• Clinical and Experimental Pediatrics
• /
• v.62 no.6
• /
• pp.206-212
• /
• 2019

Purpose: The present study aimed to determine the prevalence of childhood obesity and overweight in Iranian children under 5 years of age using a systematic review and meta-analysis. Methods: We searched MEDLINE (PubMed), Web of Science, Google Scholar, Scopus, CINHAL, and the Iranian databases, including Scientific Information Database (www.sid.ir), Iranian Research Institute for Information Science and Technology (Irandoc.ac.ir), Iranmedex (www.iranmedex.com), and Magiran (www.magiran.com), for all articles published between January 1989 and August 2017. Sources of heterogeneity were determined using subgroup analysis and meta-regression. Results: Six articles were ultimately included in the meta-analysis to estimate the pooled prevalence, based on which the prevalence of obesity and overweight were estimated to be 8% (95% confidence interval [CI], 6%-10%) and 9% (95% CI, 7%-11%), respectively. The results of the subgroup analysis showed that the prevalence of obesity in boys and girls was 9% (95% CI, 6%-13%) and 7% (95% CI, 4-10%), respectively, and the prevalence of overweight in boys and girls was 10% (95% CI, 5%-15%) and 9% (95% CI, 5%-13%), respectively. Conclusion: Despite high heterogeneity among the results of the articles included in the meta-analysis, the prevalence of obesity and overweight is higher in Iranian children under 5 years of age. Therefore, parents and the health system must pay more attention to the lifestyle, nutritional habits, and physical activity of these children.

• Korean Journal of Materials Research
• /
• v.29 no.8
• /
• pp.469-476
• /
• 2019

A lead-free bulk ceramic having a chemical formula $Ba_{0.8}Ca_{0.2}(Ti_{0.8}Zr_{0.1}Ce_{0.1})O_3$ (further termed as BCTZCO) is synthesized using mixed oxide route. The structural, dielectric, impedance, and conductivity properties, as well as the modulus of the synthesized sample are discussed in the present work. Analysis of X-ray diffraction data obtained at room temperature reveals the existence of some impurity phases. The natural surface morphology shows close packing of grains with few voids. Attempts have been made to study the (a) effect of microstructures containing grains, grain boundaries, and electrodes on impedance and capacitive characteristics, (b) relationship between properties and crystal structure, and (c) nature of the relaxation mechanism of the prepared samples. The relationship between the structure and physical properties is established. The frequency and temperature dependence of the dielectric properties reveal that this complex system has a high dielectric constant and low tangent loss. An analysis of impedance and related parameters illuminates the contributions of grains. The activation energy is determined for only the high temperature region in the temperature dependent AC conductivity graph. Deviation from the Debye behavior is seen in the Nyquist plot at different temperatures. The relaxation mechanism and the electrical transport properties in the sample are investigated with the help of various spectroscopic (i.e., dielectric, modulus, and impedance) techniques. This lead free sample will serve as a base for device engineering.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.26 no.3
• /
• pp.192-198
• /
• 2021

The battery's State of Health (SOH) is a critical parameter in the process of battery use, as it represents the Remaining Useful Life (RUL) of the battery. Electrochemical Impedance Spectroscopy (EIS) is a widely used technique in observing the state of the battery. The measured impedance at certain frequencies can be used to evaluate the state of the battery, as it is intimately tied to the underlying chemical reactions. In this work, a low-cost portable EIS instrument is developed on the basis of the ARM Cortex-M4 Microcontroller Unit (MCU) for measuring the impedance spectrum of Li-ion battery packs. The MCU uses a built-in DAC module to generate the sinusoidal sweep perturbation signal. Moreover, it performs the dual-channel acquisition of voltage and current signals, calculates impedance using a Digital Lock-in Amplifier (DLA), and transmits the result to a PC. By using LabVIEW, an interface was developed with the real-time display of the EIS information. The developed instrument was suitable for measuring the impedance spectrum of the battery pack up to 1000 V. The measurement frequency range of the instrument was from 1 hz to 1 Khz. Then, to prove the performance of the developed system, the impedance of a Samsung SM3 battery pack and a Bexel pouch module were measured and compared with those obtained by the commercial instrument.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.32 no.3
• /
• pp.209-220
• /
• 2022

Objectives: This study was performed to suggest how to re-establish criterion for toxic substances under the Chemical Control Act (CCA) in South Korea by comparing the GHS (Globally Harmonized System of Classification and Labeling of Chemicals) score and toxic properties. Methods: Toxic substances were classified into seven groups (Acute toxicity (1A), Chronic toxicity (2C), Environmental hazards (3E), Acute toxicity & chronic toxicity (4AC), Chronic toxicity & environmental hazards (5CE), Acute toxicity & environmental hazards (6AE), and Acute toxicity & chronic toxicity & environmental hazards (7ACE)) according to their toxic properties. The GHS score was calculated to sum up five toxicity indicators (health acute toxicity, health repeated toxicity, carcinogenicity, health other chronic toxicity and environmental hazards). Results: The GHS score of 7ACE was higher by 7 times that of 1A. 1A is the only group which has lower than the total GHS score. The highest score was 47, for sodium chromate (CAS no. 7775-11-3), which belongs to group 7ACE. This is classified as acute toxicity, carcinogenicity, germ cell mutagenicity, reproductive toxicity, and acute and chronic environmental hazard. On the other hand, the lowest score was 2.75, which was assigned to 177 chemicals belonging to group 1A. When the health acute toxicity indicator was omitted from the toxic criterion, toxic substances could be divided into the sub-groups 'human chronic hazards group' (HCG) and 'environmental hazards group' (EG) according to their GHS score and properties. Conclusions: The proposed criterion for toxic substances is to establish sub-groups defined as HCG and EG for separate control and that the 1A group be moved to substances requiring preparation for accidents under the CCA.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.2
• /
• pp.279-290
• /
• 2022

A superconducting fault current limiter(SFCL) is a power device that exploits superconducting transition to control currents and enhances the flexibility, stability and reliability of the power system within a few milliseconds. With a high phase transition speed, high critical current densities and little AC loss, high-temperature superconducting (HTS) wires are suitable for a resistive-type SFCL. However, HTS wires due to the lack of optimization research are rather inefficient to directly apply to a fault current limiter in terms of the design and capacity, for the existing method relied the characteristics. Therefore, in order to develop a suitable wire for an SFCL, it is necessary to enhance critical current uniformity, select optimal stabilizer materials and conducted research on the development of uniform stabilizer layering technology. The high temperature superconducting wires manufactured by this study get an average critical current of 804 A/12mm-width at the length of 710m; therefore, conducted research was able to secure economic performance by improving efficiency, reducing costs, and reducing size.

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.178-180
• /
• 2020

기존의 철도차량용 무선전력전송 시스템은 Medium-voltage (MV) 60 Hz 중전압 AC 계통 전압을 Low-voltage (LV) DC로 변환하기 위해 저주파 변압기와 정류기를 사용한다. 하지만 수 MW급의 대전력을 낮은 DC 전압으로 전송하려면 인버터는 수백 A - 수 천 A 이상의 전류용량을 가져야하므로 정류기의 출력 단에 직렬 또는 병렬로 연결된 여러 개의 고주파 변압기를 필요하게 된다 (그림 1참조). 이러한 저주파 변압기, 정류기 및 고주파 변압기는 크고 무거우므로 낮은 전력밀도 및 높은 시스템 가격의 원인이 된다. 본 논문에서는 이러한 저주파변압기, 정류기, 고주파 변압기를 사용하지 않는, 여자 코일을 이용한 새로운 멀티레벨 무선전력전송 시스템의 토폴로지를 제안한다. 제안된 멀티레벨 무선전력전송 시스템은 멀티레벨 인버터의 각 출력 단에 여자코일 (excitation coil) 이 연결되어 있다. 이 여자코일들은 급전코일 (transmitter coil) 에 전기적으로는 절연되었지만 자기적으로 강하게 결합된다. 여자코일들이 발생시킨 자기장은 급전코일에 유도전압을 발생시키고, 급전코일에서 수백 A 이상의 큰 전류를 흐르게 하여 급전코일에서 강한 자기장을 발생하도록 한다. 이 자기장은 급전코일과 수 cm 이상 떨어져 자기적으로 약하게 결합된 집전코일 (receiver coil) 에 다시 유도전압을 발생시켜 전력을 전달하게 된다. 제안한 새로운 멀티레벨 무선 전력 전송 시스템은 시뮬레이션을 통해 검증했다.

• Particle and aerosol research
• /
• v.19 no.3
• /
• pp.63-76
• /
• 2023

An electrostatic precipitator (ESP) has a low pressure drop and a high collection efficiency but its collection efficiency can be reduced due to dust accumulation on the collection plates during long-term operations. In order to maintain the initial dust collection efficiency, it is necessary to periodically clean the collection plates. The common cleaning methods are using physical impacts or water sprays. These cleaning methods can lead to damage to the collection plate or generate wastewater. Herein, we implemented an electrodynamic screen (EDS) for ESP cleaning and evaluated its surface cleaning performance of particles. The EDS is an electrostatic system that can electrostatically repel particles on surfaces, allowing it to clean the ESP without causing damage and wastewater generation. Our evaluation included the analysis of the effects of AC voltage characteristics, electrode configuration and environmental conditions on the cleaning performance of the EDS with the aim of achieving effective surface cleaning. It has been demonstrated that activating the EDS cleans up to 65% of the particles on the surface, which indicates about 94% of our target cleaning zone.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.36 no.3
• /
• pp.257-265
• /
• 2000

Brushless DC(BLDC) motors are widely used as AC servo motors in factory automation fields because of their quick instantaneous mobility, good energy saving efficiency and easiness of design for control system comparing with induction motors. Recently, a Two-Degree-of-Freedom(2DOF) PI control law has been adopted to some application parts to accomplish an advanced speed control of BLDC motors. The method can treat the two conflicting performances, minimum tracking errors versus reference inputs without large overshoot and rejection of some disturbances including modeling errors, independently. However, the method can not design the optimal system which is able to minimize tracking errors and energy consumption simultaneously. In this paper, a 2DOF integral type optimal servo control method is investigated to promote the speed control performances of BLDC motors considering energy consumption. In order to applicate the method to the speed servo system of the BLDC motor, the motor is modeled in the state space using the vector control and decoupling technique. To verify the validity of the suggested method, some simulations and experiments are performed.

• Journal of Korean Academy of Nursing
• /
• v.24 no.4
• /
• pp.696-705
• /
• 1994

This study was done to provide a basis for home health care management for women following Cesarean delivery. Furthermore it was initiated as an possible application of home health care in the future. In this study, client selection criteria was developed by the researcher and assessment tools for home health care, recording system and problem oriented recording system were revised from Jun's(1993) methods. The selection criteria tool for home health care for women who had a Cesarean delivery was structured and consisted of five areas : physical status, functional status, psychological-emetional status, educational needs status and environmental status. The structured assessment tool consisted of general items, obstetric history, past medical history, methods of feeding, medications taken before ad-mission, laboratory results, discharge instructions, discharge medications, family tree, economic status, environmental status, a map, health assessment of women and their newborns. The visit note consisted of the date : nursing problems : nursing process including initial assessment : nursing goals : visit plan : health status of the postpartum women and their newborn : nursing diagnoses : nursing implementation evaluation : summary : next visit plan and revision. The problem oriented recording system consisted of the date, problem numbers, nursing diagnoses, problem appearance date, problem resolution date. The results of the research are as follows : The seven cases having had a Cesarean delivery were discharged on an average on the 5th day after the Cesarean birth. The total number of home visits was 13. According to Cordon's functional health patterns the total possible nursing diagnoses was 34 diagnoses for the methers and their newborns. Among the 34 diagnoses, there were 13 diagnoses in the health perception /management pattern, 7 in the psychosocial health perception / management pattern, 8 in the psychosocial self-perception, 2 in the nutrition / metabolism pattern of physical function, 2 in the knowledge deficit of newborn management, anxiety related to newborn management, knowledge deficit related to disease process of new-born, anxiety related to disease process of newborn anxiety related to prognosis of baby's condition, knowledge deficit related to newborn jaundice each appeared once. The changes in the number of nursing diagnoses was related to not the number of visits but to the number of nursing diagnoses decreasing. The con-tent of the home health care was categorized ac-cording to assessment, direct care, counseling, education, family care. The recommendation based on the results of this research are Home health care nurses for Cesarean postpartum women and their neonates requires comprehensive knowledge of pregnancy, delivery, and the postpartum period and of the neonate so that they can provide appropriate care and holistic views. Most of cases terminated after the second visit, this outcome may be related to the subjects being discharged on the 5th day after delivery. Therefore, study done with earlier discharge after delivery may have different outcome. It is very hard to assess psychological aspects that need follow-up and to develop communication channels.

• Korean Journal of Acupuncture
• /
• v.27 no.3
• /
• pp.129-142
• /
• 2010

Background : The Bonghan theory is a hypothesis on the anatomical structure of the acupuncture point and meridian system. It has been regarded as a misunderstanding of the lymphatic system, or as a made-up story, for the past 40 years. Since 2002, Many studies have been published either to support the theory or to refute the old viewpoint. Objective : The purpose of this study was to find out the validity of the refutation by reviewing the publications. Methods : Searches were made from online databases (Riss4u.net, Google.com, Sciencedirect.com, Pubmed.com, baidu.com, and ci.nii.ac.jp) from 1960 to 2009. The search terms that were used were "Bonghan," "Bong han," "봉한," "thread-like structure," "KИM БOH XaHOM", "CИCTEMA KEHPAK," "鳳漢," "鳳漢管," and "鳳漢学說." References from the searched publications were also used. Results : Since the 1960s, 107 publications were identified as related works, but only 11 publications sought to refute the Bonghan theory. Two publications were researches, and nine were reviews. In the analysis of the correlation of the arguments with the publication contents, it was found that the research of G. Kellner reviewed the Bonghan system properly but that V. V. Kosmatov did not classify the ear-reflex zone as a traditional acupuncture point. For the review publications, only two reviews contained proper arguments, but seven publications were identified as broad interpretations, wrong translations, etc. Moreover, the two proper reviews were grounded on the research of G. Kellner. Conclusions : We found that the scientific origin of the refutation of the Bonghan theory is only one research by G. Kellner. This result suggest that Bonghan theory was not discussed enough to determine the invention.