digital Assistants), notebook, etc. The RISC core implements the ARM$\circled$V 4 instruction set, operates with typical 5-stage pipeline. It supports Thumb code to improve the code density, and uses the dynamic power management method of pipeline registers. It was modeled and simulated in RTL level using VHDL, and verified with ARMulator of ADS (Arm Developer Suite) and had average CPI of 1.44. The core is synthesized automatically using the cell library based on $0.6{\mu}m$ CMOS 1-poly 3-metal CMOS technology. It consists of about 41,000 gates and the clock frequency is expected to be above 45 MHz.

• Journal of Satellite, Information and Communications
• /
• v.6 no.2
• /
• pp.91-96
• /
• 2011

In this paper, we present measurement method of the unknown load impedance. Load impedance is continuously varied by external environment conditions. This arbitrarily varied load impedance can be calculated using 3-point voltage measurement on ${\lambda}/4$ sectioned transmission line. We derived several numerical formulas from 3-point voltage measurement results and drew load impedance selection algorithm from calculated load impedance results. These numerical formulas and load impedance selection algorithm are verified by ADS simulation. Simulation results showed that arbitrary load impedance can be correctly measured using above mentioned formulas and selection algorithm.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.11
• /
• pp.199-205
• /
• 2000

The vibration and noise of gears is due to the vibration exciting force caused by the tooth stiffness which changes periodically as the mesh of teeth proceeds and by the transmission error, that is, the rotation delay between driving gear and driven gear caused by manufacturing error and alignment error in assembly and so on. The purpose of this study is to develop how to calculate simultaneously the optimum amounts of tooth profile modification, end relief and crowning by minimizing the vibration exciting force of helical gears. We estimate the vibration exciting force by the mesh analysis of gears. The constraints of this problem consist of contact ratio and strengths of gear teeth such as tooth fillet stress, surface durability and scoring. ADS(Automated Design Synthesis) is used as an optimization tool. And, since the aspect ratio is an important parameter of tooth modification, we investigate the relation between it and the optimum values of tooth modification. The proposed method can calculate the optimum amount of tooth modification automatically and is to be utilized to resolve the problem of vibration of helical gears.

• Korean Journal of Biological Psychiatry
• /
• v.13 no.2
• /
• pp.70-81
• /
• 2006

Objective : The purpose of this study was to investigate the differences of the cognitive performance, emotional and behavioral problems among the attention-deficit/hyperactivity disorder(ADHD) groups that show the difference between visual and auditory attention. Method : Using 'ADHD Diagnostic System(ADS)', visual attention and auditory attention of 98 children diagnosed as ADHD were measured. According to the omission and commission error of ADS, they were divided into three groups ; 1) the group whose each visual omission and commission error scores were higher than each auditory omission and commission error scores(VV group), 2) the group whose each auditory omission and commission error scores were higher than each visual omission and commission error scores(AA group), 3) the group that was the rest of VV and AA group(M group). And the results of both the subscales of Korean Educational Development Institute-Wechsler Intelligence Scale for Children(KEDI-WISC) and the subscales of Korean Child Behavior Checklist(K-CBCL) among three groups were compared. Finally, the correlation between the visual omission, visual commission, auditory omission, auditory commission error and the results of KEDI-WISC, K-CBCL were investigated. Results : The results were as follows ; 1) In 98 ADHD children, the number of VV group(N=56) was higher than that of AA (N=10) and M group (N=32). 2) All mean scores of the subscales of KEDI-WISC of VV group were higher than those of M and AA group. The score of verbal IQ(p=.039) of VV group was significantly higher than that of AA group and the scores of block design(p=.015), Kaufman's factor 2(p=.045), performance IQ(p=.004) were significantly higher than those of M group. The score of full IQ(p=.004) were significantly higher than that of M and AA group. 3) The mean scores of all K-CBCL subscales of VV group were higher than those of M and AA group, except the score of Somatic complaint subscale. The score of Social subscale(p=.041) of VV group was significantly higher than that of AA group. The score of Withdrawn subscale(p=.021) of AA group was significantly higher than that of VV group. 4) There were no significant correlation between the scores of visual omission/commission error and those of each subscale of KEDI-WISC. But, there were many significant correlations between the scores of auditory omission/commission error and those of each subscale of KEDI-WISC. 5) There were significant correlation between the score of the visual omission error and that of Thought problem subscale(r=.205, p=.043) of K-CBCL. There were significant correlation between the scores of the auditory omission error and those of Social subscale(r=-.319, p=.001), Social problems subscale(r=.206, p=.042), Thought problem subscale(r=.235, p=.021). Finally, there were significant correlation between the scores of auditory commission error and those of Social subscale(r=-.241, p=.017), Thought problem subscale(r=.235, p=.020). Conclusion : The ADHD children whose auditory attention ability were higher than visual attention ability had relatively better cognitive performance and less emotional/behavioral problems than the others. The more comprehensive experiment will be needed about the cognitive performance, emotion and behavior problems of the ADHD children showing the difference between visual and auditory attention.