• 대한본초학회지
• /
• 제26권1호
• /
• pp.13-19
• /
• 2011

Objective : This study was to compare antioxidant activity and HPLC pattern analysis from 4 species of changpo(ch$\={a}$ngp$\'{u}$). Methods : To compare the antioxidant activity and HPLC pattern analysis from the 4 species of changpo, we performed the in vitro anti-oxidative activity assays and HPLC analysis from 70% ethanol extracts of Acorus gramineus Sol. (=AG), A. tatarinowii Schott (=AT), A. calamus L. (=AC) and Anemone altaica Fisch. ex C.A.Mey (=AA) taken in the herbal medicine market of Korea. Results : AG has the most effective anti-oxidative activity among 4 species of changpo. As the HPLC pattern analysis, AT was detected the unknown peak at retention time 14.9 min whereas AG was not showed any peak at the same retention time. These results suggest that AG could be used rather than AT when it need to be prescribed as anti-oxidative medicine. Conclusions : This result can be used as the basic data contributing to the stability of AG according to an appropriate clinical application.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.169.1-169.1
• /
• 2013

산업 및 기술의 발전에 의해 많은 신소재들이 개발되고 있다. 그 중에서 SiC는 고온재료, LED, 반도체 등의 우주선 표면재료, 핵융합로 구조재료, 고온 씰, 히터 등 여러 산업분야에서 관심을 가지면서 다양한 가스를 이용한 합성법이 개발되어 있다. 최근에는 분말의 형태 및 크기를 용도에 맞게 개발해서 사용하고 있는 상황이다. 그런데 각 합성법에 따른 합성원리에 대해서는 여러 가지 주장이 있다. 그 중에서 몇 가지 합성법에 대해서 고찰하고 합성의 원리를 추론한다. 그리고 그 중의 한 가지인 CH3SiCl3 가스를 이용한 SiC 나노분말 합성과 SiC의 결정성장 과정에서 나타나는 whisker의 형성을 확인했다. 정교한 SiC 분말합성은 일반적으로 sol-gel, 플라즈마(DC, AC 및 ICP 등) 등을 이용한 방법이 개발되어 있다. 이와 같이 정교한 SiC 나노분말 등은 실리콘 유기 화합물 중합체(trichloromethylsilane, polycarbosilane 등)의 열분해를 통해 합성 할 수 있으며, 열분해 는 약 1,000{\sim}1,500^{\circ}C의 온도 영역에서 일어난다. 이 과정에서 고분자의 열분해 및 재결합 이 동반되고 부산물로서 HCl, CH4 등의 유해가스를 같이 생성한다. 합성된 SiC 나노분말은 전형적인 ${\beta}-SiC$로 XRD의 관찰결과 (111), (220), (311)의 방향성을 갖는 것을 확인했으며 평균입자의 크기는 약 30 nm 정도다.

• 환경위생공학
• /
• 제12권1호
• /
• pp.15-23
• /
• 1997

The anionic exchange resins with the Dowex-1 and Amberlite CG-400 form were transformed into resin of sulfate and acetate acid form, respectively. The uranyl complex ions with SO$_{4}$$^{2-}$ and CH$_{3}$COO$^{-}$ were adsorbed on the anion exchange resion mentioned above, and these complex ions were eluted as mixture eluents of 0.7M HNO$_{3}$ - 0.5M NH$_{4}$NO$_{3}$ by anion exchange chromatography. The optimum adsorption conditions of uranyl anion complex ions adsorbed on the upper of the resin colmun were 1.5-2.0 ml/min of flow rates at pH 2.0 and adsorptive power of uranyl complex ion of sulfuric acid type were nearly consistent with the Caussion normal distribution curve, whereas the elution state of UO$_{2}$(Ac)$_{2}$$^{4-}$ with acetic acid type was departed. The weighing form obtained from resin of sulfuric acid and aceric acid type was U$_{3}$O$_{8}$ whose recovery was 91.7%. The possibility of recovering uranium from the monazite sulfate solution using a strong base anion resin, Amberlite CG-400(sulfate form), was successfully recovered more than 90%.

• Bulletin of the Korean Chemical Society
• /
• 제26권7호
• /
• pp.1065-1070
• /
• 2005

$[Mn_{12}O_{12}(O_2CPh-4-SMe)_{16}(H_2O)_4]{\cdot}7CH_2Cl_2$ (1), a new single-molecule magnet complex has been successfully synthesized by substitution of acetate ligand of Mn12ac with 4-(methylthio)benzoic acid. Complex 1 crystallizes into triclinic P$\overline{1}$ with a = 18.321(3) $\AA$, b = 19.011(3) $\AA$, c = 27.230(4) $\AA$, $\alpha$ = 86.973(3)$^{\circ}$, $\beta$ = 76.919(3)$^{\circ}$, $\gamma$ = 87.613(3)$^{\circ}$, and Z = 2. In complex 1, one Mn(III) ion has an abnormal Jahn-Teller elongation axis oriented at an oxide ion. Complex 1 has two out-of-phase ac susceptibility peaks in the 2-4 K and 4-7 K regions. Effective anisotropy energy barrier and pre-exponential factor are $U_{eff}$ = 45.95 K, 1/$\tau$0 = 8.6 ${\times}\;10^9s^{-1}\;for\;{\chi}_M$'' peaks in the lower temperature region and $U_{eff}$ = 59.45 K, 1/$\tau_0$ = 2.2 ${\times}\;10^8\;s^{-1}$ for $\chi_M$'' peaks in the higher temperature region. The parameters of S = 10, g = 1.87, D = -0.40 $cm^{-1}$, and E = 0.00034 $cm^{-1}$ were obtained from the M/N${\mu}_B$ vs. H/T plot of complex 1.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2006년도 제33회 KOSCO SYMPOSIUM 논문집
• /
• pp.266-271
• /
• 2006

Characteristic of partial oxidation of methane using arc-jet plasma by AC power is investigated. Arc-jet reactor used in this work is slightly modified from typical arc jet reactor so that it can make and sustain stable state of plasma. Methane conversion, selectivity of chemicals such as hydrogen and hydrocarbon materials in the product are analyzed. Parametric approach on the performance of the reactor or detail on the partial oxidation process is carried with $O_2/C$ ratio as parameter. In addition to the results, SED and arc length is changed to understand the effect of current-voltage correlation on the reforming performance and relative role of thermal process.

• 동의생리병리학회지
• /
• 제25권4호
• /
• pp.691-696
• /
• 2011

In order to the neuroprotective effect of electroacupuncture (EA), the present study examined the effects of electroacupuncture inacupoint ST36 (Stomach 36) on trimethyltin chloride (TMT)-induced cognitive impairments rat using the Morris water maze (MWM) task and immunohistochemistry staining. The rats were randomly divided into the following groups: naive rat (Normal), TMT injection rat (Control), TMT injection + EA treated rat inacupoint ST36 (ST36) and TMT injection + EA treated rat in non-acupoint, base of tail (Non-AC). Electroacupuncture (2Hz, 2mA, and 10 minutes)was applied either to the acupuncture point ST36 or the nonacupuncture point in the tail for the last 14 days. In the water maze test, the animals were trained to find a platform in a fixed position during 4d and then received 60s probe trial on the $5^{th}$ day following removal of platform from the pool. Rats with TMT injection showed impaired learning and memory of the tasks and treatment with EA in acupoint ST36 (P<0.05) produced a significant improvement in escape latency to find the platform after $2^{nd}$ day and retention trial in the Morris water maze. Consistent with behavioral data, treatment with EA in acupoint ST36 also significantly increased expression of Choline acetyltransferase (ChAT) and Acetylcholinesterase (AChE) immunoreactive neurons in the hippocampus compared to the Control group. These results demonstrated that EA in acupoint ST36 has a protective effect against TMT-induced neuronal and cognitive impairments. The present study suggests that EA in acupoint ST36 might be useful in the treatment of TMT-induced learning and memory deficit.

• Journal of Pharmaceutical Investigation
• /
• 제38권1호
• /
• pp.57-61
• /
• 2008

A HPLC-ELSD method was developed to determine saikosaponin derivatives from Bupleuri Radix. Eight saikosaponins, saikosaponin c, i, h, a, $b_2$, g, $b_1$ and d, were analyzed under optimized HPLC conditions [column: Eclipse XDB $C_{18}$ ($150{\times}4.6mm$ i.d., $5{\mu}m$; mobile phase: $H_2O$ with 0.1% $CH_3$COOH (v/v) for solvent A and AcCN with 0.1% $CH_3$COOH (v/v) for solvent B, gradient elution; flow rate: 1mL/min; injection volume: $20{\mu}L$]. Good linearity was achieved in the range from 62.5 to $250{\mu}g/mL$ for each compound, and intra-day precision and accuracy at each concentration level varied between 0.05 and 5.45% and between 93.9 and 109.6%, respectively, whereas those for inter-day variations were between 0.91 to 2.73% and 94.3 to 106.1%. This HPLC-ELSD method was applied for the determination of sakosaponins from Bupleuri Radix samples, and saikosaponin a $(0.79{\pm}0.20mg/g)$, c $(0.33{\pm}0.06mg/g)$ and d $(0.48{\pm}0.15mg/g)$ were observed as major compounds. The other saikosaponins were shown under limit of quantification level thus couldn't be quantified. The present study suggested that the introduced HPLC-ELSD method is selective and reliable, and not only saikosaponin a, but also saikosaponin c and d should be employed as the standard markers for Bupleuri Radix.

• 한국대기환경학회지
• /
• 제30권5호
• /
• pp.492-503
• /
• 2014

In this study, emission characteristics of volatile odorant species released from urine samples were investigated in relation to two key variables: [1] storage conditions before sampling and [2] incubation conditions during sampling. To this end, 20 offensive odorants were quantified by four different analytical systems and then sorted according to seven functional groups. It is indicated that benzene (B), styrene (S), isobutyl alcohol (i-BuAl), butyl acetate (BuAc), butyraldehyde (BA), isovaleraldehyde (IA), and valeraldehyde (VA) did not contribute to urine odor because their concentration levels were measured below detection limits in all samples. On the other hand, emission concentrations of toluene (T), methyl ethyl ketone (MEK), methyl mercaptan ($CH_3SH$), carbon disulfide ($CS_2$), and ammonia ($NH_3$) were generally higher than other compounds. In terms of odor intensity (OI), $CH_3SH$ and $NH_3$ showed the largest OI values in the range of 2~4. According to t-test (storage approach and urine temperature), the results of T, $CS_2$, and $NH_3$ were statistically distinguished from each other in terms of differences in sampling temperature. Likewise, the emissions of certain odorants from urine samples were affected by changes in sample treatment conditions to a degree.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.363-369
• /
• 2001

By alternating $Al_{18}B_4O_{33}$/AC4CH composites with Al1050 sheets and then hot pressing, MMC/Al laminate composites have been successfully fabricated as parameters of the laminate structure and the number of Al sheet. Impact properties for laminate composites have been evaluated both in the laminate structure and in the impact load direction. Lamination of Al sheet and MMC layer showed a remarkable improvement in the absorbed impact energy compared to that of monolithic MMC. Laminate composites mounted with Al sheet at the outside of the configuration had a higher impact energy in the edge wise compared to that with Al sheet at the inside. Furthermore, there was an anisotrpy in the impact value of laminate composites, that is, impact values for the flat wise in a constant volume fraction of Al sheet dramatically increased along with Al sheet number, even if impact values fur the edge wise were nearly constant.

• Journal of Electrical Engineering and Technology
• /
• 제13권4호
• /
• pp.1528-1538
• /
• 2018

In this paper, configuration of $1-{\phi}$ seven-level boost DC-link cascade based reversing voltage multilevel inverter (BDCLCRV MLI) is proposed for uninterrupted power supply (UPS) applications. It consists of three level boost converter, level generation unit and full bridge circuit for polarity generation. When compared with conventional boost cascaded H-bridge MLI configurations, the proposed system results in reduction of DC sources, reduced power switches and gate drive requirements. Inverter switching is accomplished by providing appropriate switching angles that is generated by any optimization switching angle techniques. Here, round modulation control (RMC) method is taken as the optimization method and switching angles are derived and the same is compared with various switching angles methods i.e., equal-phase (EP) method, and half-equal-phase (HEP) method which results in improved quality of obtained AC power with lowest total harmonic distortion (THD). Reduction in DC sources and switch count makes the system more cost effective. A simulation and prototype model of $1-{\phi}$ seven-level BDCLCRV MLI system is developed and its performance is analyzed for various operating conditions.