• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.9
• /
• pp.138-145
• /
• 1999

Surface hardening of AC4C aluminium alloy with TiC powders was obtained by plasma transferred are (PTA) method, Bead appearance, microstrucutre and wear behavior were characterized in relation to the torch current, powder feed rate and wear condition. The width and the depth of bead were mainly increased with increasing torch current. The comparison of wear behavior between AC4C alloy and PTA treated AC4C alloy showed the remarkable enhancement of wear resistance.

• Korean Journal of Materials Research
• /
• v.7 no.6
• /
• pp.460-463
• /
• 1997

에폭시 수지 계의 경화반응 속도를 증가시키고 기계적 물성을 향상시키기 위해 합성 pheny1 glycidy1 ether(PGE)-acetamide(AcAm)를 diglycidy1 ether of bispenol A(DGEBA)/4,4'-methylene dianiline(MDA)계에 도입하였다. PGE와 AcAm을 2:1의 몰비로 혼합한 후 18$0^{\circ}C$에서 1시간 반응시켜서 PGE-AcAm을 합성하였다. 5phr의 PGE-AcAm이 첨가되었을 때 인장강도가 15% 개선되었으며, 그 이후로는 PGE-AcAm을 합성하였다. 5phr의 PGE-AcAm이 첨가되었을 때 인장강도가 15% 개선되었으며, 그 이후로는 PGE-AcAm의 함량에 관계없이 거의 비슷한 값을 나타내었다. 반면에유리전이 온도(Tg)와 충격강도는 PGE-AcAm의 함량이 증가함에 따라 감소하였다. 파단면은 PGE-AcAm이 첨가됨으로써 더 복잡한 형상을 나타내었다.

• Journal of Power System Engineering
• /
• v.7 no.4
• /
• pp.44-48
• /
• 2003

Alumium alloys casting are gaining increased acceptance in the automotive and electronic industeries and squeeze casting is the most efficient method of manufacturing such mass produced parts. This study has been investigated the microstructures and mechanical properties of Al-7.0Si-0.4Mg(AC4C)alloy fabricated by squeeze casting process for development of Engine Mountain Bracket. The microstructure of squeeze casted specimen were composed of eutectic structure Alumimim solid solution and $Mg_2Si$ precipitates. The tensile strength of as-solid solution treatment Al-7.0Si-0.4Mg alloy revealed 2985MPa. It was found that Al-7.0Si-0.4Mg alloy have good aging hardening effect results are presented to show the validity of the control method.

• Korean Journal of Agricultural Science
• /
• v.26 no.2
• /
• pp.25-32
• /
• 1999

An in vitro study was conducted to examine the effects of the addition of activated charcoal (AC) on the ruminal fermentation characteristics, nutrient disappearance, and ruminal gas production. AC was added at the levels of 0.00, 0.25, and 0.50 % to each of the four types of diets (roughage/concentrate ratio : 8/2, 6/4, 4/6 and 2/8), respectively. Although not significant, ruminal pH tended to increase by adding AC, and as the concentrate level increased, ruminal pH decreased (P<0.05). Acetate concentration and acetate/propionate molar ratio tended to decrease in AC diets. but molar % of propionate tended to increase by the addition of AC. Ruminal degradation of dry matter, crude protein, NDF, ADF, and hemicellulose in AC diets tended to increase than in non-AC diet, however, no tendency in ruminal degradation of crude fat was observed. As the concentrate level increased, rumunal degradation of dry matter and nutrients in AC diets increased significantly(P<0.05). Ruminal gas production tended to decrease in the 0.50 % AC diets, however, it tended to increase in high roughage diets. Although there appeared some beneficial effects in adding AC to ruminant diets in this study, more works should be done with AC before we can make clear conclusion on the use of AC in the ruminant diets.

• Bulletin of the Korean Chemical Society
• /
• v.13 no.6
• /
• pp.627-631
• /
• 1992

The dihydrido iridium(Ⅲ) complex [$Ir(PPh_3)_2H_2(ac)_2$]$BF_4$ (ac=acetone) reacts with 2-phenylpyridine and 7,8-benzoquinoline to yield the C-H activated complexes [$Ir(PPh_3)_2$H(ac)(L)]$BF_4$ (L= phenylpyridine; 7,8-benzoquioline). The dihydrido iridium(Ⅲ) complex [$Ir(PPh_3)_2H_2(ac)_2$]$BF_4$ also reacts with triaklysilane via an oxidative addition reaction to yield the trihydrido iridium complexes [$Ir(PPh_3)_2H_3SiR_3$]$BF_4$ (R =Et and Ph). The structual configuration was studied by conventional spectroscopy.

• Korean Journal of Materials Research
• /
• v.4 no.6
• /
• pp.651-661
• /
• 1994

Utilizing Mechanical Alloy Process, that were obt,ained the results from investigated formation process of AC4A/$SiC_p$. composite material powders and mechanical properties of their extrusion materials. The obtained results are as follow conclusions. AC4A-lOwt.% $SiC_p$ powders which were mechanically alloyed at 150rpm for 420min have been obtained finely and uniformly rounded powder particals that were reached the steady state which was saturated micro hardness about tlv 230 in the range size of 1 0 ~ 2 0$\mu \textrm{m}$. EDAX analysis tests have been resulted in a little amount of I'e conrents increasing with MA times, the artifical aging of AC4A/S$SiC_p$ composite materials was obtained the hardness with solution treated at $525^{\circ}C$ for lOhrs the maximum value of Hv 230 with aging at. $170^{\circ}C$ for 1000min. The Intensity and width of X-ray diffraction pattern were decreasing and widening because of grain boundary refinement and heterogeneous strain during mechanical alloying. Tensile tests at room temperature were carried out the maximum value of 37 Kgf/$\mu \textrm{mm}^2$ with ext,rused materials, 27 Kgf/$\mu \textrm{mm}^2$ with heat treated them at $500^{\circ}C$.

• The Korean Journal of Pesticide Science
• /
• v.6 no.3
• /
• pp.218-223
• /
• 2002

The rate of hydrolysis of insecticide, O,O-diethyl-O-(1-phenyl-3-trifluoromethylpyrazol-5-yl)phosphorothioate (Flupyrazofos) have been investigated in 25% (v/v) aqueous dioxane (${\mu}=0.1M$) at $45^{\circ}C$. The hydrolysis mechanism of flupyrazofos proceeds through the specific acid ($A_{AC}2$) catalysis below pH 4.0, specific base ($B_{AC}2$) catalysis above pH 11.0 and general acid & base ($B_{AC}2$) catalysis between pH 5.0 and pH 10.0 via trigonal-bipyramidal ($d^2sp^3$) intermediate as evidence by solvent effect ($|m|{\ll}|{\ell}|$), rate equation ($kt=ko+k_H+ [H_3O^+]+k_{OH}[OH^-]$) and product analysis. The half-life ($T\frac{1}{2}$) of hydrolytic degradation in neutral media at $45^{\circ}C$ was ca. 3 months.

• Transactions on Electrical and Electronic Materials
• /
• v.14 no.4
• /
• pp.221-224
• /
• 2013

Effects of ambient temperature on the ac electrical treeing and breakdown behaviors in an epoxy/layered silicate (1 wt%) were carried out in needle-plate electrode geometry. A layered silicate was exfoliated in an epoxy base resin,, using our ac electric field apparatus. To measure the treeing initiation and propagation, and the breakdown rate, constant alternating current (ac) of 10 kV (60 Hz) was applied to the specimen in a needle-plate electrode arrangement, at $30^{\circ}C$, $90^{\circ}C$ or $130^{\circ}C$ of insulating oil bath. At $30^{\circ}C$, the treeing initiation time and the breakdown time in the epoxy/layered silicate (1 wt%) system were 1.4 times higher than those of the neat epoxy resin. At $90^{\circ}C$ (lower than Tg), electrical treeing was initiated in 55 min, and propagated until 1,390 min at the speed of $0.35{\times}10^{-3}mm/min$, which was 4.4 times higher than that at $30^{\circ}C$; however, there was almost no further treeing propagation after 1,390 min. At $130^{\circ}C$ (higher than Tg), electrical treeing was initiated in 44 min, and propagated until 2,000 min at the speed of $0.96{\times}10^{-3}mm/min$. Typical branch type electrical treeing was obtained from the neat epoxy and epoxy/layered silicate at $30^{\circ}C$, while bush type treeing was observed out from the needle tip at $90^{\circ}C$ and $130^{\circ}C$.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.1
• /
• pp.60-68
• /
• 2010

In case of sensorineural hearing loss, auditory perception can be activated by electrical stimulation of the nervous system via electrode implanted into the cochlea or auditory nerve. Since the tonotopic map of the human auditory nerve has not been definitively identified, the recording of auditory nerve signal with microelectrode is desirable for determining the tonotopic map. This paper proposes the multi-channel analog front-end for auditory nerve signal detection. A channel of the proposed analog front-end consists of an AC coupling circuit, a low-power 4th-order Gm-C LPF, and a single-slope ADC. The AC coupling circuit transfers only AC signal while it blocks DC signal level. Considering the bandwidth of the auditory signal, the Gm-C LPF is designed with OTAs adopting floating-gate technique. For the channel-parallel ADC structure, the single-slope ADC is used because it occupies the small silicon area. Experimental results shows that the AC coupling circuit and LPF have the bandwidth of 100 Hz - 6.95 kHz and the ADC has the effective resolution of 7.7 bits. The power consumption per a channel is $12\;{\mu}W$, the power supply is 3.0 V, and the core area is $2.6\;mm\;{\times}\;3.7\;mm$. The proposed analog front-end was fabricated in a 1-poly 4-metal $0.35-{\mu}m$ CMOS process.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1994.11a
• /
• pp.163-163
• /
• 1994