• Journal of the Korean Wood Science and Technology
• /
• v.43 no.5
• /
• pp.641-651
• /
• 2015

The aim of this study was to estimate the service life of alkaline copper quaternary (ACQ)-treated wood. The service life of preservative-treated wood was estimated by comparing a residual quantity of ACQ in wood with toxic threshold to fungi. Indoor and outdoor leaching tests were carried out in order to predict residual ACQ quantity within wood. As a result, the leaching ratio of ACQ from treated wood above ground via precipitation was 18.1% for 50 years. When the H4 treated wood, which is traditionally used in contact with the ground and fresh water, is used above-ground, the leaching ratio of ACQ for 50 years is 18.1% and the residual quantity of ACQ is $4.2kg/m^3$, which is higher than the toxic threshold of ACQ. Thus, the H4 treated wood used above-ground will be resistant to biodeterioration for at least 50 years.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.3
• /
• pp.253-259
• /
• 2018

To determine the depth of preservative penetration in ACQ treated wood, the degree of penetration of Cu was measured. In this study, we developed a DDAC coloring method to investigate the penetration depth of DDAC, which is one of the active ingredient of ACQ, into wood. The following conclusions were obtained. The DDAC component reacts with a 2', 7'-dichlorofluorescein indicator and results in a deep orange color. This orange coloring reaction appears not only in DDAC solutions but also in ACQ treated wood tissues in which DDAC is present. It is possible to visually verify that DDAC has better wood penetration than Cu in the spruce, which is an refractory wood species, by the DDAC coloring method developed this study. In addition to the results, it is necessary to investigate the difference in penetration of Cu and DDAC for other wood species with poor preservative penetration.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.165-168
• /
• 2003

이동전화 번호이동성 구현을 위한 망기능 규격은 ACQ 방식으로 이동전화 번호이동성 (Mobile Number Portability, MNP)을 2G 이동전화 상호간에 제공하기 위한 망의 기능구조 및 정보흐름을 규정한다. 본 논문에서는 번호이동성 요구사항에 따라, 소요되는 망기능 및 시스템 기능을 정의하고, 이들 기능간에 주고받는 정보를 규정한다. 본 논문은 번호이동성에 따른 SMS(Short Message Service)의 처리방법 또한 규정한다.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.3 s.131
• /
• pp.53-63
• /
• 2005

This study attempted to obtain the basic data of utilizable possibility of preservative treated wood as a material used in a marine ranch. To evaluate the leaching stability of CCA-, CCFZ-, and ACQ-treated woods in seawater, the specimens treated with 2% and 3% (w/v) of CCA, CCFZ, and ACQ were exposed to deionized water, synthetic seawater and natural seawater for 41 days and then each component released was periodically determined. There was little amount of copper and chromium released from CCA-treated wood exposed in both deionized and seawater. Although relatively large amount of arsenic was released from CCA-treated wood, the release rate in seawater was lower than that in deionized water. The release rate of chromium and zinc from CCFZ-treated wood were somewhat greater in deionized water, but lower in seawater than in deionized water. Retention level and salinity of synthetic seawater had little effect on the release rate of components. The ACQ-treated wood had greater copper release than CCA- and CCFZ-treated wood, and the amount of copper released did not affected by leaching media used.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2004.11a
• /
• pp.274-274
• /
• 2004

• Journal of Advanced Navigation Technology
• /
• v.11 no.2
• /
• pp.163-169
• /
• 2007

In this paper, we propose a method of trigger pulse generation to capture the image on time by making a synchronization between the x-ray generator and digital x-ray image acquisition system. we designed a wireless trigger pulse generation circuit to make a synchronization between x-ray generator and digital image acquisition system and analysis its performance. When it starts to detect a certain level of x-ray radiation or above from the air, this method starts to generate a ACQ_START signal to indicate the timing for image acquisition starting from digital image acquisition system. Hence, when it starts to detect under certain level of x-ray signal from the air, this method starts to generate a ACC_END signal to indicate the timing for image acquisition stop from digital image acquisition system. Image acquisition is activated only this time between ACQ_START and ACQ_END signal. By doing this wireless detecting of x-ray signal from remote, we can get more accurate timing for capturing the x-ray image and any type of x-ray generator can be connected to digital image acquisition system, regards of wired protocol. This makes easy installation. We could get 3.5 line pair / mm resolution at 20 mAs of x-ray level with resolution chart. This is same or better image comparing to conventional wired result.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.6
• /
• pp.481-489
• /
• 2011

This study was conducted to evaluate the pressure treatment characteristics of Japanese red pine and Japanese larch skin timber with ACQ-2, CUAZ-2 and CuHDO-1. The effect of moisture content (MC) on preservative treatability was investigated for Japanese red pine sapwood and Japanese larch heartwood, and fixation characteristics of CCA alternatives was also evaluated. Japanese red pine sapwood, which was dried below 30 percent MC, was fully penetrated with preservatives, and minimum requirement of preservative retention for the hazard class H3 was achieved. Through measuring preservative retention gradient in Japanese red pine sapwood, it was confirmed that the retention gradient of CuHDO-1 was steeper than that of both ACQ-2 and CUAZ-2. In particular, it was intensified at a higher MCs of wood samples (25∼30%). Japanese larch heartwood did not meet the minimum requirement of penetration and retention for the hazard class H3 over the range of pretreatment MCs tested. With presteaming under $121^{\circ}C$ for 12 hours, the treatability of Japanese larch heartwood was enhanced to meet the minimum requirement for the hazard class H3. The fixation rate of copper was much more faster under drying condition compared with nondrying condition; more than 95% of copper were fixed in 3~6 days and 1 day under drying conditions in Japanese red pine sapwood and Japanese larch heartwood, respectively. After 3-week fixation period at ambient temperature, the amount of mobile copper in treated wood sample that remains available for leaching from treated wood was the highest in the wood samples treated with ACQ-2, followed by CuHDO-1 and CUAZ-2. It was proportional to the amount of copper in treating solution.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.6
• /
• pp.576-582
• /
• 2013

To obtain the basic information on wood preservative process using copper, the penetration ACQ-2 preservative agent into Douglas fir wood and its degradational characteristics were investigated. Douglas fir is known to be difficult for preservative agent injection. To find the hindrance factor of the preservatives movement, the ray height, ray density, and length of tracheid were measured and observed by a stereoscopic microscope and scanning electron microscope. The results were compared in the well-penetrated parts of preservatives and insufficient parts. There were no significant differences in height, length, and density between both parts, except for the pits of the wood elements observed in SEM micrograph. More declosed pits were found in the well-penetrated parts of preservatives. Decay characteristics of wood specimen treated with various ACQ concentrations by brown-rot fungi was observed by an optical microscope. The decayed properties of tracheid, rays, and resin canals was found in the non-treated wood specimens and it was also found that some extent of preservatives concentration is necessary to protect the decay.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.4
• /
• pp.504-510
• /
• 2015

This research was performed to evaluate soil contamination caused by copper depleted from ACQ-treated wood. Three years after the exposure of ACQ-treated wood in the field test sites, soil samples around the treated wood were collected and analyzed for the copper amount and distribution through soil. Soils around the deck posts installed in five different neighborhood parks located in Chonnam and Gyeongnam were investigated for copper contents. The results of the field test showed that the amount of copper leached from the end surface of treated wood buried under soil was more than 1.5 times the copper amount leached from the lateral surfaces, and the mobility of copper was very restricted in soil. The copper contents of soil within 10 cm from the treated deck posts installed in the parks showed to be less than 500 mg/kg, which are the limit values of the 2nd region set up by enforcement regulation of soil environment conservation act. The distribution ranges of copper in soil from the treated wood set up in the field test sites seemed to be much wider than those from deck posts, which may explained by the fact that the retentions of the treated samples used in the field test sites were much higher than those of the deck posts.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.2
• /
• pp.265-273
• /
• 2015

In general, when wood products are used outdoors for a certain period of time the surface color of wood changes due to light, water, heat and so on. This color change can be considered importantly for the product's market value. In this study, the color change of ACQ (Alkaline Copper Quaternary) and CBHDO (CuO $H_3BO_3$ N-cyclohexyldiazenium-anion) treated wood and untreated wood was investigated during 2-year weathering test. From this experimental study, it was found that the colors of the treated wood changed more reddish and yellowish from green. Meanwhile, the untreated wood turned to grey color rapidly. Also, the color of the treated wood in short-term exposure changed closer to the inherent color of the fresh natural wood than that of the untreated woods.