• Design & Manufacturing
• /
• 제2권2호
• /
• pp.33-37
• /
• 2008

This paper describes the optimization of injection molding conditions to minimize sink marks. Sink marks, which refer to a small depression on the surface opposite a thick wall thickness, are often encounted in injection molded plastic parts. Part geometry, material properties and processing conditions during injection molding can affect the sink mark depth. We designed the runner system which is possible balanced filling to cavities using CAE program and then obtained optimal processing conditions by Taguchi's Robust Design technique. By actual injection molding using optimized mold and molding conditions, it confirmed that sink mark depth decreased zero compared to 1mm level in the conventional mold and process.

• 한국정밀공학회지
• /
• 제25권7호
• /
• pp.111-115
• /
• 2008

This paper describes the optimization of injection molding conditions to minimize sink marks. Sink marks, which refer to a small depression on the surface opposite a thick wall thickness, are often encounted in injection molded plastic parts. Part geometry, material properties and processing conditions during injection molding can affect the sink mark depth. We designed the runner system which is possible balanced filling to cavities using CAE program $Moldflow^{TM}$ and then obtained optimal processing conditions by Taguchi's Robust Design technique. By actual injection molding using optimized mold and molding conditions, it confirmed that sink mark depth decreased zero compared to 1mm level in the conventional mold and process.

• International Journal of Korean Welding Society
• /
• 제2권1호
• /
• pp.57-61
• /
• 2002

This paper presents development of a SEC(Solar Energy Concentration) utilizing the concentrated solar beam radiation for joining engineering thermoplastics such as Acrylonitrile/Butadiene/Styrene(ABS), Polycarbonate(PC) and Polymethylmethacrylate (PMMA). In addition, to study the joining of the materials, necessary experimentation with applying primer was performed. Tensile tests were conducted to determine the bond strength achieved at the specimen Joint interface. Microscopic examinations of the fractured joints were performed in order to analyze the overall bond quality. Finally, the results in terms of bond strength achieved at the joint interface and energy consumed in the process was compared with those obtained with similar thermoplastic joining technique utilizing microwave energy.

• 전자공학회논문지 IE
• /
• 제43권4호
• /
• pp.122-127
• /
• 2006

무전해 도금법을 이용하여 고분자섬유의 형태를 가진 전도성 필러를 제조하였다. 나일론 6과 레이온 섬유 분체에 니켈과 구리를 도금한 복합 전도성 필러를 제조하였다. 입도 분석기를 이용하여 필러의 입자크기분포를 측정하였으며, 전도성 필러의 전도성을 측정하기 위해 전도성 분석기를 이용하였으며, 본 연구의 전도성 필러와 유사한 용도로 사용되는 탄소섬유의 전도성을 측정하여 전도성의 차이점을 비교하였다. ABS 수지에 제조된 전도성 필러를 주입하여 필름을 만들어서 1MHz$\sim$1GHz 주파수 대역에서 전자파 차폐 특성을 측정하였다. 제조된 전도성 필러가 첨가된 필름의 전자기파 차폐 특성을 측정하기 위하여 ASTM(D4935-89) 규격의 플랜지형 동축전송선 측정기구를 사용하였다. 제조된 전도성 필러는 기존의 탄소계 필러에 비해 전도성이 커서 전자파 차폐용 재료로 적합하였다.

• 대한조선학회논문집
• /
• 제47권6호
• /
• pp.843-849
• /
• 2010

This paper presents definition of symmetry of a ship section where three symmetries are proposed: material, geometric, and load symmetries. Precise terminologies of centroid, moment plane, and neutral axis plane are also defined. It is suggested that force vector equilibrium as well as force equilibrium are necessary condition to determine new position of neutral axis due to translational and rotational mobility. It is also stated that new reference datum of ENMP(elastic neutral moment plane), PNMP(fully plastic moment plane), ENAP(elastic neutral axis plane), and INAP(inelastic neutral moment plane) are required to define asymmetric section properties such as second moment of area, elastic section modulus, yield moment, fully plastic moment, and ultimate moment. Since collision-induced damage and flooding-induced biaxial bending moment produce typical asymmetry of section, the section properties are calculated for a typical VLCC. Geometry asymmetry is determined from ABS and DNV rules and two moment planes of 0/30 degs are assumed for load asymmetry. It is proved that the property reduction ratios directly calculated from second moment of area are usually larger than area reduction ratio. Reduction ratio of ultimate moment capacity shows almost linearly proportional to area reduction ratio. Mobility of elastic and inelastic neutral axis planes is visually provided.

• 한국지능시스템학회논문지
• /
• 제26권6호
• /
• pp.477-484
• /
• 2016

선풍기, 오디오, 전기밥솥 등의 소형 산업가전제품들은 대부분 ABS, PP, PS 등의 재질로 이루어져 있다. 색깔이 있는 플라스틱은 근적외선(NIR) 분광기에 의해 분류가 가능하지만, 반면에 검은색 플라스틱은 빛을 흡수하는 특성으로 인해 분류하기가 어렵다. 그래서 본 연구에서는 LIBS(Laser Induced Breakdown Spectroscopy) 분광기를 통해 폐소형가전 플라스틱을 선별하는 RBFNNs(Radial Basis Function Neural Networks) 패턴 분류기를 소개한다. 전처리부분에는 차원축소 알고리즘 중 하나인 PCA(Principal Component Analysis)를 사용해 처리 속도를 향상시킬 뿐만 아니라 효과적인 데이터의 특성을 추출한다. 조건부에는 FCM(Fuzzy C-Means) 클러스터링을 사용한다. 결론부에는 다항식의 형태 중 하나인 1차 선형식을 연결가중치로서 사용한다. PSO와 5-fold cross validation은 성능의 신뢰도를 향상시키고, 분류율을 높이는데 사용된다. 제안된 분류기의 성능은 최적화한 것과 최적화하지 않은 것 두 가지의 관점에서 보여준다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제19권1호
• /
• pp.61-69
• /
• 1997

The submandibular gland is one of the major salivary glands, salivary diseases frequently occuring site due to its anatomical weakness. This retrospective study evaluated data pertaining to history, sex, operation method, age distribution, diagnosis through the chart, operation record, radiographs, histologic finding of 51 patients operated on for the submandibular gland excision from 1986 to 1995 in our hospital so that we improve on the understand of the salivary gland diseases. The results were as follows ; 1. The chief complaints was mass, swelling mainly. 2. The ratio of affected site was 47.1 : 51 in left : right respectly, both sites was 1 case especially. 3. The ratio of men to women was 56.9 : 43.1 4. The operation performed all through the extraoral approach. 5. The sialolith presented at 24 cases. 6. The most patients had a two weeks duration period. 7. The age distribution was the third decade(29.4%), the second decade(27.5%) in order. 8. The symptoms accompanied the chief complaints was pain(37.3%), mass(17.6%), swelling(13.7%), trismus(13.7%) in order. 9. The diagnosis was sialadenitis with stone(S.W.S.) (45.1%), sialadenitis without stone(S.W.O.S.) (17.6%), pleomorphic adenoma(P.A.) (15.7%), abscess(Abs) (5.9%), tuberculosis(Tbc) (5.9%) in drder.

• 대한기계학회논문집A
• /
• 제29권5호
• /
• pp.689-697
• /
• 2005

This paper presents the reliability estimation of door hinge for home appliances, which consists of bushing and shaft. The predominant failure mechanism of bushing made of polyoxymethylene(POM) is brittle fracture due to decrease of strength caused by voids existing, and that of shaft made of acrylonitrile-butadiene-styrene(ABS) is creep due to plastic deformation caused by excessive temperature and lowering of glass transition temperature by absorbed moisture. Since the brittle fracture of bushing is overstress failure mechanism, the load-strength interference model is used to estimate the failure rate of it along with failure analysis. By the way, the creep of shaft is wearout failure mechanism, and an accelerated life test is then planned and implemented to estimate its lifetime. Through the technical review about failure mechanism, temperature and humidity are selected as accelerating variables. Assuming Weibull lifetime distribution and Eyring model, the life-stress relationship and acceleration factor, $B_{10}$ life and its lower bound with $90\%$ confidence at worst case use condition are estimated by analyzing the accelerated life test data.

• 대한기계학회논문집A
• /
• 제25권5호
• /
• pp.816-822
• /
• 2001

The thermoforming process is widely used in the plastics industry to produce articles for the packaging, automotive, domestic construction and leisure industries. The microcellular foaming process appeared at M.I.T. in 1980s to save a quantity of polymer materials and increase their mechanical properties. The glass transition temperature of polymer materials is one of many important process variables in appling the microcellular foaming process to the conventional thermoforming process. The goal of this research is to evaluate the relation between gas absorption and glass transition temperature in batch process using microcellular foaming process. The weight gain ratio of polymer materials has a conception of gas absorption. Polymers such as acrylonitrile-butadiene-styrene(ABS), polystyrene(PS) have been used in this experiment. According to conventional Chows model and Cha-Yoon model, it was estimated with real experimental result to predict a change of glass transition temperature as a function of the weight gain ratio of polymer materials in batch process to gain microcellular foamed plastic products.

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2004년도 정기학술대회
• /
• pp.303-311
• /
• 2004

This paper presents the reliability estimation of door hinge for home appliances, which consists of bushing and shaft. The predominant failure mechanism of bushing made of polyoxymethylene(POM) is brittle fracture due to decrease of strength caused by voids existing, and that of shaft made of acrylonitrile-butadiene-styrene(ABS) is creep due to plastic deformation caused by excessive temperature and lowering of glass transition temperature by absorbed moisture. Since the brittle fracture of bushing is overstress failure mechanism, the load-strength interference model is used to estimate the failure rate of it along with failure analysis. By the way, the creep of shaft is wearout failure mechanism, and an accelerated life test is then planned and implemented to estimate its lifetime. Through the technical review about failure mechanism, temperature and humidity are selected as accelerating variables. Assuming Weibull lifetime distribution and Eyring model, the life-stress relationship and acceleration factor, B$_{10}$ life and its lower bound with 90% confidence at worst case use condition are estimated by analyzing the accelerated life test data.a.