• Proceedings of the KIEE Conference
• /
• 2000.11d
• /
• pp.781-783
• /
• 2000

1bit full adder have 3 input (including carry_in) and 2 outputs(Sum and Carry_out). Because of 1 bit full adder's propagation delay. We usually use 4-bit binary full adder with fast carry, 74LS283. The 74LS283 is positive logic circuit chip. But the logic function of binary adder is symmetrical, so it can be possible to use it not only positive logic but also the negative logic. This thesis use symmetrical property. such as $C_{i+1}(\bar{a_i}\bar{b_i}\bar{c_i})=C_{i+1}{\bar}(a_i,\;b_i,\;c_i)$ and $S_i(\bar{a_i}\bar{b_i}\bar{c_i})=\bar{S_i}(a_i,\;b_i,\;c_i)$. And prove this property with logic operation. Using these property, the 74LS283 adder is possile as the negation logic circuit. It's very useful to use the chip in negative logic. because many system chip is negative logic circuit. for example when we have negative logic chip with 74LS283. we don't need any not gate for 74LS283 input, and just use output of adder(74LS283) as the negation of original output.

• The Journal of Korean Society of Virology
• /
• v.27 no.2
• /
• pp.105-113
• /
• 1997

The truncated $E1_{192-283}$ and $E2_{384-649}$ genes of hepatitis C virus (HCV) linked to the gene for glutathione S-transferase (GST) were constructed and their expressions were analyzed. The $GST-E1_{192-283}$ fusion gene overexpressed the fusion protein in E. coli as a soluble form, while the $GST-E1_{192-383}$ plasmid did not express expected fusion protein. The purified $GST-E1_{192-283}$ fusion protein was efficiently cleaved by thrombin. More than 90% pure, HCV $E1_{192-283}$ protein was obtained by GST-agarose chromatography. The truncated $GST-E2_{384-649}$ fusion gene expressed the fusion protein mainly as an insoluble form, whereas the $GST-E2_{384-740}$ did not express the fusion protein. The truncated $GST-E1_{182-283}$ and $GST-E2_{384-649}$ fusion proteins reacted specifically with an HCV patient serum. In addition, mice immunized with either the purified $E1_{192-283}$ or $GST-E2_{384-649}$ proteins generated specific antibodies to each antigen. The results suggested that hydrophobic carboxyl portions of the E1 and E2 proteins might affect expression levels as well as the solubility of each fusion protein in bacteria. Also, the truncated E1 protein with Tyr-192 to Ser-283 contained antigenic epitope(s) which could be specifically recognized by an HCV patient serum.

• The Korean Journal of Pharmacology
• /
• v.30 no.1
• /
• pp.101-109
• /
• 1994

Pharmacological characterization of GS 283, a tetrahydroisoquinoline derivative has been elucidated using rat thoracic aorta, guinea pig tenea coli and rabbit mesentery artery in vitro. GS 283 showed calcium antagonistic action in vascular smooth muscle, since high $K^+-induced$ contraction was concentration dependently inhibited. GS 283 also inhibited the contraction induced by ${\alpha}_1$ receptor activation. Vasodilating action of GS 283 was not modified by the propranolol, indicating that GS 283 has no ${\beta}$ receptor stimulatory action. Simultaneous measurement of intracellular calcium change and muscle tension indicated that the inhibitory effect of GS 283 was accompanied by the increase in tissue fluorescence. This increment was not due to fura 2 fluorescence but to endogenous pyridine nucleotide, suggesting that GS 283 has an effect to inhibit mitochondrial function. GS 283 had an inhibitory action on cyclic AMP and GMP-dependent phosphodiesterases from rat brain with Ki values of 2.5 and 6.7 mM. From these findings we concluded that GS 283 has multiple action such as the inhibition of cyclic nucleotide-dependent phosphodiesterases, blocking of calcium channel as well as inhibition of mitochondrial function which are responsible for vasodilatation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.9
• /
• pp.405-411
• /
• 2019

In this study, tensile tests were carried out on materials (A516-60, A283-C, A285-C, and SB410) for structural and pressure vessels at temperatures of $20^{\circ}C$, $-20^{\circ}C$, and $-40^{\circ}C$, and the changes in the mechanical properties were analyzed. Compared to the results at $20^{\circ}C$, the average yield stress increased by 6.4% and 7.5% at $-20^{\circ}C$ and $-40^{\circ}C$ for A516-60, while the average tensile stress increased by 1.3% and 4.1%, respectively. The average elongation decreased by 4.7% and 20.4% at these temperatures. In the case of A283-C, the average yield stress increased 8.8% and 9.8%, the average tensile stress increased by 4.1% and 5.9%, and the average elongation rate decreased by 7.4% and 9.9% at $-20^{\circ}C$ and $-40^{\circ}C$, respectively. For A285-C, the average yield stress increased by 1.8% and 8.6%, and the average tensile stress increased by 2.6% and 5.3%, respectively, but there was little change in the average elongation. Finally, for SB410, the average yield stress increased by 7.1% and 11.8%, the average tensile stress increased by 4.3% and 5.5%, but the average elongation rate decreased by 8.7% and 13.5%, respectively.

• Steel and Composite Structures
• /
• v.19 no.3
• /
• pp.601-614
• /
• 2015

The Metal Magnetic Memory (MMM) method is a non-destructive testing method based on an analysis of the self-magnetic leakage field distribution on the surface of a component. It is used for determining the stress concentration zones or any irregularities on the surface or inside the components fabricated from ferrous-based materials. Thus, this paper presents the MMM signal behaviour due to the application of fatigue loading. A series of MMM data measurements were performed to obtain the magnetic leakage signal characteristics at the elastic, pre-crack and crack propagation regions that might be caused by residual stresses when cyclic loadings were applied onto the A283 Grade C steel specimens. It was found that the MMM method was able to detect the defects that occurred in the specimens. In addition, a justification of the Self Magnetic Flux Leakage patterns is discussed for demonstrating the effectiveness of this method in assessing the A283 Grade C steel under cyclic loadings.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.3
• /
• pp.283-288
• /
• 2011

In this paper, an adaptive signal tracking loop for a GPS L1/L2C/L5 receiver is designed. The design parameters is adjusted according to the receiver's operating conditions such as the signal strength and the receiver dynamics by using the different characteristics of GPS L1, L2C and L5 signal. Simulation results show that the tracking accuracy of the proposed signal tracking loop is better than those of L1, L2C and L5 only signal tracking loop.

• Journal of Pharmaceutical Investigation
• /
• v.36 no.4
• /
• pp.283-286
• /
• 2006

The present study aimed to investigate the interaction of nucleoside analogs with human organic anion transporter 1 and 3(hOAT1 and hOAT3) that play a primary role in the tubular uptake of endogenous and exogenous organic anions in the kidney. The interactions of ddC, ara-C, ara-A and ara-U with hOAT1 and hOAT3 were examined using MDCK cells stably overexpressing hOAT1 or hOAT3. Among the tested drugs, ddC showed the highest affinity to hOAT1 with $IC_{50}$ values of 5.2 mM, while ara-A, ara-C and ara-U weakly inhibited the cellular uptake of $[^3H]-PAH$ in MDCK-hOAT1 cells at 1 mM. In contrast, all the tested drugs did not have any inhibition effect on the cellular uptake of $[^3H]-estrone$ sulfate in MDCK-hOAT3 cells over the drug concentration of 0.01-2 mM, implying that they might not interact with hOAT3. Taken all together, the present study suggests that hOAT1 could weakly interact with nucleoside analogues such as ddC, ara-C, ara-A and ara-U but the interaction with hOAT3 during the urinary excretion of these nucleoside analogues may be negligible in the kidney.

• The Journal of the Korea Contents Association
• /
• v.10 no.5
• /
• pp.259-266
• /
• 2010

Clostridium difficile-associated disease (CDAD) is an important nosocomial infectious diarrhea and is associated with antibiotic use. Recently, incidence of C. difficile has been increasing in hospitals. A total of 1,329 stool specimens were examined from January, 2005 to December, 2008. This study analyzed the incidence and clinical characteristics of C. difficile infections on them. Out of 1,329 stool specimens, 283 specimens showed toxin A/B positive, using EIA. The positive rate was 21.2%; with the highest incidence among and above the 70years old. On endoscopy, psedo membranous colitis was found in 57.7%, and 19.5% of patients were normal. Pathologic finding showed PMC in 26.8% of patients, AAC in 52.2%. C. difficile was associated with PMC, however, endoscopic and pathologic findings tests showed normal to PMC.

• Journal of Powder Materials
• /
• v.22 no.4
• /
• pp.283-288
• /
• 2015

Two sintering methods of a pressureless sintering and a spark-plasma sintering are tested to densify the Fe-TiC composite powders which are fabricated by high-energy ball-milling. A powder mixture of Fe and TiC is prepared in a planetary ball mill at a rotation speed of 500 rpm for 1h. Pressureless sintering is performed at 1100, 1200 and $1300^{\circ}C$ for 1-3 hours in a tube furnace under flowing argon gas atmosphere. Spark-plasma sintering is carried out under the following condition: sintering temperature of $1050^{\circ}C$, soaking time of 10 min, sintering pressure of 50 MPa, heating rate of $50^{\circ}C$, and in a vacuum of 0.1 Pa. The curves of shrinkage and its derivative (shrinkage rate) are obtained from the data stored automatically during sintering process. The densification behaviors are investigated from the observation of fracture surface and cross-section of the sintered compacts. The pressureless-sintered powder compacts show incomplete densification with a relative denstiy of 86.1% after sintering at $1300^{\circ}C$ for 3h. Spark-plasma sintering at $1050^{\circ}C$ for 10 min exhibits nearly complete densification of 98.6% relative density under the sintering pressure of 50 MPa.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.5
• /
• pp.283-290
• /
• 2012

In this paper, a system for wake-up method for T-DMB AEAS is introduced. Wake-up function is important in emergency alert service. But there was no AEAS receiver that has the method. Google C2DM is efficient method for wake-up in android platform. So this paper suggests wake-up method in android smartphone with T-DMB by C2DM. This method will be an alternative plan until native broadcasting wake-up technology.