• 한국안전학회지
• /
• 제27권4호
• /
• pp.38-42
• /
• 2012

This paper describes electrical fire on residential environment such as apartment and detached house caused by defect of interior wiring. We carried out experimental study on short circuit characteristics by the interior wiring length. We were measured arc current, arc energy and interrupting time of earth leakage current circuit breaker(ELB), when an interior wiring break out short circuit in residential environment. From the experiment results, the longer of the interior wiring, the magnitude of arc current decreased and the interrupting time of ELB increased. When applied the A maker's ELB, the strength of arc current and interrupting time of ELB was 254 A and 245 ms respectively at 30 m interior wiring length. In 3 m interior wiring length, arc current and interrupting time was 716 A and 4.24 ms respectively. Arc energy was dependent on the magnitude of arc current and the interrupting time of ELB, the longer the interrupting time, arc energy increasing. In this paper, minimum arc energy was 277 J using C maker's ELB and 3 m interior wiring length(arc current 283 A, interrupting time of breaker 6.28 ms). Therefore in the residential environment, short circuit caused by defect of the interior wiring lead to electrical fire.

• 터널과지하공간
• /
• 제12권4호
• /
• pp.277-283
• /
• 2002

본 연구는 안쪽축이 회전하고 바깥쪽 실린더는 정지해있는 반경비가0.52이고 30$^{\circ}$ 경사진 동심 환형관내의 헬리컬 유동 특성에 관한 것이다. 비뉴튼 유체인 UC 수용액과 벤토나이트 수용액을 사용하여 안쪽축이 0~400pm으로 회전할 때 축방향 유동을 완전히 발달시킨 후 축방향 압력손실값을 측정하였다. 또한, 헬리컬 유동의 가시화는 불안정한 파를 관찰하기 위해 수행되었다. 현재 연구 결과는 표면마찰계수에 대해 로스비순(Ro)와 레이놀즈수(Re)의 관계를 나타내었다. 또한, 그 결과들은 유동 불안정성 메카니즘의 존재를 보인다. 축회전수가 증가함에 따라 압력손실이 증가하지만, 그 증가폭은 천이 및 난류영역에서는 레이놀즈수가 증가할수록 감소하며, 회전의 영향으로 유동교란이 증진되어 천이가 촉진된다. 또, 이런 유동교란의 증진은 표면마찰계수값의 증가와 함께 임계 레이놀즈수(Re$_{c}$)를 작게 만든다.

• 한국식품영양과학회지
• /
• 제44권6호
• /
• pp.921-927
• /
• 2015

본 실험은 사출구 온도와 반복 압출성형이 백삼압출성형물의 물리적 특성에 미치는 영향을 분석하였다. 압출성형 조건은 수분 함량 20%와 스크루 회전속도 200 rpm을 고정시키고 독립변수로서 사출구 온도 $100^{\circ}C$, $120^{\circ}C$, $140^{\circ}C$로 1회, 2회 반복 압출성형 실험을 하였다. 비기계적 에너지 투입량은 사출구 온도 $140^{\circ}C$에서 1회 압출성형물이 295.0 kJ/kg으로 가장 낮게 측정되었다. 조직감 특성 중 탄성계수에서는 사출구 온도 $100^{\circ}C$에서 2회 압출성형물이 $7.53{\times}10^8N/m^2$로 가장 높게 측정되었으며, 사출구 온도 $120^{\circ}C$에서 1회 압출성형물이 $1.78{\times}10^8N/m^2$로 가장 낮은 결과값을 나타냈다. 또한 파괴력은 사출구 온도 $100^{\circ}C$에서 2회 압출성형물이 $7.49{\times}10^5N/m^2$로 가장 높게 측정되었으며, 사출구 온도 $140^{\circ}C$에서 2회 압출성형물이 $1.33{\times}10^5N/m^2$로 가장 낮게 측정되었다. 팽화 특성에서 $120^{\circ}C$ 1회 백삼압출성형물의 직경팽화율이 $2.283{\pm}0.011$로 가장 높게 측정되었으며, 비길이 체적밀도에서는 사출구 온도 $140^{\circ}C$에서 1회 압출성형물과 사출구 온도 $100^{\circ}C$에서 2회 백삼압출성형물이 각각 $123.790{\pm}2.802m/kg$, $0.260{\pm}0.020g/cm^3$로 가장 높게 측정되었다. 수분흡착지수(WAI)와 수분용해지수(WSI)는 백삼압출성형물 모두 백삼분말보다 증가하였다. WAI는 1회 압출성형을 하였을 때 증가하였으며, 2회 압출성형을 하였을 때는 감소하였다. 또한 사출구 온도가 증가할수록 WAI도 증가하였다. WSI의 경우 WAI와 반대로 사출구 온도가 증가하면 감소하는 경향이 나타났다. 위 연구를 통하여 백삼의 압출성형 조건을 달리하여 물리적 특성의 향상과 새로운 백삼제품 및 소재의 개발 가능성을 확인할 수 있었다.

• 한국식품과학회지
• /
• 제28권4호
• /
• pp.696-701
• /
• 1996

참치통조림 업계에서 부산물로 얻어지는 자숙액을 효율적으로 이용하기 위해 효소가수분해하여 분말엑기스를 제조하고 제조된 분말엑기스의 정미성분을 검토하였다. 두부와 내장을 제거한 2kg이하의 참치 2.3톤을 $93-95^{\circ}C$에서 45분간 증자하여 유출되는 약 $6^{\circ}brix$의 자숙액을 효소처리(pH; 6.19, 온도; $50^{\circ}C$, 효소농도; 0.5%, 처리시간; 1시간)하였다 이를 $80-85^{\circ}C$에서 5분간 처리하여 효소를 실활시키고 활성탄을 가하여 감압, 여과한 다음 이 여액 500ml 분무건조하여 백색의 분말엑기스 18 g을 얻었다. 이 분말엑기스의 유리아미노산 함량은 2,711.5 mg/100g이었고 이중 taurine이 19.4%를 차지하여 가장 많았고 다음으로 glutamic acid (13.8%), phenylalanine (11.7%) 및 alanine (10.5%)의 순으로 많았다. 이들 4종의 아미노산이 전체 유리 아미노산의 55.4%를 차지하였다. 한편 구성 아미노산의 함량은 30,758.1 mg/100g이었으며 이중 glutamic acid가 13.1%로 가장 많았다. 핵산관련물질 중에서는 inosine이 $76.29\;{\mu}mole/g$으로서 양적으로 가장 많았다. 엑기스 질소중 양적으로 가장 많은 것은 핵산관련물질 질소로 전 엑스분 질소의 41.2%를 차지하였으며 다음으로 유리 아미노산 질소의 순이었다. TMAO와 TMA는 미량 존재하였으며, betaine은 72.2 mg/100g으로서 전엑스분 질소의 4.9%를 차지하였고, 총 creatinine은 전엑스분 질소의 3.5%을 차지하였다 omission test 결과 분말엑기스의 맛에는 유리 아미노산, 유기산, 핵산관련물질의 순으로 기여도가 높았고, 유리 아미노산은 지미의 주된 물질임과 동시에 자극성의 맛이나 신맛을 완화시키는 역할을 하는 것으로 판단되었다.

• Journal of Pharmaceutical Investigation
• /
• 제28권4호
• /
• pp.283-288
• /
• 1998

Lovastatin, one of the potent cholesterol-lowering agents, is an inactive lactone prodrug which is metabolized to its active open acid, lovastatin acid (LVA). Bioequivalence study of two lovastatin preparations, the test drug ($Mevacor^{\circledR}$: Chungwae Pharmaceutical Co., Ltd.) and the reference drug ($Lovaload^{\circledR}$: Chong Kun Dang Pharmaceutical Co., Ltd.), was conducted according to the guidelines of Korea Food and Drug Administration (KFDA). Fourteen healthy male volunteers, $23.9{\pm}3.9$ years old and $67.6{\pm}8.0$ kg of body weight in average, were divided randomly into two groups and administered the drug orally at the dose of 160 mg as lovastatin in a $2{\times}2$ crossover study. Plasma concentrations of lovastatin acid were analysed by HPLC method for 12 hr after administration. The extent of bioavailability was obtained from the plasma concentration-time profiles of total lovastatin acid after alkaline hydrolysis of the plasma samples. By alkaline hydrolysis, trace amounts of unmetabolized lovastatin were converted to lovastatin acid. The $AUC_{0-12hr}$ was calculated by the linear trapezoidal rule method. The $C_{max}$ and $T_{max}$ were compiled directly from the plasma drug concentration-time data. Student's t-test indicated no significant differences between the formulations in these parameters. Analysis of variance (ANOVA) revealed that there were no differences in AUC, $C_{max}$, and $T_{max}$ between the formulations. The apparent differences between the formulations were far less than 20% (e.g., 7.07, 5.77 and 1.18% for AUC, $C_{max}$, and $T_{max}$, respectively). Minimum detectable differences(%) between the formulations at ${\alpha}=0.05$ and $1-{\beta}=0.8$ were less than 20% (e.g., 17.2, 15.1, and 15.9% for AUC, Cmax, and Tmax, respectively). The 90% confidence intervals for these parameters were also within ${\pm}20%$ (e.g.. $-5.20{\sim}19.3$, $-5.00{\sim}16.5$, and $-10.2{\sim}12.5%$ for AUC, $C_{max}$, and $T_{max}$, respectively). These results satisfied the bioequivalence criteria of KFDA guidelines, indicating that the two formulations of lovastatin were bioequivalent.

• 한국통신학회논문지
• /
• 제30권4C호
• /
• pp.283-289
• /
• 2005

본 논문에서는 공간-주파수 OFDM (SF-OFDM) 전송 다이버시티 기법을 위한 효율적인 심볼 검출 알고리즘이 제안되었다. SF-OFDM 전송 다이버시티 기법에서 부반송파의 수가 적은 경우 부채널간 간섭이 발생하게 되며, 이러한 간섭은 다이버시티 시스템의 성능을 크게 저하시킨다. 제안된 알고리즘은 부채널간 간섭을 병렬 혹은 순차적으로 제거함으로써 기존 알고리즘에 비해 큰 성능 이득을 얻는다. 컴퓨터 모의실험을 통한 비트오류율 (BER) 성능 평가 결과. 두개의 송수신 안테나를 사용하는 경우, $10^{-4}$의 BER에서 약 3 dB의 성능 이득을 얻을 수 있음을 확인하였다. 제안된 알고리즘이 적용된 심볼 검출기는 하드웨어 설계 언어를 통해 설계되었고, $0.18{\mu}m$ 1.8V CMOS 표준 셀 라이브러리를 이용하여 합성되었다. 제시된 하드웨어 구조와 함께 설계된 SF-OFDM-PIC 심볼 검출기는 약 140K개의 논리 게이트로 구성되었고, SF-OFDM-SIC 검출기는 129K개의 논리 게이트로 합성되었다.

• BMB Reports
• /
• 제43권10호
• /
• pp.704-709
• /
• 2010

The Swedish mutation (K595N/M596L) of amyloid precursor protein (APP-swe) has been known to increase abnormal cleavage of cellular APP by Beta-secretase (BACE), which causes tau protein hyperphosphorylation and early-onset Alzheimer's disease (AD). Here, we analyzed the effect of APP-swe in global gene expression using deep transcriptome sequencing technique. We found 283 genes were down-regulated and 348 genes were up-regulated in APP-swe expressing H4-swe cells compared to H4 wild-type cells from a total of approximately 74 million reads of 38 base pairs from each transcriptome. Two independent mechanisms such as kinase and phosphatase signaling cascades leading hyperphosphorylation of tau protein were regulated by the expression of APP-swe. Expressions of catalytic subunit as well as several regulatory subunits of protein phosphatases 2A were decreased. In contrast, expressions of tau-phosphorylating glycogen synthase kinase $3\beta$(GSK-3$\beta$), cyclin dependent kinase 5 (CDK5), and cAMP-dependent protein kinase A (PKA) catalytic subunit were increased. Moreover, the expression of AD-related Aquaporin 1 and presenilin 2 expression was regulated by APP-swe. Taken together, we propose that the expression of APP-swe modulates global gene expression directed to AD pathogenesis.

• Advances in Energy Research
• /
• 제1권1호
• /
• pp.1-12
• /
• 2013

In this work, we present the catalytic dehydrogenation of hydrazine borane $N_2H_4BH_3$ (HB) using supported nickel catalysts at $50^{\circ}C$. In the presence of monometallic nickel catalysts, the dehydrogenation of HB is a one-step reaction consisting of the hydrolysis of the $BH_3$ group only. The challenge is to activate nickel to make it reactive towards the $N_2H_4$ moiety of HB. A set of 52 catalysts were prepared by using 2 supports ($Al_2O_3$ and $TiO_2$), 5 nickel precursors and 3 preparation methods. For the first time, we show that the supported nickel catalysts are able to dehydrogenate the $NH_3$ moiety of HB. In our experimental conditions, the best results were obtained with 20 wt% Ni-$Al_2O_3$ and 20 wt% Ni-$TiO_2$, with ca. 190 mL $H_2+N_2$ generated over a total theoretical volume of 283 mL, suggesting $H_2$ selectivity of 37 and 32%, respectively. Both catalysts were then characterized by EDX, XPS, and XRD. Our achievement is the first step forward and opens new perspectives for developing catalysts for the total dehydrogenation of HB.

• 자원환경지질
• /
• 제25권3호
• /
• pp.283-296
• /
• 1992

The Keumryeong deposits is a low grade copper deposits in which copper minerals form disseminated grains and thin veinlets in felsic volcanics seem to be dacite. Alteration of the volcanics consists mainly pervasive propylitization and silicification. Potassic alteration characterized by biotite developed locally adjacent to southwestern contact of granodiorite body. Principal sulfide minerals in altered zone are mainly pyrite and lesser chalcopyrite. Chalcopyrite content in potassic zone is relatively higher than that of surrounding propylitized zone. Pyrite and chalcopyrite accompanies magnetite, molybdenite, sphalerite, pyrrhotite, arsenopyrite, pentlandite, marcasite, hematite, ilmenite, rutile, bismuthinite and native Bi as disseminations, veinlets and knots. Granodiorite body is propylitized and contains veinlets of pyrite, chalcopyrite and molybdenite. Fluid inclusions in sulfide-bearing quartz veinlets and quartz grains of felsic volcanics and granodiorite in altered zone consist of liquid-rich, vapor-rich, $CO_2-bearing$ and halite-bearing inclusions. These four types of inclusion intimately associated on a microscopic scale and indicate condensing or boiling of ore fluid during mineralization. Homogenization temperature of coexisting fluid inclusions are mostly in the range of 350 to $450^{\circ}C$. High salinity fluid contains 28.6 to 48.4 weight percent NaCI equivalent and moderate salinity fluid cotains 0.5 to 12.5 weight percent NaCl equivalent. Pressure estimated from $CO_2$ mole fraction of $CO_2-bearing$ inclusion range 160 to 375 bars. The Kigu copper deposits is a fissure filling copper vein developed 500 m south from the Keumryong deposits. Mineralogy and fluid inclusion data of the Kigu deposits are similar to that of the Keumryeong deposits. Homogenization temperature of fluid inclusions from the Kigu deposits are reasonable agreement with temperature estimated from sulfidation curve of cubanite-chalcopyrite-pyrite-pyrrhotite and pyrite-pyrrhotite mineral assemblages. Not only mineral occurrence and wall rock alteration in the Keumryeong deposits but also fluid inclusion data such as temperature, salinity, pressure and boiling evidences are similar to those of porphyry copper deposits.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 A
• /
• pp.283-286
• /
• 2003

The electric traction load is quite differ from general power system load which is single-phase, high-speed heavy load receiving power from 3-phase power system and also has variable load characteristics over time and space. Therefore, there are inevitably power quality problems such as steady state or transient voltage drop, voltage imbalance and harmonic distortion. In addition, it is expected that transient voltage sag could affect the safety of feeding system. Thus, in this paper transient analysis and voltage sag compensation of AT(Auto Transformer) feeding system are studied. The fault study of traction network is analysed by using PSCAD/SMTDC simulation tool. In addition, application of DVR in electric traction system is proposed to compensate the voltage sag of traction network which is occurred by the fault of utility source. The results of fault study will be a useful research works for operation and setting of electric traction relay. Also, it can be shown that application of the DVR in electric system is very useful to compensate the voltage sag from the result of related simulated work. The results of study will be a useful research works for management and planning of power quality in electric traction system.