• Korean Journal of Remote Sensing
• /
• v.23 no.1
• /
• pp.15-20
• /
• 2007

This study is to apply QuickBird satellite image for the simulation of storm runoff in a small rural watershed. For a $1.05km^2$ watershed located in Goesan-Gun of Chungbuk Province, the land use from the QuickBird image was produced by on-screening digitising after ortho-rectifying using 2 m DEM. For 3 cases of land use, soil and elevation scale (1:5,000, 1:25,000 and 1:50,000), SCS-CN and the watershed physical parameters were prepared for the storm runoff model, HEC-HMS (Hydrologic Modelling System). The model was evaluated for each case and compared the simulated results with couple of selected storm events.

• Textile Coloration and Finishing
• /
• v.34 no.3
• /
• pp.146-156
• /
• 2022

In this study, the dyeing properties of double knit fabric composed of PET/PTT bi-component fiber and quick dry fiber were examined with disperse dyes. In addition, the shrinkage characteristics were investigated during the dyeing process. The K/S values and shrinkage rate of PET/PTT bi-component fiber were higher than those of PET/co-PET bi-component fiber and quick dry fiber. In the dye bath, dye migration of exhausted on PET/PTT bi-component fiber to quick dry fiber was found at high dyeing temperature. It was not found that there was a significant difference in K/S value on dyeing temperature between 115℃ and 130℃. But the slight color difference of two sides of a double knit fabric was found.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.147-150
• /
• 2010

Ionopheric deley is the largest error sources in GNSS positining. The single frequency receiver user needs an ionospheric model like the Klobuchar model or NeQuick model to eliminate the ionospheric error. In this study we estimated VTEC(Vertical Total Electron Content) over DAEJ station using the two models in each season. We compared the results with Global Ionosphere Maps and International Reference Ionosphere model predictions. As a result, the NeQuick model was more accurate than Klobuchar model.

• Journal of the Korean Home Economics Association
• /
• v.46 no.2
• /
• pp.51-58
• /
• 2008

The purpose of this study was to analyze how the appreciation or recognition of quick response systems, with the utilization of technology, can improve operations for businesses in the DongDaeMoon fashion market. A survey was conducted from April 25 to May 10 in 2007, among owners and designers of wholesale shops in the DongDaeMoon fashion market. Data was collected from 270 subjects, and general descriptive and comparative statistical analysis was applied to acquire various parameters. Firstly, the product types within the DongDaeMoon fashion market were small and medium quantity batch production systems. The majority of businesses adopted the production strategy of outsourcing through subcontracted factories. To re-order, a fashion merchandising required 2 to 3 days. Secondly, the design sources of fashion merchandises were national fashion brands, popular items within the same industries, and also fashion magazines. New products was made within 4 days after a sample item was received. Business acquaintances were fashion retail shops of DongDaeMoon, and internet or home shopping companies. Thirdly, the recognition of importance and effects of quick response systems was difference between high and low group of the utilization of technology in the DongDaeMoon fashion market.

• Transactions on Control, Automation and Systems Engineering
• /
• v.3 no.3
• /
• pp.196-202
• /
• 2001

Quick evaluations of two in-plane orbit maneuvers using small sets of real-time GPS navigation solutions were performed for the KOMPSAT-1 spacecraft operation. Real-time GPS navigation solutions of the KOMPSAT-1 were collected during the Korean Ground Station(KGS) pass. Only a few sets of position and velocity data after completion of the thruster firing were used for the quick maneuver evaluations. The results were used for antenna pointing data predictions for the next station contact. Normal orbit maneuver evaluations using large sets of playback GPS navigation solutions were also performed and the result were compared with the quick evaluation results.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.458-458
• /
• 2000

Quick evaluations of two in-plane orbit maneuvers using small see of real-time CPS navigation solutions were peformed lot the KOMPSAT-1 spacecraft operation. Real-time GPS navigation solutions of the KOMPSAT-1 were collected during the Korean Ground Station(KGS) pass. Only a few sets of position and velocity data after completion of the thruster firing were used for the quick maneuver evaluations. The results were used for antenna pointing data predictions for the next station contact. Normal orbit maneuver evaluations using large see of playback GPS navigation solutions were also performed and the result were compared with the quick evaluation results.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.11a
• /
• pp.295-301
• /
• 2004

Satellite captures images periodically and economically over the area wider than aerial photographs, and reconnaissance to unapproachable area. For these advantages, mapping using high resolution satellite image has high potentials of marketability and development. Therefore, utilization of satellite image in mapping and GIS is expected to be growing and research on describable feature, positional accuracy and, possible mapping scale is urgently needed. This research presented that Quick Bird orthoimage could be used to update digital map on a scale of 1:5,000. Quick Bird image was corrected geometrically based on ground control points. DEM was generated using height data of digital topographic map. The orthoimge was produced by digital differential rectification based on DEM which was generated using height data of digital topographic map(scale 1;5,000 and 1;1,000). When the digital topographic map was overlaid with the orthoimage, it was very easy to find changed region or new features builded after the map compiled.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2017.07a
• /
• pp.178-179
• /
• 2017

우리나라의 최대 철강회사인 포스코는 2005년부터 품질개선을 위해서 포스코 자체의 혁신방법론인 QSS+(Quick Six Sigma)을 개발하여 실시하고 있다. QSS+는 회사 전체 직원이 개선 실천 학습을 하고, 지속적인 낭비제거를 통해 부가가치를 창출하는 활동으로 '일상개선 활동, 과제 활동, 솔선/격려활동, 인재양성' 4개의 축으로 운영되고 있다. 또한 QSS+는 오랜 시간에 걸쳐 정착되어 정부 기관, 기업, 그룹사, 외주파트너사, 공급사 및 다양한 분야에서 우수 혁신 활동 사례로 벤치마킹을 실시하고 있다. 매년 현장에서 활동하는 포스코 QSS+ 현 수준을 정확히 판단하고 향후 방향성을 제시하는 QSS+ 충실도 평가 기준을 개선하기 위하여 AHP 분석 방법을 통해 평가 항목을 분석하고 현장이 반영된 'QSS+ 평가 기준'을 제시하고자 한다.

• Proceedings of the KSR Conference
• /
• 1999.05a
• /
• pp.383-389
• /
• 1999

This paper is a study on the improvement effects by quick lime pile through theoretical analysis and in-situ construction test. Effects of strength increase is studied to verify the improvement effects of soft ground arounding quick lime pile. First, engineering characteristics of quick lime and ground was studied, in the second place, laboratory test(consolidation test, triaxial compression test) and in-situ test(portable cone penetration test, vane test) were peformed for verification of strength increase of adjacent ground. Finally, the results of in-situ test were compared with those of theorecal study. From in-situ test results, strength at 28th curing days(6.11-6.55t/㎡) was twice as great as strength before improvement(3.06t/㎡) and was slightly greater than theoretical value(4.95t/㎡).

• Journal of Biosystems Engineering
• /
• v.40 no.3
• /
• pp.271-276
• /
• 2015

Purpose: Quick freezing is widely used in commercial food storage. Well-known freezing techniques such as individual quick freezing require a low-temperature coolant and small cuts for the heat-transfer efficiency. However, the freezing method for bulk food resembles techniques used in the 1970s. In this study, electromagnetic (EM) heating was applied to improve the quick freezing of bulk food. Methods: During freezing, the surface of food can be rapidly cooled by an outside coolant, but the inner parts of the food cool slowly owing to the latent heat from the phase change. EM waves can directly heat the inner parts of food to prevent it from freezing until the outer parts finish their phase change and are cooled rapidly. The center temperature of garlic cloves was probed with optical thermo sensors while liquid nitrogen (LN) was sprayed. Results: When EM heating was applied, the center cooling time of the garlic cloves from freezing until $-10^{\circ}C$ was 48 s, which was approximately half the value of 85 s obtained without EM heating. For the white radish cubes, the center cooling time was also improved, from 288 to 132 s. The samples frozen by LN spray with EM heating had a closer hardness to the unfrozen samples than the samples frozen by LN only. Conclusions: The EM heating during quick freezing functions to maintain the hardness of fresh food by reducing the freezing time from 0 to $-10^{\circ}C$.