• Journal of Korea Foundry Society
• /
• v.14 no.3
• /
• pp.258-266
• /
• 1994

AC4A $Al/Al_2O_3+SiC_p$ hybrid composites were fabricated by the squeeze infiltration technique. Effect of applied pressure, volume fraction of reinforcement($Al_2O_3$ and SiC) and SiC particle size($4.5{\mu}m$, $6.5{\mu}m$ and $9.3{\mu}m$) on the solidification microstructure of the hybrid composites were examined. Mechanical properties were estimated preliminarly by fractographic observation, hardness measurement and wear test. Results show that the microstructure of the hybrid composites were quite satisfactory, namely revealing relatively uniform distribution of reinforcements and refined matrix. Some aggregation of SiC particle caused by particle pushing was observed especially in the hybrid composites containg in fine particle($4.5{\mu}m$). Refined matrix was attributed to applied pressure and increased nucleation sites with addition of reinforcements. Fractured facet also revealed finer for the hybrid composites possibly due to refined matrix. Hardness and wear resistance increased with volume fraction of reinforcements. For hybrid composites with $9.3{\mu}m$ SiC, hardness was somewhat lower and wear resistance higher than other composites.

• Applied Biological Chemistry
• /
• v.35 no.4
• /
• pp.308-314
• /
• 1992

To examine the characteristics of anti-complementary compounds from Arecae Pericarpium (the pericarps of Areca catechu) which showed the highest activity during our screening procedures, the extraction and purification were performed. AC-1 fraction from Arecae Pericarpium was purified by hot water extraction, methanol reflux, ethanol precipitation, dialysis and lyophilization. This compound had total sugar 48.2%, uronic acid 14.6% and protein 36.8%. Rhamnose, arabinose, mannose and galactose were found in sugar components. By cetavlon (cetyltrimethylammonium bromide) treatment AC-1 was fractionated to AC-2, AC-3 and AC-4. Among them, AC-2 showed the highest activity and yield. By periodate oxidation, AC-2 was deactivated, but had no change in activity by pronase digestion. Moreover active fractions, AC-2-IIIa and AC-2-IIIc isolated from AC-2 by two successive column chromatography using DEAE-Toyopearl $650C(Cl^-form)$ and Sephadex G-100. AC-2-IIIa was mainly made up of rhamnose, mannose, galactose and glucose, and AC-2-IIIc, mannose, galactose and glucose. These both polysaccharides were identified as homogeneous by gel filtration of Sepharose CL-4B and electrophoresis, and molecular weights of them were 120,000 and 15,000, respectively.

• Korean Journal of Acupuncture
• /
• v.24 no.3
• /
• pp.205-221
• /
• 2007

Objectives : Aims of this study is to investigate the effects of $LU8{\cdot}KI7$ in rat induced by experimental focal ischemia. Materials and methods : The focal ischemia was induced by intraluminal filament insertion into middle cerebral artery. The groups divided into 6groups, control; no therapy group after ischemia-induced, AT1; acupuncture therapy group at $LU8{\cdot}KI7$ after ischemia-induced, AT2; acupuncture therapy at $LU8{\cdot}KI7$ bilaterally and the needle was twirled and rotated forward with the thumb of the right hand 9times, AT3; acupuncture therapy at $LU8{\cdot}KI7$ bilaterally and the needle was twirled and rotated forward with the forefinger of the right hand 9times, AT4; acupuncture therapy at$LU8{\cdot}KI7$ bilaterally and the needle was inserted to the direction following the flowing route of the meridian(digital direction), AT5; acupuncture therapy at $LU8{\cdot}KI7$ bilaterally, the needle was inserted to the direction following the flowing route of the meridian(digital direction) and the needle was twirled and rotated forward with the thumb of the right hand 9times. Acupuncture therapy was carried out 7times during 2weeks after focal ischemia-induced. The anti-apoptotic and neuroprotective effects of acupuncture are observed by Bax, Bcl-2, mGluR5, cytochrome c, Cresyl violet and ChAT-stain. Results : The intensity of Bax was decreased in AC1, AC4, AC5 group, was increased in AC2, AC3 group. The intensity of Bcl-2 was increased in AC2, AC3, AC4, AC5 group. The intensity of mGluR5 was decreased in AC1 group, was increased in AC4, AC5 group. The intensity of Cytochrome c was increased in ACI, AC2 group, was decreased in AC4, AC5 group. The density of neurons stained by Cresyl violet was increased in all group without control group. The density of ChAT was increased in AC2, ACS group. Conclusions : Our study suggests that AC5 group show anti-apoptotic and neuroprotective effects on cholinergic neuron in focal cerebral ischemia of the stroke in rats.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.8
• /
• pp.1062-1068
• /
• 2002

In our previous study, it was proven that the mean size and the total number concentration of carbon soot particles emitted from a $C_2$H$_4$ normal diffusion flame decreased when a DC corona was discharged to pin-pin electrodes. In this work the effect of AC corona discharge on soot emission was investigated and compared with that of DC corona discharge. For the pin-pin electrodes the size of soot particles and the number concentration decreased by the AC voltage. There were only slight changes in size distribution with frequencies, while the magnitude of applied voltage was constant. When the electric field was applied to plate-plate electrodes, the size and the number concentration also decreased with the applied AC voltages. For applied voltages above 2kV the effect of frequency increase on the soot emission was effective.

• Journal of Korea Foundry Society
• /
• v.20 no.6
• /
• pp.407-418
• /
• 2000

The effect of various factors on the results of degassing of AC4C aluminum alloy melt by using rotary degasser were investigated. The difference between the effects of nitrogen gases of commercial pure and high purity grades on the degassing results was not significant. The optimum degassing condition was obtained. The effect of holding and degassing temperature was not significant, either. The result of degassing was deteriorated by the modification treatment of eutectic silicon, meanwhile improved by the grain refining. The effect of the latter was stronger than that of the former when the melt was treated simultaneously. The volume fractions of hydrogen porosity of the castings obtained from the molds with water moisture such as natural and green sand molds were much higher than those from the molds without that such as pep-set and $CO_2$ molds.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.15 no.4
• /
• pp.93-101
• /
• 2019

This paper presents a software design and implementation of software-defined radio based IEEE 802.11ac encoder using Texas Instruments TMS320C6670 digital signal processor (DSP) platform. In this paper, the implemented encoder has the capability of generating all the signals consisting of preamble field and data field under different modulation & coding scheme in the IEEE 802.11ac standard. Moreover, the flexibility in choosing different rate, bandwidth, or mode can also be achieved by software reconfiguration using the DSP. As a result, by utilizing the computing power provided by multi-cores as well as the FFT coprocessors in the DSP, the required maximum throughput 78Mbps can be fully reached within 4 ㎲ for each OFDM symbol in the case of 20MHz bandwidth of IEEE 802.11ac.

• Journal of the Korean Society for Heat Treatment
• /
• v.7 no.3
• /
• pp.160-168
• /
• 1994

This was studied about mechanical characteristic of AC4A/SiCw 10-30% reinforced composites. Tensile strength of pressed base metal(base metal) with SiCw preform was higher than without pressed base metal(AC4A). If SiCw whisker volume fraction was increased, tensile strength at room temperature was increased. And tensile strength of SiCw 30% was about $35kg/mm^2$. Tensile strength of SiCw 30 % $400^{\circ}C$ at same time aging was the most excellence, about $40kg/mm^2$. The fracture energy value of composite material at three point bending test was higher than AC4A. Dislocation at matrix of composite material was evenly distributed. But dislocation around whisker of composite material was more existed than matrix. The reasom was thought of pile-up around whisker.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.5
• /
• pp.1760-1767
• /
• 2010

FAT compounds photocatalysts were prepared with $TiOSO_4{\cdot}xH_2O$ (TOS) by a sol-gel method. The samples were characterized by scanning electron microscopy (SEM), BET specific surface area, X-ray diffraction analysis (XRD) and energy dispersive X-ray spectroscopy (EDX). The SEM results showed that ferric compounds and titanium dioxide were fixed onto the AC surfaces. The XRD results showed that Fe-AC/$TiO_2$ composites mostly contained anatase phase. EDX showed the presence of C, O, and Ti with Fe peaks in all samples. The photocatalytic activities were evaluated by the photocatalytic oxidation of methylene blue (MB) solution, via compare photodegradation of MB solution under visible light and UV light separately. Fe-AC/$TiO_2$ composites had an excellent photocatalytic under strong visible light irradiation. A small amount of Fe ions in AC/$TiO_2$ particles could obviously enhance their photocatalytic activity.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.10
• /
• pp.78-84
• /
• 2010

This paper describes the safety assessment of power cable splices connecting different sized 6/10[kV] class power cables. To assess the safety, AC withstand voltage tests, partial discharge tests and impulse tests were carried out to the cable splice specimens and thermal rise due to overload and cross section of joint were examined as well. As a result, a breakdown due to the $4.5[U_0](27[kV_{ac}])$ application could not found for 5 minutes. Under $1.73[U_0](10.4[kV_{ac}])$ application, partial discharges of 4~8[pC] were detected. In impulse tests, all the specimens withstood to the standard waveforms of $75[kV_{peak}](1.2{\times}50[{\mu}s])$ without any breakdowns. In addition, the temperature on the splice rose by $3[^{\circ}C]$ when the 200[A] flew through the splice for 20minutes, however the thermal rise of $3[^{\circ}C]$ was considered due to the atmospheric temperature. After all the electrical tests, the cross section of the splice was visually examined. The conditions of the conductors of both $185[mm^2]$ and $240[mm^2]$ were good.

• Ecology and Resilient Infrastructure
• /
• v.2 no.2
• /
• pp.177-184
• /
• 2015

This study assessed the performance of activated carbon (AC) amendment to treat polycyclic aromatic hydrocarbons (PAHs) including both parent- and alkylated-moieties in sediment impacted by diesel. A field-collected, diesel-impacted sediment with a NAPL content of 1% was used for the study. No. 2 diesel fuel is weathered by heating at $70^{\circ}C$ for 4 days to obtain a weathered diesel sample having C3-naphthalenes to C2-phenanthrenes/anthracenes (N2/P3) ratio similar to the original sediment. The sediment samples spiked with the weathered diesel to obtain non-aqueous phase liquid (NAPL) contents of 1, 5 and 10% were contacted with AC with a dose of 5% as sediment dry weight for 1 month. By the AC-sediment contact, the freely-dissolved equilibrium concentrations were substantially reduced. Even for sediment with 10% NAPL content, the reductions in the freely-dissolved concentrations were 92% and 75% for total parent-and alkylated-PAHs, respectively. The effect of NAPL contents on the performance of AC was negligible for parent-PAHs, while for alkylated-PAHs, a slightly reduced AC performance was observed. The results suggest that the AC amendment can be an effective option for the treatment of petroleum-impacted sediment with relatively high NAPL contents.