• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.05a
• /
• pp.70-73
• /
• 2007

생활수준의 향상으로 인하여 조명 및 디스플레이 제품을 이용하여 건물 및 건축물에 대하여 장식을 하는 것이 일반화 되어가고 있다. 본 연구에서는 옥외 및 옥내에 사인물로 사용되어지고 있으며 설치가 간편한 디스플레이 조명기기인 LED Tile을 개발하여 옥내 및 옥외용 디스플레이 조명 시장의 시장성 확보하기 위하여, 광학설계를 통한 고휘도 LED의 선정 및 배치, 케이스 설계를 실시하고 LED모듈에 AC 220V 전원을 직접 인가할 수 있으며 효율이 높고 최적화된 구동회로를 설계하였다. 또한 One Chip 마이크로컨트롤러를 사용하여 RGB LED의 광색가변 및 점멸 제어회로를 설계하고, LED 모듈간에 2개의 제어선만을 연결하여 다양하고 다이나믹한 패턴 동작(점멸, 광색가변)이 가능하도록 펌웨어를 설계하였다. 그 결과 설계된 LED Tile은 전체 크기가 $D130{\times}W130{\times}H50mm$로 매우 컴팩트하고 LED 배치 및 광학설계를 통하여 최대광도 60cd를 실현하였으며, LED Tile의 동작개수에 관계없이 설치가 간단하며 10개 이상의 디스플레이 패턴 제어가 가능하였다.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1671-1672
• /
• 2006

사인물의 대명사인 네온사인 및 옥외용 광고 조명기기를 대체할 수 있는 LED Lighting Bar를 개발하여 옥외용 광고 시장의 시장성 확보하기 위하여, 광학설계를 통한 고휘도 LED의 선정 및 배치, 케이스 설계를 실시하고 LED모듈에 AC 220V 전원을 직접 인가할 수 있으며 효율이 높고 컴팩트한 구동회로를 설계하였다. 또한 One Chip 마이크로컨트롤러를 사용하여 RGB LED의 광색가변 및 점멸 제어회로를 설계하고, LED 모듈간에 2개의 제어선만을 연결하여 다양하고 다이나믹한 네온사인 동작(점멸, 광색가변)이 일어나도록 소프트웨어를 설계하였다. 그 결과, 설계된 LED Lighting Bar는 전체 크기가 $D150{\times}W50{\times}H50mm$로 매우 컴팩트하고 LED 배치 및 광학설계를 통하여 최대광도 70cd를 실현하였으며, LED Lighting Bar의 동작개수에 관계없고 설치가 간단하며 10개 이상의 사인 패턴 제어가 가능하였다.

• Biomolecules & Therapeutics
• /
• v.30 no.6
• /
• pp.540-545
• /
• 2022

Betulin is a triterpenoid natural product contained in several medicinal plants including Betulae Cortex. These medicinal plants have been used for controlling diverse inflammatory diseases in folk medicine and betulin showed anti-inflammatory, antioxidative, and anticancer activities. In this study, we tried to examine whether betulin exerts a regulative effect on the gene expression of MUC5AC mucin under the status simulating a pulmonary inflammation, in human airway epithelial cells. Confluent NCI-H292 cells were pretreated with betulin for 30 min and then stimulated with phorbol 12-myristate 13-acetate (PMA) for 24 h or the indicated periods. The MUC5AC mucin mRNA expression and mucin glycoprotein production were measured by reverse transcription - polymerase chain reaction (RT-PCR) and enzyme-linked immunosorbent assay (ELISA), respectively. To elucidate the action mechanism of betulin, effect of betulin on PMA-induced nuclear factor kappa B (NF-kB) signaling pathway was also investigated by western blot analysis. The results were as follows: 1) Betulin significantly suppressed the production of MUC5AC mucin glycoprotein and down-regulated MUC5AC mRNA expression induced by PMA in NCI-H292 cells. 2) Betulin inhibited NF-κB activation stimulated by PMA. Suppression of inhibitory kappa B kinase (IKK) by betulin led to the inhibition of the phosphorylation and degradation of inhibitory kappa B alpha (IκBα), and the nuclear translocation of NF-κB p65. This, in turn, led to the down-regulation of MUC5AC glycoprotein production in NCI-H292 cells. These results suggest betulin inhibits the gene expression of mucin through regulation of NF-kB signaling pathway, in human airway epithelial cells.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.254-255
• /
• 2012

본 논문은 부스트 컨버터가 통합된 형태의 Single-Stage AC-DC 컨버터에서 스위치를 통과하는 전류의 정보를 이용하여 일차측 전류 제어 루프를 구성하기 위한 전류 복원 기법을 제안한다. 밸리-필 회로가 추가된 Single-Stage AC-DC 부스트 컨버터 통합형 플라이백 컨버터로 구성된 6W/250mA 출력의 프로토타입을 제작하여 일차측 전류 제어와 전류 복원 기법을 이용하여 일정 전류 제어가 이루어짐을 확인하였다.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.2
• /
• pp.109-115
• /
• 2014

The research on solar energy that we get from nature to cope with energy exhaustion is a very significant and inevitable task for us to do. Along with this, lately, in Korea, as part of new growth engine industry regarding low-carbon green growth, we have selected the LED(Light Emitting Diode) as low power consuming, eco-friendly lighting equipment and have been facilitating research and development on it and creating a variety of new industries utilizing it. What was developed here in this research was the photovoltaic LED lighting system applying lithium polymer batteries equipped with the excellent performance of lithium ion batteries as well as significantly low explosive hazard. Its photovoltaic panel was made to have 100W capacity, and for its power supply system, functional convenience was considered so that it could be equipped with both DC and AC power to be used as household electricity in a variety of ways.

• Journal of Advanced Navigation Technology
• /
• v.22 no.5
• /
• pp.420-428
• /
• 2018

In this paper, represented uninterruptible power supply (UPS) equipment maintaining constant output voltage, the proposes a photovoltaic system constructed with a step up boosting chopper and single phase pulse width modulation (PWM) voltage source inverter. as power source disconnection, voltage variation and output current variation with load variation. This system is driven by being synchronized voltage fed inverter and AC source, and in the steady state of power source charge battery connected to DC side with solar cell using a Photovoltaic that it was so called constant voltage charge. It can be results of saving electric power, and through a normal operation of energy storage system (ESS), the system operated the LED a calling on signal changes at the airport in an efficient manner. In addition, better output waveform was generated because of PWM method, and it was proved to test by experiment maintained constant output voltage regardless of AC source disconnection, load variation, and voltage variation of AC power source.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.242-243
• /
• 2012

In this paper, 200 W power supply for LED driver has been designed, analyzed, simulated and tested. Input AC voltage of 100VAC-240VAC was converted to DC voltage by high power factor converter. Output voltage was controlled, and output current was controlled by constant current when output current was reached to LED maximum rated current. By simulation and experimental test, voltage and current control and high power factor characteristics are verified.

• Journal of Institute of Convergence Technology
• /
• v.3 no.1
• /
• pp.37-40
• /
• 2013

Plant factory industry as a new agriculture is in the spotlight. In this paper, we experimented plant factory applied photovoltaic system and LED lighting. For growing the plant, red, blue and white LED were placed into 1:4:3. Electric power generated by the photovoltaic system was supplied on DC power supply instead of AC. The designed and experimented power generation amount per day of photovoltaic system were 2,860 Wh and 2,272 Wh respectively. Plant has not been grown at the dead space of LED lighting so it is required to array LED lighting.

• Journal of Sensor Science and Technology
• /
• v.24 no.3
• /
• pp.145-150
• /
• 2015

We introduce a new method of time-division visible light communication (VLC) using LED lamp light for the generation of synchronizing pulses. The LED lamp, driven by an AC 220-V power line, radiates light that has a 120-Hz frequency component. The pulse generator in each VLC system receives the LED lamp light and generates the synchronizing pulses that are required for time-division transmission of multiple VLC channels. The pulse period is subdivided into several time slots for VLC channels. In experiments, 120-Hz synchronizing pulses were generated using LED lamp light, and three VLC channels were transmitted independently without interfering with each other in a condition where the VLC signals overlapped in space. This configuration is useful in constructing multiple wireless sensor networks that are safe and without interference in locations where LED lamps are used for illumination.

• Proceedings of the KIPE Conference
• /
• 2010.11a
• /
• pp.363-364
• /
• 2010

Most LED drivers uses current control method to adjust LED current. Using AC power grid such as off-line converter, Buck topology is popular because input voltage of LED driver is much higher than LED output voltage. Normally DCM current control is more popular than CCM current mode control in the range of below 50W, But DCM characteristics are dependent on the input voltage variation. This paper deals with what should be considered in DCM for LED driver with valley fill circuit.