• Journal of Korean Institute of Industrial Engineers
• /
• v.33 no.3
• /
• pp.381-392
• /
• 2007

In this paper, we present an analytical method for estimating the saturation throughput of an 802.11 ad hoc LAN in the presence of noise distorting transmitted frames. This is the first method that allows studying analytically the 802.11 network performance with consideration of correlated channel failures usually inherent to realistic wireless channels. With the study, we consider the possible packet fragmentation that can be adopted to reduce the performance degradation caused by noise-induced distortions. In addition to the throughput, our method allows estimating the probability of a packet rejection occurring when the number of packet transmission retries attains its limit. The obtained numerical results of investigating 802.11 LANs by the developed method are validated by simulation and show high estimation accuracy as well as the method efficiency in determining the optimal fragmentation threshold.

• International Journal of Aeronautical and Space Sciences
• /
• v.1 no.1
• /
• pp.70-80
• /
• 2000

The attitude knowledge error model is formulated for specifically KOMPSAT attitude determination system using the Lefferts/Markley/Shuster method, and the attitude determination(AD) error analysis is performed so as to investgate the on-board attitude determination capability of KOrea Multi-Purpose SATellite(KOMPSAT) using the covariance analysis method. Analysis results show there is almost no initial value effect on Attitude Determination (AD) error and the sensor noise effects on AD error are drastically decreased as is predicted because of the inherent characteristic of Kalman filter structure. However, it shows that the earth radiance effect of IR-sensor(earth sensor) and the bias effects of both IR-sensor and fine sun sensor are the dominant factors degrading AD error and gyro rate bias estimate error in AD system. Analysis results show that the attitude determination errors of roll, pitch and yaw axes are 0.056, 0.092 and 0.093 degrees, respectively. These numbers are smaller than the required values for the normal mission of KOMPSAT. Also, the selected on-orbit data of KOMPSAT is presented to demonstrate the designed AD system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.4A
• /
• pp.315-321
• /
• 2010

In Ad-hoc networks, centralized power control is not suitable due to the absence of base stations, which perform the power control operation in the network to optimize the system performance. Therefore, each node should perform power control algorithm distributedly instead of the centralized one. The conventional distributed power control algorithm does not consider the adaptive bit loading operation to change the MCS (modulation and coding scheme) according to the received SINR (signal to interference and noise ratio), which limits the system throughput. In this paper, we propose a novel distributed bit loading and power control algorithm, which considers the adaptive bit loading operation to increase total system throughput and decrease outage probability. Simulation results show that the proposed algorithm performs much better than the conventional algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.5B
• /
• pp.327-337
• /
• 2012

There have been lots of researches on the optimal relay selection in relay-based systems. However, most researches have been focused on the maximization of transmission capacity with a constraint of sum power at both transmitter and relays. In Ad-hoc networks where relays have batteries of limited power, it is imperative to minimize the energy consumption while maintaining the required quality-of-service (QoS). In this paper, we propose an optimal relay selection strategy to minimize the relay power consumption while satisfying the required signal-to-noise ratio (SNR). Through intensive simulations, we show the proposed method is more effective in terms of energy consumption and guarantee lower transmission failure probability in multi-hop Ad-hoc environments.

• Journal of Satellite, Information and Communications
• /
• v.6 no.1
• /
• pp.75-79
• /
• 2011

Wireless devices can communicate between each other without existing infrastructure in mobile Ad-hod network. Ad hoc networks can be used under difficult conditions, where it is difficult to construct infrastructures, such as shadowing areas, disaster areas, war area, and so on. In order to support to considerable and various wireless services, more spectrum resources are needed. However, efficient utilization of the frequency resource is difficult because of spectrum scarcity and the conventional frequency regulation. Ad-hoc networks employing cognitive radio (CR) system that guarantee high spectrum utilization provide effective way to increase the network capacity. In this paper, we simulate and compare the performance of conventional single and cooperative spectrum sensing with CR system using ad-hoc networks in additive white Gaussian noise (AWGN) and Rayleigh channel model. And we demonstrate performance improvement by analyzing the system performance.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.07a
• /
• pp.286-288
• /
• 2005

최근 기지국(Base Station)의 도움 없이 이동 단말기 간의 다중 무선 홉을 사용하여 송,수신자 간의 데이터 전송을 가능하게 하는 Ad-hoc 통신망에 관한 연구가 활발히 진행되고 있다. 유선망과 달리 Ad-hoc 통신망은 무선 전송 매체를 사용하기 때문에 신호의 페이딩(Fading), 간섭(Interference), 잡음(Noise) 등에 의해 높은 BER(Bit Error Rate)이 발생하는 특징을 가지고 있다. 하지만, 현재 인터넷 상에서 광범위하게 사용되고 있는 전송 규약인 TCP(Transmission Control Protocol)는 유선망의 신뢰적인 전송 매체를 고려하여 개발된 프로토콜이기 때문에 TCP를 수정 없이 Ad-hoc 통신망에 적용할 경우 전송 성능이 저하되는 문제를 가지고 있다. 전송 성능이 저하되는 문제는 기존 TCP가 에러 발생의 원인을 혼잡에 의한 것으로 인식하고 불필요한 혼잡 제어를 하기 때문이다. 본 논문에서는 송신자가 에러 발생 원인을 구별하고, 그에 따라 전송률을 조절함으로써 Ad-hoc 망에서의 TCP성능 향상을 위한 방법을 제시하였다. 또한 ns-2 시뮬레이터를 이용한 실험을 통해 TCP의 성능이 제안된 알고리즘에 의해 향상되었음을 확인하였다

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.176-179
• /
• 2005

To control the vibration transmitted to the precision instruments from ground has always been of great interest among the researchers. This paper proposes a single axis vibration isolation system which can be used as a module far a table top six axis isolator for highly precise measurement and actuation system. The combined active-passive isolation principle is used for vertical vibration isolation by mounting the instrument on a passively damped isolation system made of Elastomer along with the active stage in series which consists of very stiff piezo actuator. The active stage works in combination with the passive stage for working as a very low frequency vibration attenuator. The active stage is isolated from the payload disturbance through the Passive stage and thus modularity in control is achieved. This made the control algorithm much easier as it does not need to be tuned to specific payload.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.10a
• /
• pp.672-672
• /
• 2011

This study describes the comparison of noise suppression performances at different locations of two error microphones in active noise control (ANC) for outdoor applications. For this study, 12 different locations were predefined to decide best locations for error sensors in terms of suppressing noise. As shown in Fig. 1, the ANC system with one primary loudspeaker, two secondary loudspeakers and two error microphones is operated by a filtered-x LMS (FXLMS) algorithm which is implemented in a TI 6713 DSP board and Realsys 4713 AD/DA Extension board. The noise for the primary source is a typical road noise measured at a highway roadside. The lengths of adaptive filters of W1 and W2 are varied from 32 to 128 respectively. An intensive computer simulation was accomplished before outdoor ANC experiments. It is expected from the simulation results that the ANC performances are very much dependent upon the locations of the two error microphones.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.5
• /
• pp.632-639
• /
• 2012

Ad-hoc networks can be used various environment, which it is difficult to construct infrastructures, such as shadowing areas, disaster areas, war area, and so on. In order to support to considerable and various wireless services, more spectrum resources are needed. However, efficient utilization of the frequency resource is difficult because of spectrum scarcity and the conventional frequency regulation. Ad-hoc networks employing cognitive radio(CR) system that guarantee high spectrum utilization provide effective way to increase the network capacity. In conventional CR based ad-hoc network, it uses constant threshold value to detect primary user signal, so the results become not reliable. In this paper, to solve this problem, we apply adaptive threshold value to the CR based ad-hoc network, and adaptive threshold is immediately changed by SNR(Signal to Noise Ratio). From the simulation results, we confirmed that proposed algorithm has the greatly better detection probabilities than conventional CR based ad-hoc network.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.30 no.5
• /
• pp.871-879
• /
• 2020

Perceptual Ad-Blocking is a new advertising blocking technique that detects online advertising by using an artificial intelligence-based advertising image classification model. A recent study has shown that these Perceptual Ad-Blocking models are vulnerable to adversarial attacks using adversarial examples to add noise to images that cause them to be misclassified. In this paper, we prove that existing perceptual Ad-Blocking technique has a weakness for several adversarial example and that Defense-GAN and MagNet who performed well for MNIST dataset and CIFAR-10 dataset are good to advertising dataset. Through this, using Defense-GAN and MagNet techniques, it presents a robust new advertising image classification model for adversarial attacks. According to the results of experiments using various existing adversarial attack techniques, the techniques proposed in this paper were able to secure the accuracy and performance through the robust image classification techniques, and furthermore, they were able to defend a certain level against white-box attacks by attackers who knew the details of defense techniques.