• Journal of the Korea Society of Computer and Information
• /
• v.15 no.6
• /
• pp.1-9
• /
• 2010

This paper proposes a test method for compliance of SMS encoder and decoder modules with 3GPP (3rd Generation Partnership Project) specification on SMS PDU (Protocol Data Unit). The existing tools have focused on providing an SMS gateway and on helping to view and edit a single SMS PDU, which rarely help to resolve the compliance test problem. The proposed compliance test method is based on an automatic generation of SMS PDUs fully compliant with the 3GPP specification by using QuickCheck library written in Haskell. By applying the proposed method to a C-based SMS encoder and decoder in Linux Mobile platform, we have found out several critical bugs such as wrong interpretation of time stamps in BCD format. The automatic SMS PDU generator is reusable in that it only depends on the 3GPP SMS specification. The QuickCheck library is also applicable for testing other network protocol data encoders and decoders, as used in this paper.

• Journal of Power System Engineering
• /
• v.3 no.2
• /
• pp.70-78
• /
• 1999

The vector controlled induction motor(I.M) with speed sensor has been widely used for variable speed drive systems. In these application fileds, speed sensorless control are expected strongly to progress reliability, simplicity and cost performance of I.M and to expand its application part. This paper describes a novel speed sensorless control method of I.M based on feedforward quick torque response control technique. Especially, this paper aimed at the realization of sensorless control in the very low speed region, The proposed method can be formulated simply from a motor circuit equation and conducted easily by detecting primary motor currents and a voltage command at every sampling time. Throughout some results of numerical simulations with the assumption of using a pulse width modulation(PWM) voltage source inverter, the validity of the method was successfully confirmed.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.41 no.6
• /
• pp.97-104
• /
• 1999

An experimental investigation was carried out to study the feasibility of using the stabiliozed sludge, as a backfill and cutoff-water materials for embankment structures. For stabilizing of sludge, hydrated lime and quick lime were used as additive, and a series of tests were performed on the sludge and the stabilized sludge to examine their physical and mechanical properties , compaction, compressive strength, hydraulic conuctivity and consolidation characteristics. From the test results, physical and mechanical properties of the stabilized sludge were improved as compared with the sludge. Especially from the viewpoint of physcial property, consolidation or settlement and cutoff-water, quick lime is more effective than the hydrated lime as a stabilization addtive. But, viewpoint of compaction and shear strength, hydrated lime is more effective than the quick lime as a atabilization additive. As a result of this study, it was found that the stabilized sludge can be developed the backfill and cutoff-water materials, improved the stabilizing method of sludge.

• 유체기계공업학회:학술대회논문집
• /
• 2003.12a
• /
• pp.508-513
• /
• 2003

A quick injection agitator is used to mix working fluids. In this study, numerical analyses are carried out to investigate the performance of a quick injection agitator with different gaps between the impeller and vacuum enhancer. A commercial CFD code is used to compute the 3-D viscous flow field within the impeller of agitatior. Numerical results are graphically depicted with different gaps. Special attention is paid to the following topics: pressure distribution, velocity gradient, volume fraction.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.03a
• /
• pp.505-512
• /
• 1999

Soft marine clay deposits pose several foundation problems. Generally, lime stabilization is used worldwide for solidifying of soft marine clay deposits. In this paper, a series of laboratory tests were conducted to verify clay-lime reaction. A clay was collected from Pusan, which was mixed with various quantities of quick lime and slaked lime. Various compounds produced by clay-lime reaction were identified by X-ray diffraction analysis. The physico-chemical properties of the clay were also investigated. Compounds such as calcium silicate hydrate (CSH), calcium aluminate hydrate (CAH), calcium aluminate (CA), hillebrandite, and gehlenite were identified. It is likely that such compounds were mainly produced by pozzolanic reaction. Based on the change of physico-chemical properties obtained by the reaction, the water content was considerably decreased when lime was added to the clay. In addition, unconfined strength was increased. In the other hand, quick lime was more effective than slaked lime in decreasing and increasing of the water content and unconfined strength, respectively. Fewer cracks were produced when the clay was mixed with quick lime. It is suggested that these beneficial changes produced by the mixing of the clay and lime depend on the properties of compounds obtained by chemical reaction.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.267-269
• /
• 1996

Servo systems became indispensable to applications such as industrial robots and numerically controlled machinery. Especially, induction motor drives are widely used as ac-servo system owing to the fact that it is maintenance-free. At the present time, Quick torque control methods such as vector control have been employed that enables an induction motor to attain as quick torque response as a dc motor. However, these methods can not be realized without knowing several motor parameters accurately, because the methods need them to calculate flux or voltage command. Most of all, secondary resistance has to be identified accurately, because it's value varies greatly for operation of induction motors. In this paper, a new identification method of secondary resistance based on quick torque control system of induction motors is proposed. The proposed method is derived theoretically from motor circuit equation and can be realized very simply by detecting primary current and voltage command of the motor. Through the numerical simulation considered using PWM inverter, the validity of the proposed method was successfully confirmed.

• The Journal of Society for e-Business Studies
• /
• v.11 no.1
• /
• pp.127-144
• /
• 2006

This paper presents Web service based ASP (WS-ASP) model for QR(Quick Response) system, supply chain management system in the textiles and clothing industry. The Korean textiles and clothing industry is mostly composed of medium and small-sized companies, which are not capable of recruiting If specialists and making a large scale investment in IT. ASP model not only let them obtain QR system at relatively low usage cost, but also take higher vendor risk due to high dependency. This paper argue that WS-ASP model is appropriate for QR systems by complimenting ASP model with lower vender risk, which results from re-integrating software-on-demand services distributed to several QR specialized WS-ASP vendors.

• Journal of Electrochemical Science and Technology
• /
• v.14 no.4
• /
• pp.369-376
• /
• 2023

The quick-charging performance of SiO electrodes is evaluated with a focus on solid electrolyte interphase (SEI)-reinforcing effects. The study reveals that the incorporation of fluoroethylene carbonate (FEC) into the SiO electrode significantly reduced the electrode fatigue, which is from the the viscoelastic properties of the FEC-derived SEI film. The impact of FEC is attributed to its ability to minimize the mechanical failure of the electrode caused by additional electrolyte decomposition. This beneficial outcome arises from volumetric stain-tolerant characteristics of the FEC-derived SEI film, which limited exposure of the bare SiO surface during 0.5 C-rate cycling. Notably, FEC greatly improves Li deposition during quick-charge cycles following aging at 0.5 C-rate cycling due to its ability to maintain a strong electrical connection between active materials and the current collector, even after extended cycling. Given these findings, we assert that mitigating SEI layer deterioration, which compromises the electrode structure, is vital. Hence, enhancing the interfacial attributes of the SiO electrode becomes crucial for maintaining kinetic efficiency of battery system.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.296-297
• /
• 2011

Many applications involving induction motors that are controlled using variable frequency drives require the ability to stop quickly. These applications include emergency stops, quick stopping of fans, centrifuges, presses, etc. The technique that is widely accepted in the industry for achieving quick stopping makes use of brake resistors in series with a power semiconductor switch. The switch-resistor combination (brake-unit) is applied across the dc bus. The fastest decelerating time achievable depends on the size of the resistors and the switch employed. In this paper, the authors propose a novel method of achieving quick stopping times without the use of any brake-unit. Experimental test results with and without this method on a large inertia motor-load combination show that the proposed stopping method is able to reduce the stopping time significantly compared to normal decelerated stop without the need for a braking unit.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.502-505
• /
• 2008

Due to continuous difficulty of human power supply, it is necessary to develop an equipment which is good to saving cost and time at a construction site. A quick pipe coupling method is the kind of mechanical joint system using split-sleeve and sealing-pad at pipe groove without welding. In hence, it provides restrained pipe joint which is simple, safe, and dependable without environmental pollutions. It is more useful scheme than the other ones. The purpose of this study is to find out the main design factors and the optimum shape of split-sleeve. The stress analyses were carried out under various shapes of pipe groove configuration, materials and internal pressures with a commercial software, ANSYS workbench which uses FEM(finite element method). Results are graphically depicted with various parameters.