• 한국정보통신학회논문지
• /
• 제11권10호
• /
• pp.1894-1898
• /
• 2007

본 연구는 산업체에서 널리 사용되어지고 있는 기존의 3상 AC-DC 컨버터에서 무게와 부피를 획기적으로 줄일 수 있는 고역율 3상 AC-DC컨버터를 제안하였다. 제안된 고역율 3상 AC-DC 컨버터는 LC 필터를 제거 한 상태에서 효율성과 다탕성을 검증함으로써 경량화는 물론 저 비용을 실현할 수 있게 된다. 또한 LC 필터를 제거하였음에도 불구하고 성능 면에서 볼 때 기존의 AC-DC 컨버터와 비슷한 성능을 얻을 수 있으므로 고전력 밀도 및 고역율이 요구되는 항공 우주 분야에 응용이 가능해 질 것으로 기대된다.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제1권1호
• /
• pp.67-76
• /
• 2012

Due to the increasing amount of applications of power electronic ac-dc converters, it is necessary to design a single-stage converter that can reliably perform both buck and boost operations. Traditionally, this can be achieved by double-stage conversion (ac/dc-dc/dc) which ultimately leads to less efficiency and a more complex control system. This paper discusses two types of modern ac-dc converters. First, the novel impedance-source ac-dc converter, abbreviated as custom Z-source rectifier, is analyzed; and then, switched inductor (SL) Z-source ac-dc converter is proposed. This paper describes the Z-source rectifiers' operating principles, the concepts behind them, and their superiorities. Analysis and simulation results show that the proposed custom Z-source rectifier can step up and step down voltage; and the main advantage of the SL Z-source ac-dc converter is its high step-up capability. Low ripple of the output dc voltage is the other advantage of the proposed converters. Finally, the SL Z-source ac-dc converter is compared with the custom Z-source ac-dc converter.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2014년도 추계학술대회
• /
• pp.267-270
• /
• 2014

본 논문에서는 진동에너지 수확을 위한 CMOS 인터페이스 회로를 설계하였다. 제안된 회로는 AC-DC 변환기와 DC-DC 부스트 변환기로 구성된다. AC-DC 변환기는 진동소자(PZT)에서 출력되는 AC 신호를 DC 신호로 변환해주는 역할을 하며, DC-DC 부스트 변환기는 AC-DC 변환기에서 출력된 신호를 원하는 값으로 승압 및 안정화 시키는 역할을 한다. AC-DC 변환기는 효율 특성이 좋은 능동 다이오드를 이용한 전파정류기를 사용하였으며, DC-DC 부스트 변환기는 제어 회로가 간단한 쇼트키 다이오드를 사용한 구조를 이용하였다. 또한 진동소자로부터 최대전력을 수확하기 위한 MPPT(Maximum Power Point Tracking) 기능을 적용하였다. 제안된 회로는 0.35um CMOS 공정으로 설계되었으며, 설계된 칩의 면적은 $530um{\times}325um$이다. 설계된 회로의 성능을 검증한 결과 AC-DC 변환기와 DC-DC 부스트 변환기의 최대 효율은 각각 97.7%와 89.2%이며, 전체회로의 최대 효율은 87.2%이다.

• Journal of Power Electronics
• /
• 제3권4호
• /
• pp.249-258
• /
• 2003

This paper presents a high-efficient and cost effective three-phase AC/DC-DC/AC power conversion system with a single two-switch type active Auxiliary Resonant DC Link (ARDCL) snubber circuit, which can minimize the total power dissipation. The active ARDCL snubber circuit is proposed in this paper and its unique features are described. Its operation principle in steady-state is discussed for the three phase AC/DC-DC/AC converter, which is composed of PWM rectifier as power factor correction (PFC) converter, sinewave PWM inverter. In the presented power converter system not only three-phase AC/DC PWM rectifier but also three-phase DC/AC inverter can achieve the stable ZVS commutation for all the power semiconductor devices. It is proved that the proposed three-phase AC/DC-DC/AC converter system is more effective and acceptable than the previous from the cost viewpoint and high efficient consideration. In addition, the proposed two-switch type active auxiliary ARDCL snubber circuit can reduce the peak value of the resonant inductor injection current in order to maximize total system actual efficiency by using the improved DSP based control scheme. Moreover the proposed active auxiliary two-switch ARDCL snubber circuit has the merit so that there is no need to use any sensing devices to detect the voltage and current in the ARDCL sunbber circuit for realizing soft-switching operation. This three-phase AC/DC-DC/AC converter system developed for UPS can achieve the 1.8% higher efficiency and 20dB lower conduction noise than those of the conventional three-phase hard-switching PWM AC/DC-DC/AC converter system. It is proved that actual efficiency of the proposed three-phase AC/DC-DC/AC converter system operating under a condition of soft switching is 88.7% under 10kw output power.

• Journal of electromagnetic engineering and science
• /
• 제11권3호
• /
• pp.161-165
• /
• 2011

In this paper, a high-efficiency DC-AC converter is used for wireless energy transmission. The DC-AC convertter is implemented by combining the oscillator and power amplifier. Given that the conversion efficiency of a DC-AC converter is strongly affected by the efficiency of the power amplifier, a high-efficiency power amplifier is implemented using a class-E amplifier structure. Also, because of the low output power of the oscillator connected to the input stage of the power amplifier, a high-gain two-stage power amplifier using a drive amplifier is used to realize a high-output power DC-AC converter. The high-efficiency DC-AC converter is realized by connecting the oscillator to the input stage of the high-gain high-efficiency two-stage class-E power amplifier. The output power and the conversion efficiency of the DC-AC converter are 40.83 dBm and 87.32 %, respectively, at an operation frequency of 13.56 MHz.

• 전력전자학회논문지
• /
• 제19권5호
• /
• pp.422-430
• /
• 2014

This study proposes a small-signal model and control design for a two-stage DC-DC-AC converter to investigate its dynamic characteristics in relation to battery energy storage system. When the circuit analysis of the two-stage DC-DC-AC converter is attempted simultaneously, the mathematical procedure of deriving the dynamic equation is complex and difficult. The main idea of modeling the two-stage DC-DC-AC converter states that this topology is separated into a bidirectional DC-DC converter and a single-phase inverter with an equivalent current source corresponding to that of the inverter or converter. The dynamic equations for the separated converter and inverter are then derived using the state-space averaging technique. The procedures of building the small-signal model of the two-stage DC-DC-AC converter are described in detail. Based on the derived small-signal model, the individual controllers are designed through a frequency-domain analysis. The simulation and experimental results verify the validity of the proposed modeling approach and controller design.

• Journal of Electrical Engineering and Technology
• /
• 제3권2호
• /
• pp.152-161
• /
• 2008

This paper deals with a new wave shaping technique for cost effective harmonic mitigation in ac-dc converter feeding Vector Controlled Induction Motor Drives(VCIMD's) for improving power quality at the point of common coupling(PCC). The proposed harmonic mitigator consists of a polygon connected autotransformer based twelve-pulse ac-dc converter and a small rating passive shunt filter tuned for $11^{th}$ harmonic frequency. This ac-dc converter eliminates the most dominant $5^{th},\;7^{th},\;and\;11^{th}$ harmonics and imposes the reduction of other higher order harmonics from the ac main current, thereby improving the power quality at ac mains. The design of autotransformer is carried out for the proposed ac-dc converter to make it suitable for retrofit applications, where presently a 6-pulse ac-dc converter is used. The effect of load variation on VCIMD is also studied to demonstrate the effectiveness of the proposed ac-dc converter in a wide operating range of the drive. Experimental results obtained on the developed laboratory prototype of the proposed harmonic mitigator are used to validate the model and design of the ac-dc converter.

• Journal of Electrical Engineering and Technology
• /
• 제3권2호
• /
• pp.235-242
• /
• 2008

In this paper, a 24-pulse AC-DC converter is designed, modeled, simulated, and developed to feed non-isolated varying loads. The proposed AC-DC converter configuration consists of an auto-transformer based on zigzag connection to overcome current harmonic problems in AC mains. It improves power quality at AC mains and it meets IEEE-519 standard requirements at varying loads. A set of power quality indices on input AC mains and on DC buses for a load fed from 6-pulse and 12-pulse AC-DC converters is also given to compare their performance. It is observed that input current total harmonic distortion(THD) of less than 8% is possible with the proposed topology of AC-DC converter at varying loads.

• Journal of Power Electronics
• /
• 제8권2호
• /
• pp.109-120
• /
• 2008

In this paper, a novel delta/double-fork transformer based 18-pulse full-wave AC-DC converter is designed, modeled, simulated and developed to feed isolated DC varying loads. The proposed AC-DC converter is used for low voltage and large current DC loads in applications such as electrowinning, where isolation is required mainly for stepping down the supply voltage. The proposed converter improves power quality at AC mains and meets IEEE-519 standard requirements at varying loads.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 추계학술대회
• /
• pp.412-415
• /
• 2015

본 논문에서는 진동에너지 수확을 위한 MPPT(Maximum Power Point Tracking) 제어 CMOS 인터페이스 회로를 설계하였다. 제안된 회로는 AC-DC 변환기, MPPT 제어회로, DC-DC 부스트 변환기, 그리고 PMU(Power Management Unit)로 구성된다. AC-DC 변환기는 진동소자(PZT)에서 출력되는 AC 신호를 DC 신호로 변환해주는 역할을 하며, MPPT 제어회로는 진동소자로부터 최대전력을 수확하여 효율을 높이는 역할을 한다. DC-DC 부스트 변환기는 AC-DC 변환기에서 공급된 에너지를 원하는 값으로 승압 및 안정화 시키는 역할을 하며 PMU를 통해 부하로 에너지를 전달한다. AC-DC 변환기는 효율 특성이 좋은 능동 다이오드를 이용한 전파정류기를 사용하였으며, DC-DC 부스트 변환기는 제어 회로가 간단한 쇼트키 다이오드를 사용한 구조를 사용하였다. 제안된 회로는 0.35um CMOS 공정으로 설계되었으며, 설계된 칩의 면적은 $950um{\times}920um$이다.