• 제목/요약/키워드: A283-C

검색결과 405건 처리시간 0.021초

1bit 전 가산기와 4bit 덧셈 연산기 74LS283에서 의정 논리와 부 논리에 대한 분석 (Analysis of Positive Logic and Negate Logic in 1bit adder and 4 bit adder 74LS283)

  • 정동호;정태상;유준복
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2000년도 추계학술대회 논문집 학회본부 D
    • /
    • pp.781-783
    • /
    • 2000
  • 1bit full adder have 3 input (including carry_in) and 2 outputs(Sum and Carry_out). Because of 1 bit full adder's propagation delay. We usually use 4-bit binary full adder with fast carry, 74LS283. The 74LS283 is positive logic circuit chip. But the logic function of binary adder is symmetrical, so it can be possible to use it not only positive logic but also the negative logic. This thesis use symmetrical property. such as $C_{i+1}(\bar{a_i}\bar{b_i}\bar{c_i})=C_{i+1}{\bar}(a_i,\;b_i,\;c_i)$ and $S_i(\bar{a_i}\bar{b_i}\bar{c_i})=\bar{S_i}(a_i,\;b_i,\;c_i)$. And prove this property with logic operation. Using these property, the 74LS283 adder is possile as the negation logic circuit. It's very useful to use the chip in negative logic. because many system chip is negative logic circuit. for example when we have negative logic chip with 74LS283. we don't need any not gate for 74LS283 input, and just use output of adder(74LS283) as the negation of original output.

  • PDF

C 형 간염 바이러스의 외피당단백질 E1 및 E2의 융합단백질 $GST-E1_{192-283}$$-E2_{384-649}$의 대장균에서의 과량발현 및 면역원성 연구 (Overexpression of the $E1_{192-283}$ and $E2_{384-649}$ Proteins of Hepatitis C Virus in GST Fusion Forms in E. coli and Their Immunogenicity)

  • 성영림;최시영;임동수
    • 대한바이러스학회지
    • /
    • 제27권2호
    • /
    • pp.105-113
    • /
    • 1997
  • C 형 간염 바이러스 (Hepatitis C Virus, HCV)는 두종류의 외피당단백질 $E1_{192-383}$$E2_{384-746}$를 갖고 있다. $E1_{192-383}$$E2_{384-740}$ 단백질은 glutathione S-transferae (GST) 융합단백질의 형태로 대장균에서 발현되지 않았으나, 이 단백질들의 C말단에 존재하는 소수성영역을 제거하였을 때 $GST-E1_{192-283}$ 융합단백질은 과량으로 가용성 형태로 발현되었고, $GST-E2_{384-649}$ 융합단백질은 비 가용성 형태로 발현되었다. 이 융합단백질들 각각은 HCV 양성환자의 혈청과 특이적으로 반응하였다. Thrombin으로 처리하여 얻은 정제된 $E1_{192-283}$ 단백질 및 융합형태의 $GST-E2_{384-649}$ 단백질 각각을 생쥐에 접종하였을 때 E1 및 E2 특이적인 항체가 생성되었다. 이 결과들은 $E1_{192-383}$$E2_{384-649}$ 융합단백질 C 말단에 존재하는 소수성영역이 이 단백질들의 발현량 및 가용성에 영향을 주며 $E1_{192-283}$ 단백질 영역내에 HCV 양성환자의 혈청과 특이적으로 반응하는 epitope (s)이 존재한다는 것을 제시해 주고 있다.

  • PDF

GS 283의 평활근 억제 작용기전 (Mechanisms Underlying the Inhibitory Effect of GS 283 in Various Smooth Muscles)

  • 김시환;이영수;정원석;장기철
    • 대한약리학회지
    • /
    • 제30권1호
    • /
    • pp.101-109
    • /
    • 1994
  • Tetrahydroisoquinoline유도체인 GS 283의 약리학적 특성을 흰쥐 흉부대동맥, 기니픽 결장띠 및 토끼 장간막 동맥 및 흰쥐 뇌를 사용하여 조사하였다. 혈관 평활근에서 GS283은 고 $K^+$에 의한 수축을 농도 의존적으로 억제하여 $Ca^{2+}$ 길항작용을 보였다. 또한 ${alpha}_1$- 수용체 자극에 의한 수축도 억제하였다. GS 283의 혈관이완 작용은 propranolol영향을 받지 않으므로 ${\beta}$-수용체 자극작용에 의한 것이 아니었다. 세포내 칼슘이온과 근장력 변화를 동시에 측정하였을 때 GS 283의 억제효과는 조직내 형광의 증가를 수반했다. 이 증가는 fura 2형광에 의한것이 아니라 내인성 pyridine nucleotide에 의한 것이며 이는 GS 283이 미토콘드리아 기능을 억제하는 효과가 있음을 시사했다. 흰쥐 뇌의 cAMP와 cGMP 의존성 phosphodiesterase에 대한 GS 283의 $K_i$,값은 2.5와 6.7mM이었다. 이상의 결과에서 GS 283의 약리 작용은 $Ca^{2+}$ 길항작용, ${\alpha}_1$- 수용체억제 작용 및 cyclic nucleotide 의존성 phosphodiesterase 억제 등 다양한 작용이 있으며 평활근 수축 억제에 대한 GS283 작용에는 $Ca^{2+}$ 길항이 가장 중요한 요인이 될 것으로 생각된다.

  • PDF

저온영역에서의 A516-60, A283-C, A285-C, SB410 소재 특성 평가 (A Study for Mechanical Property for A516-60, A283-C, A285-C and SB410 materials under Low Temperature)

  • 오정수;이희범;이봉수
    • 한국산학기술학회논문지
    • /
    • 제20권9호
    • /
    • pp.405-411
    • /
    • 2019
  • 본 연구에서는 구조 및 압력용기용 소재 A516-60, A283-C, A285-C, SB410 에 대하여 상온 $20^{\circ}C$ 대비 저온영역, $-20^{\circ}C$$-40^{\circ}C$에서 인장시험을 수행하고 기계적 물성변화를 정리 및 분석하였다. 결과를 분석하면, A516-60의 경우, 상온 $20^{\circ}C$에서 저온 $-20^{\circ}C$$-40^{\circ}C$로 진입 시 평균 항복응력은 각각 6.4 % 및 7.5 % 증가하였고 평균 인장응력은 1.3 % 및 4.1 % 증가하였다. 반면, 평균 연신율은 상온상태 대비 각각 4.7% 및 20.4 % 감소하였다. A283-C의 경우, 평균 항복응력은 각각 8.8 % 및 9.8 % 증가함을 보였고 평균 인장응력 또한 각각 4.1 % 및 5.9 % 증가하였으나, 평균 연신율은 각각 7.4 % 및 9.9 % 감소하였다. A285-C 또한 평균 항복응력은 각각 1.8 % 및 8.6 % 증가하였고 평균 인장응력 또한 각각 2.6 % 및 5.3 % 증가하였으나 평균 연신율의 경우 거의 변화가 없는 것으로 나타났다. 마지막으로 SB410의 경우, 평균 항복응력은 각각 7.1 % 및 11.8 % 증가하였고 평균 인장응력은 각각 4.3 % 및 5.5 % 증가하였으나 평균 연신율은 각각 8.7 % 및 13.5 % 감소를 보였다. 한편, 저온 $-40^{\circ}C$로 진입 시, A516-60과 SB410의 평균 연신율은 상온상태 대비 각각 20.4 % 및 13.5 %의 급격한 감소를 보였으며 $-20^{\circ}C$에서 $-40^{\circ}C$ 로 온도 저하 시, 취성이 급격히 증가하는 것으로 사료된다.

Investigating the fatigue failure characteristics of A283 Grade C steel using magnetic flux detection

  • Arifin, A.;Jusoh, W.Z.W.;Abdullah, S.;Jamaluddin, N.;Ariffin, A.K.
    • Steel and Composite Structures
    • /
    • 제19권3호
    • /
    • pp.601-614
    • /
    • 2015
  • The Metal Magnetic Memory (MMM) method is a non-destructive testing method based on an analysis of the self-magnetic leakage field distribution on the surface of a component. It is used for determining the stress concentration zones or any irregularities on the surface or inside the components fabricated from ferrous-based materials. Thus, this paper presents the MMM signal behaviour due to the application of fatigue loading. A series of MMM data measurements were performed to obtain the magnetic leakage signal characteristics at the elastic, pre-crack and crack propagation regions that might be caused by residual stresses when cyclic loadings were applied onto the A283 Grade C steel specimens. It was found that the MMM method was able to detect the defects that occurred in the specimens. In addition, a justification of the Self Magnetic Flux Leakage patterns is discussed for demonstrating the effectiveness of this method in assessing the A283 Grade C steel under cyclic loadings.

GPS L1/L2C/L5 수신기를 위한 적응 코드추적루프 설계 (Design of a Adaptive Code Tracking Loop for GPS L1/L2C/L5 Receivers)

  • 최현호;임덕원;이상욱;김지훈;이상정
    • 제어로봇시스템학회논문지
    • /
    • 제17권3호
    • /
    • pp.283-288
    • /
    • 2011
  • In this paper, an adaptive signal tracking loop for a GPS L1/L2C/L5 receiver is designed. The design parameters is adjusted according to the receiver's operating conditions such as the signal strength and the receiver dynamics by using the different characteristics of GPS L1, L2C and L5 signal. Simulation results show that the tracking accuracy of the proposed signal tracking loop is better than those of L1, L2C and L5 only signal tracking loop.

Interaction Characteristics of Nucleoside Analogues with Human Organic Anion Transporter 1 and 3

  • Choi, Jun-Shik;Cheon, Eun-Pa;Han, Hyo-Kyung
    • Journal of Pharmaceutical Investigation
    • /
    • 제36권4호
    • /
    • pp.283-286
    • /
    • 2006
  • The present study aimed to investigate the interaction of nucleoside analogs with human organic anion transporter 1 and 3(hOAT1 and hOAT3) that play a primary role in the tubular uptake of endogenous and exogenous organic anions in the kidney. The interactions of ddC, ara-C, ara-A and ara-U with hOAT1 and hOAT3 were examined using MDCK cells stably overexpressing hOAT1 or hOAT3. Among the tested drugs, ddC showed the highest affinity to hOAT1 with $IC_{50}$ values of 5.2 mM, while ara-A, ara-C and ara-U weakly inhibited the cellular uptake of $[^3H]-PAH$ in MDCK-hOAT1 cells at 1 mM. In contrast, all the tested drugs did not have any inhibition effect on the cellular uptake of $[^3H]-estrone$ sulfate in MDCK-hOAT3 cells over the drug concentration of 0.01-2 mM, implying that they might not interact with hOAT3. Taken all together, the present study suggests that hOAT1 could weakly interact with nucleoside analogues such as ddC, ara-C, ara-A and ara-U but the interaction with hOAT3 during the urinary excretion of these nucleoside analogues may be negligible in the kidney.

설사증 환자에서 Clostridium Difficile Toxin Value 분석 (Analysis of Clostridium Difficile Toxin Value in Diarrhea Patients)

  • 권세영;윤인숙
    • 한국콘텐츠학회논문지
    • /
    • 제10권5호
    • /
    • pp.259-266
    • /
    • 2010
  • Clostridium difficile 연관 설사증은 항생제 관련 병원 감염 설사에 매우 중요하며, 최근 병원 내 C. difficile 감염 발생률은 계속 증가해왔다. 본 연구에서는 2005년 1월부터 2008년 12월까지 대변 총 1,329 검체를 검사 하여, C. difficile 발생률과 감염 특성을 분석하였다. 전체 1,329 검체 중 독소 A/B검사(EIA)양성 반응을 나타낸 검체는 총283건이었다. 4년간 평균 양성률은 21.2%였으며, 연령 분포에서는 70세 이상에서 가장 높았다. 내시경 소견에서 PMC 57.7%, 정상 소견 19.5%였으며, 조직학적 소견에서는 PMC26.8%, AAC 52.2% 였다. C. difficile 은 PMC 와 관련이 있으나, 내시경 검사 및 조직 검사 소견에서는 정상에서 PMC 까지 다양하게 나타났다.

Fe-TiC 복합재료 분말의 상압소결과 방전플라즈마소결 (Pressureless Sintering and Spark-Plasma Sintering of Fe-TiC Composite Powders)

  • 이병훈;배상원;배선우;;김지순
    • 한국분말재료학회지
    • /
    • 제22권4호
    • /
    • pp.283-288
    • /
    • 2015
  • Two sintering methods of a pressureless sintering and a spark-plasma sintering are tested to densify the Fe-TiC composite powders which are fabricated by high-energy ball-milling. A powder mixture of Fe and TiC is prepared in a planetary ball mill at a rotation speed of 500 rpm for 1h. Pressureless sintering is performed at 1100, 1200 and $1300^{\circ}C$ for 1-3 hours in a tube furnace under flowing argon gas atmosphere. Spark-plasma sintering is carried out under the following condition: sintering temperature of $1050^{\circ}C$, soaking time of 10 min, sintering pressure of 50 MPa, heating rate of $50^{\circ}C$, and in a vacuum of 0.1 Pa. The curves of shrinkage and its derivative (shrinkage rate) are obtained from the data stored automatically during sintering process. The densification behaviors are investigated from the observation of fracture surface and cross-section of the sintered compacts. The pressureless-sintered powder compacts show incomplete densification with a relative denstiy of 86.1% after sintering at $1300^{\circ}C$ for 3h. Spark-plasma sintering at $1050^{\circ}C$ for 10 min exhibits nearly complete densification of 98.6% relative density under the sintering pressure of 50 MPa.

안드로이드 C2DM을 이용한 T-DMB 자동인지 기능 구현 (An implementation of wake-up method for T-DMB by android C2DM)

  • 전인찬;최성종;이용태
    • 한국인터넷방송통신학회논문지
    • /
    • 제12권5호
    • /
    • pp.283-290
    • /
    • 2012
  • 재난방송의 효과를 높이기 위해서는 수신기에 자동인지(wake-up) 기능이 반드시 포함되어야 한다. 자동인지란 단말이 항상 재난여부를 확인하고 재난이 확인되면 단말이 활성화되어 즉시 사용자에게 재난정보를 알리는 기능이다. 법에 지정된 재난방송 매체 중 하나인 지상파 DMB는 표준에서 이 기능을 기술적으로 구현할 수 있도록 되어 있으나 배터리 효율 등의 문제로 실제 자동인지 기능을 가진 단말은 출시되지 않고 있다. 본 논문에서는 자동인지 문제를 해결하기 위한 방안으로 T-DMB 수신 기능을 가진 안드로이드 스마트폰 환경에서 구글 C2DM을 이용하였다. 이 방법을 이용하여 재난시 단말을 깨우고(wake-up), 사용자의 선택에 따라 T-DMB를 통해 추가적인 멀티미디어 재난정보를 확인할 수 있다.