• Journal of Preventive Medicine and Public Health
• /
• v.43 no.4
• /
• pp.319-329
• /
• 2010

Objectives: This study was performed to determine the levels of quality of life (QOL) according to the grade of long-term care service for the elderly people who were admitted from long-term care insurance, and to reveal its association with the physical and mental functioning such as the Activity of Daily Living (ADL), the Instrumental Activity of Daily Living (IADL), the Center for Epidemiologic Studies Depression Scale (CES-D), and the Mini-Mental State Examination-Korean version (MMSE-K). Methods: The interviews were performed during the period from March 1 to May 31, 2009, for 958 elderly people in urban and rural areas. The questionnaire items included various indices such as the ADL, IADL, CES-D, and MMSE-K, as independent variables and the index of QOL, as the dependent ones. For statistical analysis, t-tests were used for the mean scores of QOL according to gender and the grade of long-term care services, and Spearman's correlation was used for each variable. The effects of physical and mental functioning for QOL were assessed by covariance structure analysis. The statistical significance was set at p<0.05. Results: The mean scores of QOL among all the subjects was $55.4{\pm}15.62$ (Grade I: $49.7{\pm}14.17$, Grade II: $56.8{\pm}14.62$, Grade III: $59.4{\pm}16.36$), and it was lower according to the higher grade of long-term care insurance. In terms of the correlation matrix of the QOL and the physical and mental function factors, the QOL showed positive correlation with the ADL, IADL and MMSE-K, while it had negative correlation with depression. On the analysis of covariance, mental functioning (depression and the MMSE-K) had a greater influence on the level of QOL than the physical functioning (ADL and IADL). Conclusions: The level of the QOL in the elderly people who were admitted from long-term care insurance was lower according to higher the grade of long-term care insurance. Also, the mental functioning (depression and MMSE-K) was more influential on the level of the QOL than the physical functioning (ADL and IADL).

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.04a
• /
• pp.153-158
• /
• 1995

보 및 평판의 진동에 대해서 에너지의 손실은 재료감쇠를 이용한 표면감쇠처리나 지지부에서의 감쇠처리에 의하여 증가될 수 있다. 감쇠재료를 이용한 표면감쇠처리의 예로서 보/평판 표면에 접착되는 감쇠 테이프나 코팅등은 아주 효과적임이 입증되었다. 마찬가지로 지지부 감쇠처리는 점탄성재료의 삽입에 의해서 설명될수 있다[1]. 보/평판의 감쇠에 대한 최근의 많은 연구들은 진동하고 있는 보/평판의 표면에 적용하는 감쇠 테이프 혹은 적층형태의 감쇠 처리방법에 대해서 주로 수행되었다. 일반적으로 표면감쇠처리방법은 진동감소에 아주 효과적이지만 실제 적용상에서 항상 가능한 것은 아니며, 이와 같은 경웨는 지지부 감쇠 처리방법에 의존하게 된다[2]. 감쇠특성을 갖는 점탄성재료를 실제로 적용할 때 보/평판의 유한한 길이가 점탄성재료로 지지되며 점탄성재료의 물성치와 치수에 따라서 계의 모우드 매개변수(고유진동수, 계의 손실계수 그리고 모우드형상)가 크게 달라진다. 그리고 이와 같은 계에 대해서는 지지부의 거동보다는 전체 시스템의 고유진동수와 손실계수 그리고 보 영역에서의 모우드 형상에 더 관심이 있으므로 지지부 영역을 집중매개변수(lumped parameter)로 나타내어 계를 해석할 수 있다. 일반적으로 보와 평판의 경계에서는 병진 및 회전방향의 강성 뿐만 아니라 두 강성사이에 연성효과도 동시에 발생하게 되므로 이 항을 고려하여 계를 모델링해야 한다. 본 연구에서는 우선 점탄성 재료에 의한 지지부영역의 등가 강성계수들을 구하고 경계에 강성행렬을 갖는 보의 등가시스템을 얻는다. 그리고 등가시스템의 주파수방정식으로부터 모우드 매개변수에 대한 지지부의 영향을 살펴본다. 또한 시스템이 비교적 복잡한 사각 평판의 진동에 대해서도 동강성행렬법(dynamic stiffness matrix method)을 이용하여 해석하고자 한다. 수준임이 입증되었다. 본 연구의 결과를 토대로우리나라 젊고 건강한 남성에게 적합한 무게상수는 작업자군에 대하여 25.05kg, 학생군에 대하여 20.24kg 으로 나타나 이는 미국 NIOSH 안전기준과 대체로 일치함을 발견하였다.ive structures utilized in Client/server architecture for distribution and cooperative processing of application between server and client this study presents two different data management methods under the Client/server environment; one is "Remote Data Management Method" which uses file server or database server and. the other is "Distributed Data Management Method" using distributed database management system. The result of this study leads to the conclusion that in the client/server environment although distributed application is assumed, the data could become centralized (in the case of file server or database server) or decentralized (in the case of distributed database system) and the data management method through a distributed database system where complete responsi

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.16 no.2
• /
• pp.114-124
• /
• 2014

For classifying fire damaged areas and analyzing burn severity of two large-fire areas damaged over 100 ha in 2011, three methods were employed utilized supervised classification, unsupervised classification and Normalized Difference Vegetation Index (NDVI). In this paper, the post-fire imageries of SPOT were used to compute the Maximum Likelihood (MLC), Minimum Distance (MIN), ISODATA, K-means, NDVI and to evaluate large-scale patterns of burn severity from 1 m to 5 m spatial resolutions. The result of the accuracy verification on burn severity from satellite images showed that average overall accuracy was 88.38 % and the Kappa coefficient was 0.8147. To compare the accuracy between burn severity and field survey at Uljin and Youngduk, two large fire sites were selected as study areas, and forty-four sampling plots were assigned in each study area for field survey. The burn severities of the study areas were estimated by analyzing burn severity (BS) classes from SPOT images taken one month after the occurrence of the fire. The applicability of composite burn index (CBI) was validated with a correlation analysis between field survey data and burn severity classified by SPOT5, and by their confusion matrix. The result showed that correlation between field survey data and BS by SPOT5 were closely correlated in both Uljin (r = -0.544 and p<0.01) and Youngduk (r = -0.616 and p<0.01). Thus, this result supported that the proposed burn severity analysis is an adequate method to measure burn severity of large fire areas in Korea.

• Journal of Adhesion and Interface
• /
• v.2 no.1
• /
• pp.9-17
• /
• 2001

Curing behavior and interfacial properties were evaluated using electrical resistance measurement and tensile/compressive fragmentation test. Electrical resistivity difference (${\Delta}R$) during curing process was not observed in a bare carbon fiber. On the other hand, ${\Delta}R$ appeared due to the matrix contraction in single-carbon fiber/epoxy composite. Logarithmic electrical resistivity of the untreated single-carbon fiber composite increased suddenly to the infinity when the fiber fracture occurred under tensile loading, whereas that of the ED composite reached relatively broadly up to the infinity. Comparing to the untreated case, interfacial shear strength (IFSS) of the ED treated composite increased significantly in both tensile fragmentation and compressive Broutman test. Microfailure modes of the untreated and the ED treated fiber composite showed the debonding and the cone shapes in tensile test, respectively. For compressive test, fractures of diagonal slippage were observed in both untreated and the ED treated composite. Sharp-end shape fractures exhibited in the untreated composite, whereas relatively dull fractures showed in the ED Heated composite. It is proved that ED treatments affected differently on the interfacial adhesion and microfailure mechanism under tensile/compressive tests.

• Journal of Conservation Science
• /
• v.27 no.1
• /
• pp.31-40
• /
• 2011

Copper-red (Dongwha, Jinsa) is Korean traditional inorganic pigment used for red-coloring on the porcelain surface during Goryeo and Joseon Periods. Trace amounts of copper-red porcelains are handed down because of the technical difficulty of making and coloring of the pigment. It is known that copper ore sources were extensively distributed in Korea according to old literatures and some of them are still producing copper ore at this present. Main types of copper-bearing mineral in Korea are chalcopyrite ($CuFeS_2$) and malachite ($Cu_2CO_3(OH)_2$), and they are easily collected from the ground surface. This means Korea had geographical and economic geological advantages for supplying raw material of the pigment. These two minerals showed good red-coloring in color test for porcelain pigment. As a coloring element, copper showed micro size less than $5{\mu}m$ in diameter in glaze matrix. The dispersion of copper particle is the most decisive factor for red chromaticity of copper-red porcelain, as well as copper content of the pigment.

• Journal of the Korea Concrete Institute
• /
• v.24 no.2
• /
• pp.111-120
• /
• 2012

This paper is a report about lap splice performance of rebar embedded in the strain-hardening cement-based composites (SHCCs) under monotonic and repeated tension loading. Ten mix proportions of cement-based composites such as SHCCs and normal concrete were investigated. The study parameters are comprised of (1) types of reinforcing fibers (polyethylene and steel fiber), (2) replacement levels of expansive admixture (EXA, 0% and 10%), and (3) compressive strength (30 and 100 MPa) of cement-based composites. Lap splice lengths (ld) of rebars in SHCC materials and normal concrete were 60% and 100% of splice length calculated by code requirements for structural concrete, respectively. Test results indicated that SHCCs materials can lead to enhancements in the lap splice performance of embedded rebar. All of the fiber reinforcement conditions (PE-SHCC and PESF-SHCC) considered in this study produced considerable improvements in the tensile strength, cracking behavior, and bond strength of lap-spliced rebar. Furthermore, adding EXA to SHCC matrix improved the tensile lap splice performance of rebar in SHCC materials. However, for controlling crack behavior, the performance of PE-SHCC was better than that of PESF-SHCC due to its mechanical properties. This study demonstrated an effective approach for reducing required development length of lap spliced rebar by using SHCC materials.

• Journal of Service Research and Studies
• /
• v.5 no.2
• /
• pp.15-24
• /
• 2015

The trade balance for the information and communications technology (ICT) industries in 2014 have reached 863 hundred million dollars as the main export products such as smart phone and semi-conductor increase, since the ICT industries have played an important role in economic growth in Korea. Until now, the consistent supporting of government and investment of company have been doing with the growth of ICT industries, as a result, Korea marked as the first in the UN electronic government preparing index, and rank 12 in the network preparing index through the policy of national information and basic plan of inter-industry convergence. However, as the unstable international economic circumstances, ICT industries is faced with the stagnation, and then preemptive development of products and services for ICT convergence industries is needed to continually get definite ICT Korea image. In this paper, the ICT convergence industry is analyzed and forecasted. In specific, the international and domestic market for cloud, 3D convergence, and internet of things is diagnosed. The market for ICT convergence industries is predicted to be 3.6 trillion dollar in the world, and 110 trillion won in domestic. From the analytical results for technology and services development, the preemptive supporting of the technology development and policy for the internet of things and 3D convergence industries is required. In addition to, through the future forecasting by socio-tech matrix method, the policy supporting for the ICT convergence area of healthcare, fintech, artificial intelligence, body platform, and human security is needed.

• Korean Journal of Social Welfare
• /
• v.61 no.1
• /
• pp.293-322
• /
• 2009

This study investigated the problems of remarried wife with alcoholic problem. Specifically, this study regarded the wife's alcoholic problem as the problems of dysfunctional interaction among family members rather than an individual problem. The study had three purposes as follows. First, what were the interactions sustaining the conflict of remarried family? Second, what were the characteristics of remarried family relating to family conflict? Third, what were the interventions of family therapy to resolve the conflicts of remarried family? The total family counseling was 9 sessions, which included individual, couple, and family counseling. The study used constant comparative analysis by using open coding method to find the factors relating interactions sustaining the conflict of remarried family, the characteristics of remarried family relating to family conflict, and the interventions of family therapy to resolve the conflicts of remarried family. Also, the study used Miles and Huberman's matrix and graphical network display to show the interaction of family members. The study found intriguing factors, counteracting factors, relationship level, and relational elements to wife's alcoholic problems among family members. The study revealed husband's rigid family rules, husband's execution of patriarchal authority, husband's pursuit of family identity, and husband's emphasis of union among family members as the characteristics of remarried family. On the other hand, the study found the reinforcement of spousal subsystem, the pursuit of change in communication pattern between husband and wife, the amelioration of rigid family rules, and the acceptance of differences among family members as the intervention of family therapy to resolve the conflicts of remarried family.

• Journal of Ginseng Research
• /
• v.44 no.1
• /
• pp.105-114
• /
• 2020

Background: Exploring the pharmacokinetic (PK) changes of various active components of single herbs and their combinations is necessary to elucidate the compatibility mechanism. However, the lack of chemical standards and low concentrations of multiple active ingredients in the biological matrix restrict PK studies. Methods: A putative multiple reaction monitoring strategy based on liquid chromatography coupled with mass spectrometry (LC-MS) was developed to extend the PK scopes of quantification without resorting to the use of chemical standards. First, the compounds studied, including components with available reference standard (ARS) and components lacking reference standard (LRS), were preclassified to several groups according to their chemical structures. Herb decoctions were then subjected to ultrahigh-performance liquid chromatography coupled with quadrupole time-of-flight mass spectrometry analysis with appropriate collision energy (CE) in MS² mode. Finally, multiple reaction monitoring transitions transformed from MS² of ultrahigh-performance liquid chromatography coupled with quadrupole time-of-flight mass spectrometry were used for ultrahigh-performance liquid chromatography coupled with triple quadrupole mass spectrometry to obtain the mass responses of LRS components. LRS components quantification was further performed by developing an assistive group-dependent semiquantitative method. Results: The developed method was exemplified by the comparative PK process of single herbs Radix Ginseng (RG), Radix Polygala (RP), and their combinations (RG-RP). Significant changes in PK parameters were observed before and after combination. Conclusion: Results indicated that Traditional Chinese Medicine combinations can produce synergistic effects and diminish possible toxic effects, thereby reflecting the advantages of compatibility. The proposed strategy can solve the quantitative problem of LRS and extend the scopes of PK studies.

• KSBB Journal
• /
• v.21 no.1 s.96
• /
• pp.34-41
• /
• 2006

The aim of this study is the development of biological removal process of methyl ethyl ketone (MEK) in odor gas, which is generated from the waste food recycling process. To develop the removal process of odor gas, MEK, the selection of proper biofilter support was carried out. When the biofilter equipment was passed by synthetic odor gas composed of 250 ppm of MEK, the maximum removal was achieved to $586.6g-MEK/m^3\;hr$ for polypropylene fibril as support. Under the same experimental conditions, the maximum removal in polyurethane support was obtained to $359.7 g-MEK/m^3\;hr$. Finally, the maximum removal in volcanic stone support was $56.2g-MEK/m^3\;hr$.