• Applied Biological Chemistry
• /
• v.48 no.3
• /
• pp.267-272
• /
• 2005

trans-Cinnamaldehyde, a major component of Cinnamomum cassia, was quantitatively analyzed using the $^1H-NMR$ spectrometry. Applicability of this method was confirmed through observing the variation of chemical shift in the $^1H-NMR$ spectrum of t-cinnamaldehyde and the integration value according to various sample concentrations or running temperatures. When the $^1H-NMR$ spectrometry was run for t-cinnamaldehyde (7.1429 mg/ml) at 19, 25, 30, 40 and $50^{\circ}C$, the chemical shifts of the doublet methine signal due to an aldehyde group were observed at 9.7202, 9.7184, 9.7169, 9.7142 and 9.7124 ppm, respectively, to imply that the running temperature had no significant variation in the chemical shift of the signal. The integration values of the signal were $1.37\;(19^{\circ}C),\;1.37\;(25^{\circ}C),\;1.37\;(30^{\circ}C),\;1.37(40^{\circ}C)$ and $1.37(50^{\circ}C)$, respectively, to also indicate running temperature gave no effect on the integration value. When the sample solutions with various concentrations such as 0.4464, 0.8929, 1.7857, 3.5714, 7.1429 and 14.286 mg/ml were respectively measured for the $^1H-NMR$ at $25^{\circ}C$, the chemical shifts of the aldehyde group were observed at 9.7206, 9.7201, 9.7196, 9.7192, 9.7185 and 9.7174 ppm. Even though the signal was slightly shifted to the high field in proportion to the increase of sample concentration, the alteration was not significant enough to applicate this method. The calibration curve for integration values of the doublet methine signal due to the aldehyde group vs the sample concentration was linear and showed very high regression rate ($r^2=1.0000$). Meantime, the $^1H-NMR$ spectra (7.1429 mg/ml $CDCl_3,\;25^{\circ}C$) of t-cinnamaldehyde and t-2-methoxycinnamaldehyde, another constituent of Cinnamomum cassia, showed the chemical shifts of the aldehyde group as ${\delta}_H$ 9.7174 (9.7078, 9.7270) for the former compound and ${\delta}_H$ 9.6936 (9.6839, 9.7032) for the latter one. The difference of the chemical shift between two compounds was big enough to be distinguished using the NMR spectrometer with 0.45 Hz of resolution. The contents of cinnamaldehyde in Cinnamomum cassia, which were respectively extracted with n-hexane, $CHCl_3$, and EtOAc, were determiend as 94.2 \;mg/g (0.94%), 137.6 mg/g (1.38%) and 140.1 mg/g(1.40%) t-cinnamaldehyde in each extract, respectively, by using the above method.

• Korean Journal of Environmental Agriculture
• /
• v.12 no.2
• /
• pp.112-120
• /
• 1993

The use of fertilizer N is essential for maximum economic yield of crops. Meanwhile, enrichment of $NO_3^-$in the environment has to be avoided. Winter barley crop has a short duration of growth before winter, but is used to receive N greater than 60 kg/ha at seeding. Experiments were performed to determine the quantitative aspect of the fate of soil applied urea N among the residual, leached, and uptaken by winter barley (cv. Olbori), and to evaluate the effect of soil temperature on nitrification. Four levels of urea (0, 40, 80, and 120 kg N/ha) was basal-dressed to Olbori. $NH_4^+$ appeared dominant in the soil until 40 days after seeding, whereas $NO_3^-$ did thereafter. Nitrification rate at $5^{\circ}C$ of soil temperature was 40 to 50% of that at $15^{\circ}C. Linear increases in the number of ammonia oxidizing and nitrite oxidizing bacteria of the soil was present as the level of urea fertilization was higher. Less than 60% of N applied at seeding was uptaken by winter barley until mid-March but 50% was lost from death of older barley leaves during overwintering. Thereby only 10% of the applied N remained in the barley in spring. Only 15% of the applied N was present in the rhizosphere. The 17 to 20% of the soil applied N leached out as $NO_3^-$ the rhizosphere. Nitrogen leaching during winter was estimated to be 16 and 20 kg/ha when the basal application level of urea fertilization was 80 and 120 kg/ha, respectively.

• Clinical and Experimental Pediatrics
• /
• v.48 no.5
• /
• pp.539-544
• /
• 2005

Purpose : The aim of this study was to investigate the pathophysiologic role of serum E-selectin, vascular endothelial growth factor(VEGF)-induced cell adhesion mollecule in Kawasaki disease(KD) and to look for the evidence of direct relationship between the plasma levels of soluble E-selectin and the incidence of coronary artery lesion(CAL). Methods : Changes in plasma levels of sE-selectin(n=98) over time were measured by enzyme-linked immunosorbent assay(ELISA) in 23 patients with acute KD and 25 age-matched febrile children. Results : Compared with control values, the peak levels of plasma sE-selectin were significantly elevated($mean{\pm}S.E$. : $22.89{\pm}12.53ng/mL$ vs $10.65{\pm}3.42ng/mL$, P=0.01) in KD. 5 patients with CAL, plasma sE-selectin levels before treatment were higher than in 18 patients without CAL($mean{\pm}S.E$. : $39.43{\pm}15.08ng/mL$ and $19.00{\pm}8.32ng/mL$, respectively; P=0.01). Plasma sE-selectin declined rapidly in the majority of KD patients regardless of the presence of CAL. Plasma sE-selectin levels after treatment and convalesent period were similar in KD patients with and without CAL. The plasma levels sE-selectin were correlated with those of white blood cell count(r=0.299, P<0.05), CRP(r=0.430, P<0.05), serum albumin(r=-0.483, P<0.05), serum protein(r=-0.502, P<0.05) and hemoglobin(r=-0.372, P<0.05) not with those of ESR, platelet, or duration of fever. There were significant differences in the initial level of serum sE-selectin between KD with and without CAL($mean{\pm}S.E$. : $39.44{\pm}15.08ng/mL$ vs. $19.00{\pm}17.18ng/mL$) in multivariated linear tests. Conclusion : Plasma sE-selectin levels were significantly higher in KD than in other febrile illness. Higher plamsa levels of sE-selectin may have potential as a predictor of CAL in patients with KD.

• The Korean Journal of Pesticide Science
• /
• v.18 no.2
• /
• pp.79-87
• /
• 2014

Pyriofenone is an aryl phenyl ketone fungicide that is newly registered in Korea in 2013 to control powdery mildew on food. The objective of this study was to develop reliable and sensitive analytical method for determination of pyriofenone residue in agricultural products for ensuring the food safety. The pyriofenone residues in all samples(Korean melon, pepper, potato, mandarin, soybean, and hulled rice) were extracted with acetonitrile, partitioned with dichloromethane, and then purified with a silica cartridge. The purified samples were analyzed by HPLC-UVD and confirmed with LC-MS. The linear range of pyriofenone was 0.05~5 mg/kg with the correlation coefficient ($r^2$) > 0.999. Average recoveries of pyriofenone ranged from 72.8% to 99.5% at the spiked level of 0.05 and 0.5 mg/kg, while the relative standard deviation was 2.3%~6.4%. In addition, the limit of detection and limit of quantification were 0.01 and 0.05 mg/kg, respectively. The results revealed that the developed and validated analytical method was suitable for pyriofenone determination in agricultural products.

• The Journal of Korean Society for Radiation Therapy
• /
• v.19 no.1
• /
• pp.27-33
• /
• 2007

Purpose: We have performed SRS (stereotactic radiosurgery) for avm (arterry vein malformation) and brain cancer. In order to verify dose and localization of SRS, dose distributions from TPS ($X-Knife^{(R)}$ 3.0, Radionics, USA) and GafChromic $EBT^{(R)}$ film in a head phantom were compared. Materials and Methods: In this study, head and neck region of conventional humanoid phantom was modified by substituting one of 2.5 cm slap with five 0.5 cm acrylic plates to stack the GafChromic $EBT^{(R)}$ film slice by slice with 5 mm intervals. Four films and five acrylic plates were cut along the contour of head phantom in axial plane. The head phantom was fixed with SRS head ring and adapted SRS localizer as same as real SRS procedure. CT images of the head phantom were acquired in 5 mm slice intervals as film interval. Five arc 6 MV photon beams using the SRS cone with 2 cm diameter were delivered 300 cGy to the target in the phantom. Ten small pieces of the film were exposed to 0, 50, 100, 200, 300, 400, 500, 600, 700, 800, 900 cGy, respectively to calibrate the GafChromic $EBT^{(R)}$ film. The films in the phantom were digitized after 24 hours and its linearity was calibrated. The pixel values of the film were converted to the dose and compared with the dose distribution from the TPS calculation. Results: Calibration curve for the GafChromic $EBT^{(R)}$ film was linear up to 900 cGy. The R2 value was better than 0.992. Discrepancy between calculated from $X-Knife^{(R)}$ 3.0 and measured dose distributions with the film was less than 5% through all slices. Conclusion: It was possible to evaluate every slice of humanoid phantom by stacking the GafChromic EBT film which is suitable for 2 dimensional dosimetry, It was found that film dosimetry using the GafChromic $EBT^{(R)}$ film is feasible for routine dosimetric QA of stereotactic radiosurgery.

• The Korean Journal of Pesticide Science
• /
• v.20 no.2
• /
• pp.93-103
• /
• 2016

A simultaneous analytical method was developed for the determination of isoxaflutole and metabolite (diketonitrile) in agricultural commodities. Samples were extracted with 0.1% acetic acid in water/acetonitrile (2/8, v/v) and partitioned with dichloromethane to remove the interference obtained from sample extracts, adjusting pH to 2 by 1 N hydrochloric acid. The analytes were quantified and confirmed via liquid chromatograph-tandem mass spectrometer (LC-MS/MS) in positive-ion mode using multiple reaction monitoring (MRM). Matrix matched calibration curves were linear over the calibration ranges ($0.02-2.0{\mu}g/mL$) for all the analytes into blank extract with $r^2$ > 0.997. For validation purposes, recovery studies were carried out at three different concentration levels (LOQ, 10LOQ, and 50LOQ) performing five replicates at each level. The recoveries were ranged between 72.9 to 107.3%, with relative standard deviations (RSDs) less than 10% for all analytes. All values were consistent with the criteria ranges requested in the Codex guideline (CAC/GL40, 2003). Furthermore, inter-laboratory study was conducted to validate the method. The proposed analytical method was accurate, effective, and sensitive for isoxaflutole and diketonitrile determination in agricultural commodities.

• Radiation Oncology Journal
• /
• v.18 no.3
• /
• pp.200-204
• /
• 2000

Purpose : We already reported the results that aqueous extract of Korean ginseng roots showed a marked cytotoxicity. In this study, we investigated whether combined ginseng product with X-irradiation increase the cytotoxicity of tumor cells than X-irradiation or not. Materials and Methods : Fifty gram of Korean ginseng powder mixed with 1 L of distilled water was extracted with reflux flask under condition of $100^{\circ}C$ for 5 hrs. This aquaous ginseng extract was filtered, centrifuged and then was freezed under condition of $-90^{\circ}C$ for 16-18 hrs. The freezing extract was dried with freeze drier, and then diluted. X-irradiation was given to tumor cells by 6 MeV linear accelerator. The cytotoxicity of ginseng in vitro was evaluated from its ability to reduce the clonogenecity of fibrosarcoma (FSa II) cells. In X-irradiation alone group, each 2, 4, 6 and 8 Gy was given to tumor cells. In X-irradiation with ginseng group, 0.2 mg/mL of ginseng extract was exposed to tumor cells for 1 hour before X-irradiation. Results : The yield for 50 g of ginseng extract which was treated with freezing drier was 3.13 g($6.3\%$). Cytotoxicity In vitro was measured as survival fraction which was judged from the curve, at ginseng concentration of 0.001, 0.01, 0.1 and 1 mg/mL were $0.89\pm0.04$, $0.86\pm0.06$, $0.73\pm0.01$ and $0.09\pm0.02$, respectively. Survival fraction at X-irradiation alone of 2, 4, 6 and 8 Gy were $0.81\pm0.07$, $0.42\pm0.08$, $0.15\pm0.02$, $0.03\pm0.01$, respectively. But, suwival fraction in combined group of X-irradiation and ginseng (0.2mg/ml) at each same radiation dose were $0.28\pm0.01$, $0.18\pm0.03$, $0.08\pm0.02$, $0.006\pm0.002$, respectively (p<0.05). Conclusion : The yield for ginseng extract which was treated with freezing drier was $6.3\%$. Cytotoxicty of Fsa 11 in combined ginseng with X-irradiation group was increased than that of X-irradition alone group, and its enhancing effect seemed to be added.

• Radiation Oncology Journal
• /
• v.21 no.4
• /
• pp.315-321
• /
• 2003

Purpose: This study was peformed to Investigate apoptosis by radiation In the developing fetal rat brain. Materials and Methods: Fetal blains were Irradiated In utero between the 17th and 19th days of fetal life (El7-19) by linear accelerator. A dose of Irradiation ranging from 1 Gy to 4 Gy was used to evaluate dose dependency. To test time dependency the ra)s were Irradiated with 2 Gy and then the fetal brain specimens were removed at variable 41me course; 1, 3, 5, 12 and 24 hours after the onset of irradiation. Immunohistochemlcal staining using in situ 707-mediated dUTP nick end labelling (TUNEL) technlfue was used for apoptotic cells. The cerebral cortex, including three zones on coriicai zone (Cf). Intermediate zone (if), and ventricular zone (VZ), was examined. Results : TUNEL positive cells revealed typical features of apoptotic cells under light microscope In the fetal rat cerebral cortex. Apoptotic cells were not found In the cerebral cortex of non-Irradiated fetal rats, but did appear In the entire cerebral cortex after 1 Gy Irradiation, and were more expensive at the ventricular and Intermediate zones than at the cortical zone. The extent of apoptosis was Increased with Increasing doses of radiation. Apoptosis reached the peak at S hours after the onset of 2 Gy Irradiation and persisted until 24 hours. Conclusion: Typical morphological features of apoplosis by irradiation were observed In the developing fetal rat cerebral cortex. It was more extensive at the ventricular and Intermediate zones than at the cortical zone, which suggested that stem cells or early differentiated cells are more radiosensitive than differentiated cells of the cortical zone.

• The korean journal of orthodontics
• /
• v.25 no.5 s.52
• /
• pp.525-541
• /
• 1995

This study was designed to investigate force systems and tooth movements produced by retraction archwire during retraction of four maxillary incisors after the maxillary canine retraction into the maxillary first premolar extraction space using the computer-aided three-dimensional finite element method. A three-dimensional finite element model, consisting of 2248 elements and 3194 nodes, was constructed. The model consisted of maxillary teeth and surrounding periodontal membranes, .022'$\times$.028'-slot brackets, and 5 types of retraction archwires(.019'$\times$.025' stainless steel archwire) modeled using the beam elements. The contact between the wire and the bracket slot was modeled using the gap elements because of the non-linear elastic behaviors of the contact between them. The forces and moments, End displacements produced by retraction archwire were measured at various conditions to investigate the difference according to types of loops, magnitudes of activation force, gable angle, and anterior lingual root torque. The results were expressed quantitative and visual ways in the three-dimensional method. The following conclusions can be drawn from this study.1. When the tear-drop loop archwire was activated, the mesio-distal and lingual translational movements of the teeth helped to close the extraction space, but unwanted movements of the teeth including intrusions and extrusions, and rotational movements in each direction occurred. 2. Activation of T-loop archwire compared with those of other types of retraction archwires produced the least translational movements of the teeth helped to space closure and also the least unwanted movements of the teeth. 3. Increasing amount of activation in the tear-drop archwire led not only to increase of translational movements of the teeth helped to space closure, but also to increase of unwanted movements of the teeth. 4. Addition of gable bend in the tear-drop archwire helped anterior teeth to translational movements in the mesio-distal direction, but increased unwanted movements of the teeth 5. Addition of anterior lingual root torque in the tear-drop archwire helped central and lateral incisor to improve their facio-lingual inclination, but increased unwanted movements of the teeth.

• The korean journal of orthodontics
• /
• v.41 no.2
• /
• pp.87-97
• /
• 2011

Objective: Facial asymmetry is usually evaluated from the difference in length and angulation of the maxilla and mandible. However, asymmetric position or shape of the condyle can also affect the expression of asymmetry. The purpose of this study was to evaluate the correlation between condylar asymmetry and chin point deviation in facial asymmetry. Methods: Cone-beam CT images of fifty adult skeletal Class III patients were studied. Thirty patients who had more than 4 mm menton deviation were categorized in the asymmetric group. Twenty patients with less than 4 mm menton deviation were assigned to the symmetric group. Anteroposterior and transverse condyle positions were evaluated from the cranial base. The greatest mediolateral diameter (GMD) of the condyle in the axial plane and angulation to the coronal plane were measured. The height and volume of the condyles were evaluated. Results: The symmetric group had no statistical difference between both condyles in position, angulation, GMD, height and volume. In the asymmetric group, the non-deviated side condyle was larger in GMD, height and volume than the deviated side. There was no statistical difference in condyle position and angulation. The GMD, height difference and condylar volume ratio (non-deviated/deviated) were positively correlated with chin deviation. From the linear regression analysis, condylar volume ratio was a significant factor affecting chin deviation. Conclusions: These findings suggests that the non-deviated side condyle is larger than the deviated side. In addition, condylar asymmetry can affect the expression of facial asymmetry.