• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전력기술부문
• /
• pp.137-139
• /
• 2003

Micro-Sources arc emerging as a providing environmentally friendly and reliable and effective solution. Micro-Source converter DC voltage of prime mover to AC voltage using voltage source inverter for interjecting with AC grid system. This paper studies optimal series inductance size for interjecting with AC grid system.

• 전력전자학회논문지
• /
• 제4권2호
• /
• pp.128-137
• /
• 1999

최근 전력전자기술 및 인버터 회로의 다양한 제어기법의 발달에 따라서 용접기 분야에서의 용접성능 향상에 관한 다양한 연구가 진행되고 있으며 특히{{{{ { CO}_{2 } }} 아크 용접기의 경우 용접성능을 좌우하는 스패터 발생을 최소화 하는 기법이 활발하게 연구되고 있다. 그러나 현재까지는 용접기의 출력전압을 정전압으로 제어하는 방식을 사용함에 따라 용접기의 금속이행과정을 임의로 제어하는 것이 불가능하였고, 특히 스패터가 다량으로 발생하는 저전류영역의 금속이행과정인 단락이행에서의 스패터 저감을 기대하기가 어려웠다. 따라서 본 논문에서는 마이크로프로세서를 이용한 인버터 출력전류의 파형제어기법을 사용하여 인버터 아크 용접기의 출력전류를 순시적으로 제어함에 의하여 스패터 저감, 단락주기의 안정화 및 순간단락현상 감소의 측면에서 용접성능을 개선위한 연구를 수행하였고 이상의 연구에 대한 결과를 제시하였고, 또한 인버터 아크 용접기의 AC/DC 전력변환장치로 SMR(Switched Mode Rectifier)를 사용하여 시스템을 단위역율로 운전하였으며 입력전류의 저차 고조파 억제효과를 얻을 수 있었다.

• 전력전자학회논문지
• /
• 제5권4호
• /
• pp.358-369
• /
• 2000

얇은 판형 용접에 광범위하게 사용되는 피복아크 용접기는 용접전원으로 변압기를 사용하는 AC 아크용접기외 인버터를 사용하는 인버터 아크 용접기로 구분된다. AC아크용접기는 변압기를 사용하므로 전체시스템의 부피 및 무게가 커지며 변압기 탭조정으로 인한 최적 출력전압이 설정되지 않아 용접성는이 저하되는 단침이 있다. 이러한 단점올 개선히고 용접성능을 향상시키기 위하여 고속반도체 소자를 이용한 인버터 아크용접기가 많이 연구되고 있다. 인버터 피복아크 용집기시스템은 다이오드 정류기, 인버터, 고주파 변압기, 출력측 정류기 및 리엑터로 구성되어져 있는데, 입력전원측에 다아오두 정류기를 사용함으로서 고조파 다량 힘유 및 입력역률 저하등을 가져오며, 일정 듀티를 갖는 정전압제어방식을 이용하고 아크용접시스템 고유의 정전류특성은 변압기의 누설구조애 의해 실현하고 았다. 따라서 본 논문에서든 이상의 단점을 해결하기 위하여 PWM 컨버터를 적용하여 입력측의 고조파를 제거하고 입력역률 99% 유지할 수 있었으며, 또한 새로운 혼형제어기법을 적용하여 순시적인 용접 출력전압과 전류를 제어하여 용접 출럭전압과 전류를 일정하게 유지시킴으로서 AC아크용접기와 비교하여 스패터룹 70%감소시켰으며 무부하시 10%의 효율 상승을 가져왔다.

• 대한전기학회논문지
• /
• 제36권9호
• /
• pp.655-659
• /
• 1987

This study presents a model of the electrical characteristics of the high-pressure mercury vapour arc discharge. Energy balance equation per unit volume of the arc tube is converted into the one per unit length by assuming the parabolic radial temperature distribution and integrating over the cross-section of the tube. Using this energy balance equation, together with the circuit equation and Ohm's law, the arc voltage and current variation for 1 cycle is numerically calculated and a good result is obtained. A simple method to calculate the axis temperature of the arc tube and the radiation output is also presented.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.585-590
• /
• 1999

The conventional $CO_2$ inverter arc machine has constant voltage output characteristic and uses constant wire speed controller for welding current control. By adoption of PWM inverter to the welding machine, the spattering was reduced rather than the thyrister arc welding machine or AC arc welding machine. Moreover, by the high switching frequency, the output reactor size could be reduced evidently. Recently, the studies on optimal voltage and current waveform for the welding performance improvement have been studied. In this paper, a new instantaneous output current control scheme during the short circuit mode was proposed and showed the capability of arc stability improvement and the reduction of spatter generation.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.554-555
• /
• 2005

In this paper, we analyzed a metallurgical structure and arc properties of copper wire when the over-current flows on electric wire. From the results, The fusing current was related to the fusing time(current rising rate per second). In case of the shorter the fusing time, the fusing current was high, and the fusing time of ac type was larger than that of dc type. The copper wire was bent by the increase of current and heated, the beads were scattered around wire with a flash. We could observed the dendrite structure in 'molten wire at ac and dc current type. According as the current rising rate per second is short, the dendrite structure is distributed in surface of wire.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.519-521
• /
• 1994

In this paper, the welding machine with high-frequency inverter is described, which can save energy more than conventional ones with low efficiency. Although for part of welding machine of special type such as MIG, TIG, products were developed by inverter, but it is poor that applied to ordinary ac arc welding machine. Difference between conventional AC arc welding machine and the proposed welding machine is investigated econimically and constructionally. Untill now, kinds of welding machine and its characteristics were also described. The comparison of the proposed welding machine and the conventional is presented in the way of output control.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1465_1466
• /
• 2009

Power cable of an AC arc welder can surround a body of worker at the moment of welding. Applying the boundary element method, we calculated current densities induced in organs inside a worker in case he weared a multi-layer shielding cloth. We know these were lowest when high permeability materials such as silicon and permalloy were applied to the interior of a suit and high conductivity materials such as copper were to the exterior.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권6호
• /
• pp.729-735
• /
• 2007

AC cold arc welding process with AWS E Ni-CI and NiFe-CI is sometimes used to repair damaged cast iron parts in diesel engine room. But if some difference in hardness on welding zones, repaired parts would be cracked in a short. To overcome this default. this study is performed on varying preheating temperature of welding parts, selecting welding rod etc. Experimental results showed that difference in hardness on welding zones at $200^{\circ}C$ was less than $100^{\circ}C$ and less low current than high current. From this study we could conclude that repair welding at $200^{\circ}C$ preheating and low current as possible as welding in damaged cast iron parts was a little difference in hardness on welding zones.

• 전기학회논문지
• /
• 제66권11호
• /
• pp.1647-1650
• /
• 2017

Bus bars are used in place of cables because they can carry more electrical energy with the same volume of conductors. This paper deals with the electrical properties of ceramic coating material for busbars. A ceramic coated samples were prepared for the electrical properties test. There are two types of samples. One is a sample without degradation, and the other is a sample degraded for 30 days. Four electrical properties tests were carried out in accordance with domestic standards. Four electrical characteristics tests are AC dielectric breakdown, V-t, lighting impulse dielectric breakdown, and discharge arc. Both samples showed excellent electrical properties, and the ceramic coating material is very good insulating materials for bus bar.