• 한국주조공학회지
• /
• 제17권2호
• /
• pp.195-206
• /
• 1997

AC8A matrix composites reinforced with Ni-aluminide were fabricated by squeeze casting process, and the characteristics and nature of the growth of Ni-aluminide phases at the interface between nickel and aluminurn were investigated. In the as-cast composites, the reaction layer between Ni skeleton and aluminum matrix was found to be $NiAl_3$, regardless of the casting temperatures and the kinds of preforms. During high temperature solution treatment the $NiAl_3$ layer grew and formed new $Ni_2Al_3$ layer. Because of presence of the porosity formed by Kirkendall effect at the interface between $NiAl_3$ and aluminum matrix, the tensile strength of composites was inferior to that of AC8A matrix alloy. However, the composites exhibited superior wear resistance due to the formation Ni-aluminide intermetallic phases. Composite A, of which Ni skeleton was fully transformed into Ni-aluminide, shows better wear resistance than that of composite B which still possessed some unreacted Ni skeleton.

• 한국주조공학회지
• /
• 제39권4호
• /
• pp.61-74
• /
• 2019

The effects of Sr and (Ti-B) additives on the impact and fatigue properties of recycled (35% scrap content) AC4A aluminum alloy are investigated here. The acicular morphology of the eutectic Si phase of as-cast specimens was converted to the fibrous one with Sr additives. The grain size of the α-solid solution decreased by the addition of (Ti-B) additives. The crack initiation energy (E_i) of the impact absorption energy decreased due to the incorporation of an oxide film and inclusions depending on the scrap used. The modification of the eutectic Si morphology by Sr additives is considered as the main factor of the increase of the average impact absorption energy (E_t). The addition of (Ti-B) additives contributed to an increase in the occurrence of crack deflections due to the refining of α-Al grains, resulting in improved fatigue properties.

• 공업화학
• /
• 제31권5호
• /
• pp.552-559
• /
• 2020

Activated carbon-nickel (II) oxide (AC-NiO) electrodes were studied as materials for the capacitive deionization (CDI) of aqueous sodium chloride solution. AC-NiO electrodes were fabricated through physical mixing and low-temperature heating of precursor materials. The amount of NiO in the electrodes was varied and its effect on the deionization performance was investigated using a single-pass mode CDI setup. The pure activated carbon electrode showed the highest specific surface area among the electrodes. However, the AC-NiO electrode with approximately 10 and 20% of NiO displayed better deionization performance. The addition of a dielectric material like NiO to the carbon material resulted in the enhancement of the electric field, which eventually led to an improved deionization performance. Among all as-prepared electrodes, the AC-NiO electrode with approximately 10% of NiO gave the highest salt adsorption capacity and charge efficiency, which are equal to 7.46 mg/g and 90.1%, respectively. This finding can be attributed to the optimum enhancement of the physical and chemical characteristics of the electrode brought by the addition of the appropriate amount of NiO.

• 대한화학회지
• /
• 제15권2호
• /
• pp.45-48
• /
• 1971

The various eluents have been used for the separations of alkaline earth metals by elutions through cation exchange resin column by many investigators. We find, the mixed solution of 1M HAc and 1M NaAc (pH 4.75) is the best eluent for this purpose, becouse the one step elution through 7cm Dowex 50w${\times}$8(100~200mesh) resin column with this eluent, gives the quantitative separation. When 2M NaAc is used as a eluent Sr(II) and Ba(II) is separated easily without any contamination of Mg(II) andCa(II). The Ca-Pb alloy which is composed of Cu, Ca, Sr, Ba and abundance of Pb metal is separated quantitatively into its components by the two step elution with 0.3M HAc + 0.3M NaAc(PH 4.75) and 0.5M HAc + 0.5M NaAc(PH 4.75) as eluents through 10cm resin column.

• Environmental Engineering Research
• /
• 제24권4호
• /
• pp.600-607
• /
• 2019

Volatile organic compounds (VOCs) are released from various sources and are unsafe for human health. Porous materials are promising candidates for the adsorption of VOCs owing to their increased ratio of surface area to volume. In this study, activated carbon (AC) impregnated cellulose acetate (CA) electrospun mats were synthesized using electrospinning for the removal of VOCs from the air mixture of ACs, and CA solution was electrospun at different proportions (5%, 10%, and 15%) in a single nozzle system. The different AC amounts in the electrospun mats were distributed within the AC fibers. The adsorption capacities were measured for acetone, benzene, and dichloromethane, using quartz crystal microbalance. The results elicited an increasing adsorption capacity trend as a function of the impregnation of ACs in the electrospun mats, while their capacities increased as a function of the AC concentration. Dichloromethane resulted in a faster adsorption process than acetone and benzene owing to its smaller molecular size. VOCs were desorbed with the N₂ gas purging, while VOCs were adsorbed at higher temperatures owing to the increased vapor pressures. The adsorption analysis using Dubinin-Astakhov equation showed that dichloromethane is more strongly adsorbed on mats.

• Journal of Power Electronics
• /
• 제7권3호
• /
• pp.222-232
• /
• 2007

This paper presents the application of a single phase AC-to-DC converter using a three-phase series parallel (SPRC) resonant converter to variable speed dc-drive. The improved power quality converter gives the input power factor unity over a wide speed range, reduces the total harmonic distortion (THD) of ac input supply current, and makes very low ripples in the armature current and voltage waveform. This soft-switching converter not only possesses the advantages of achieving high switching frequencies with practically zero switching losses but also provides full ranges of voltage conversion and load variation. The proposed drive system is the most appropriate solution to preserve the present separately excited de motors in industry compared with the use of variable frequency ac drive technology. The simulation and experimental results are presented for variable load torque conditions. The variable frequency control scheme is implemented using a DSP- TMS320LF2402. This control reduces the switching losses and current ripples, eliminates the EMI and improves the efficiency of the drive system. Experimental results confirm the consistency of the proposed approach.

• Journal of Power Electronics
• /
• 제15권4호
• /
• pp.1139-1147
• /
• 2015

In this paper, an algorithm based on a model analysis of the online calculation of the root-mean-square (RMS) value of welding current for single-phase AC resistance spot welding (RSW) was developed. The current is highly nonlinear and typically non-sinusoidal, which makes the measuring and controlling actions difficult. Though some previous methods focused on this issue, they were so complex that they could not be effectively used in general cases. The electrical model of a single-phase AC RSW was analyzed, and then an algorithm for online calculation of the RMS value of the welding current was presented. The description includes two parts, a model-dependent part and a model-independent part. Using a previous work about online measurement of the power factor angle, the first part can be solved. For the second part, although the solution of the governing equation can be directly obtained, a lot of CPU time must be consumed due to the fact that it involves a lot of complex calculations. Therefore, a neural network was employed to simplify the calculations. Finally, experimental results and a corresponding analysis showed that the proposed algorithm can obtain the RMS values with a high precision while consuming less time when compared to directly solving the equations.

• Carbon letters
• /
• 제9권3호
• /
• pp.203-209
• /
• 2008

The objective of this work is to study the feasibility of the preparation of the activated carbon (AC) from coconut tree flowers using high temperature fluidized bed reactor (HTFBR). The activating agent used in this work is steam. The reactor was operated at various activation temperature (650, 700, 750, 800 and $850^{\circ}C$) and activation time (30, 60, 120 and 240 min) for the production of AC from coconut tree flowers. Effect of activation time and activation temperature on the quality of the AC preparation was observed. Prepared AC was characterized in-terms of iodine number, methylene blue number, methyl violet number, ethylene glycol mono ethyl ether (EGME) surface area and SEM photographs. The best quality of AC from coconut tree flowers (CFC) was obtained at an activation temperature and time of $850^{\circ}C$ and 1 hr restectively. The effectiveness of carbon prepared from coconut tree flowers in adsorbing crystal violet from aqueous solution has been studied as a function of agitation time, carbon dosage, and pH. The adsorption of crystal violet onto AC followed second order kinetic model. Adsorption data were modeled using both Langmuir and Freundlich classical adsorption isotherms. The adsorption capacity $q_m$ was 277.78 mg/g., equilibrium time was found to be 180 min. This adsorbent from coconut tree flowers was found to be effective for the removal of CV dye.

• 한국동물위생학회지
• /
• 제33권2호
• /
• pp.185-197
• /
• 2010

This study was conducted to evaluate the alleviative effects of activated charcoal (AC) and Houttuynia cordata (HC) singly or in combination in broiler chickens during aflatoxicosis. Activated charcoal (1% or 0.5%) and H. cordata (1% or 0.5%) were mixed into the diets for the ability to reduced the deleterious effects of 2.4mg total aflatoxin $(AFB_1)kg^{-1}$ diet on growing broiler chickens from 1 to 21 days of age. A total of 160 1-day-old (Hyline Variety Brown) broiler chicks were housed in eight treatment groups [Control, $AFB_1$, AC 1%, HC 1%, $AFB_1$ plus AC 1% plus HC 1%, $AFB_1$ plus AC 1% plus HC 0.5%, $AFB_1$ plus AC 0.5% plus HC 1%, $AFB_1$ plus AC 0.5% plus HC 0.5%] each consisting of 20 chicks. Compared to control, 2.4mg $AFB_1$ alone treatment group significantly decreased body weight gains of chickens. The addition of mixed AC 1% and HC 1% including 6, 7 groups to the 2.4mg $AFB_1$-containing diet moderately reduced the adverse effects of $AFB_1$ on performances of chickens. The chickens consuming 2.4mg $AFB_1$ plus AC 0.5% and HC 0.5%-containing diet showed very slightly reduced the adverse effects on investigated parameters compared to the $AFB_1$ only treated group. Also, the single addition of AC or HC to the $AFB_1$-free diet had no adverse effects in chickens. These results suggest that AC and HC mixed can reduced the aflatoxicosis in broilers and may be contribute to a solution of the aflatoxicosis problem in poultry production.

• Journal of Periodontal and Implant Science
• /
• 제30권3호
• /
• pp.661-676
• /
• 2000

Gingivitis and periodontitis are infectious diseases in that microorganisms are the primary extrinsic cause of the diseases. the occurrence of gingivitis has been associated clearly with the presence of microorganisms at the disease site, and the histologic nature of the tissue involved is indicative of an inflammatory response induced by microorganisms. additional evidence for the microbial etiology of periodontal disease is that numerous antimicrobial agents are effective in reducing plaque accumulation and periodontal diseases. the purpose of this article is to analyze the antimicrobial effects of Pulsatilla koreana. Well-dried Pulsatilla koreana purchased from herbs distributor was ground and extracted into methanol(MeOH), ethylacetate(EtoAc), chlorform($CHCl_3$) and Butyl alcohol(BuOH). we have then applied each solution to the bacteria samples(Bacteroides forsythus, Streptococcus mutans, Streptococcus sanguis, Porphylomonas gingivalis, Actinobacillus actinomycetemcomitans, Eikenella corrodens, Prevotella intermedia, Actinomyces viscosus, Prevotella nigrescens , Rothia dentocariosa, Fusobacterium nucleatum, Pseudomonas aeruginosa, Staphylococcus aureus) collected from several organizations. To conduct susceptibility test(Kirby-Bauer method), plate contained each periodontopathic bacteria is spread extracted into methanol(MeOH), ethylacetate(EtoAc), chlorform($CHCl_3$) and Butyl alcohol(BuOH) and to measure the minimum inhibition concentration(MIC) of the bacteria against the solutions to ultimately determine antimicrobial effects of the solutions, insert bacteria sample into $20{\mu\ell}/{m\ell}$, $10{\mu\ell}/{m\ell}$, $5{\mu\ell}/{m\ell}$, $2.5{\mu\ell}/{m\ell}$ of each solution and control group(not contained solution) 1. Solution extracted into methanol did not show clear zone against all bacteria samples. Only P.nigrescens, S. mutans and S. sanguis in solution extracted into ethylacetate, S. mutans and S. anguis in solutions extracted into chlorform and Butyl alcohol showed clear zone against all bacteria samples. Solution extracted into Butyl alcohol showed clear zone against 13 types of bacteria, excluding P. gingivalis. 2. In Solution extracted into methanol, the bacteria samples grew in the highest concentrated plate, showing minimal variation from control group. 3. In Solution extracted into Butyl alcohol, S. aureus, P. intermedia, E. corrodens, A. actinomycetemcomitans, B. forsythus, P. gingivalis et al. showed decreased growth in the highest concentrated plate. P. auruginosa, R. dentocariosa, A. viscosus, P. nigrescens, S. mutans et al. showed decreased growth at MIC $20{\mu\ell}/{m\ell}$ and S. sanguis showed decreased growth at MIC $10{\mu\ell}/{m\ell}$. 4. By analyzing the MIC level through considering the results from Kirby-Bauer method, Solution extracted into methanol did not reveal any antimicrobial effects and Solution extracted into Butyl alcohol showed the highest antimicrobial effects In conclusion, it can be used the extracts of Pulsatilla koreana as wide spectrum antimicrobial agent.