• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.1A
• /
• pp.8-18
• /
• 2011

Visible light communication (VLC) using optical sources which can be simultaneously utilized for illumination and communication is currently an attractive option for wireless personal area network. Improving the data rate in optical wireless communication system is challenging due to the limited bandwidth of the optical sources. In this paper, we design the singular value decomposition (SVD)-based multiplexing multi-input multi-output (MIMO) system to support two data streams in optical wireless channels. In order to improve the spectral efficiency, the rate adaptation using multi-level pulse amplitude modulation (PAM) is applied according to the channel condition and we propose the method to allocate the optical power, the offset and the size of modulation scheme theoretically under the constraints of the nonnegativity of the modulated signals, the aggregate optical power and the bit error rate (BER) requirement. The simulation results show that the proposed allocation method gives the better performance than the method to allocate the optical power equally for each data stream.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.5
• /
• pp.14-22
• /
• 2013

In this study, we investigated retention characteristics of nanocoated GCC that was positively modified by Layer-by-Layer (LbL) multilayering process. Three layers were formed onto GCC particles with poly-DADMAC/PSS/poly-DADMAC (PD3) and C-starch/A-PAM/C-starch (CS3) systems, respectively. Untreated GCC, PD3 GCC (strongly positive charge) and CS3 GCC (weekly positive charge) were retained on pulp fibers under single retention system or microparticle retention system conditions. In single retention system, PD3 particles were not affected by cationic retention aid due to their strong positive charge, whereas CS3 particles reacted with cationic retention aid due to anionic sites on the surface of the weekly positive particles. In a microparticle retention system, positively modified GCC (PD3 and CS3) showed higher retention level than untreated GCC at the same dosage of retention aid. The cationic surface of GCC particles were more reacted with bentonite so the deposition onto pulp fibers was improved. In addition, the retention level of nanocoated GCC was increased with maintaining good formation.

• Childhood Kidney Diseases
• /
• v.15 no.1
• /
• pp.29-37
• /
• 2011

To understand the course of renal diseases well, we must have basic knowledges of histologic procedures of renal biopsy samples as well as basic pathologic changes. This article describes the method of dividing the biopsy samples, fixatives for various pathologic examinations and basic pathologic changes of glomerular diseases. For light microscopic examination, color changes of glomerular structures in PAS, trichrome and PAM stains, normal glomerular patterns compared to various glomerulopathies are introduced. While describing typical staining patterns and intensities of fluorescence in membranous glomerulopathy and IgA nephropathy, basic interpretation of immunofluorescent microscopic examination is described. To understand electron microscopic pictures of renal diseases, preference locations of electron dense deposits in various glomerulonephrites are described with schema. This article is the introduction part of the renal pathology and for the further detail changes of specific entities, we should reference the renal pathology textbooks or articles.

• Journal of Microbiology and Biotechnology
• /
• v.30 no.10
• /
• pp.1583-1591
• /
• 2020

CRISPR/Cpf1 has emerged as a new CRISPR-based genome editing tool because, in comparison with CRIPSR/Cas9, it has a different T-rich PAM sequence to expand the target DNA sequence. Single-base editing in the microbial genome can be facilitated by oligonucleotide-directed mutagenesis (ODM) followed by negative selection with the CRISPR/Cpf1 system. However, single point mutations aided by Cpf1 negative selection have been rarely reported in Corynebacterium glutamicum. This study aimed to introduce an amber stop codon in crtEb encoding lycopene hydratase, through ODM and Cpf1-mediated negative selection; deficiency of this enzyme causes pink coloration due to lycopene accumulation in C. glutamicum. Consequently, on using double-, triple-, and quadruple-base-mutagenic oligonucleotides, 91.5-95.3% pink cells were obtained among the total live C. glutamicum cells. However, among the negatively selected live cells, 0.6% pink cells were obtained using single-base-mutagenic oligonucleotides, indicating that very few single-base mutations were introduced, possibly owing to mismatch tolerance. This led to the consideration of various target-mismatched crRNAs to prevent the death of single-base-edited cells. Consequently, we obtained 99.7% pink colonies after CRISPR/Cpf1-mediated negative selection using an appropriate single-mismatched crRNA. Furthermore, Sanger sequencing revealed that single-base mutations were successfully edited in the 99.7% of pink cells, while only two of nine among 0.6% of pink cells were correctly edited. The results indicate that the target-mismatched Cpf1 negative selection can assist in efficient and accurate single-base genome editing methods in C. glutamicum.

• Transactions of Materials Processing
• /
• v.29 no.4
• /
• pp.203-210
• /
• 2020

In this study, formability and springback behavior of 1.5 GPa grade ultra-high strength steel (UHSS) sheet were predicted through the finite element simulation, and structural stability of the forming dies was verified by the coupled forming-structural analysis. Uniaxial tension and uniaxial tension-compression tests were performed to obtain experimental data for modeling the springback properties of the sheet material. The springback values predicted by simulation were compared with those from actual measurements. The results calculated from the kinematic hardening model were found to be much more accurate than those from the isotropic hardening model. Deformation of the forming die and springback of the product were calculated by the coupled forming-structural analysis. The higher the strength of the die material, the smaller the surface displacement of the die and the springback of the product. The internal stresses of the dies made of three materials, FC300, FCD550 and STD11 were compared with the yield stress of each material. The results provided a basis for determining the most suitable material for each part of the die set. As a result, simulation techniques have been established for predicting formability and springback in the UHSS sheet forming process.

• Journal of Sensor Science and Technology
• /
• v.15 no.1
• /
• pp.58-64
• /
• 2006

In this study, we describe a low-temperature wafer-level thermocompression bonding using electroplated gold seal line and bonding pads by electroplating method for RF-MEMS devices. Silicon wafers, electroplated with gold (Au), were completely bonded at $320^{\circ}C$ for 30 min at a pressure of 2.5 MPa. The through-hole interconnection between the packaged devices and external terminal did not need metal filling process and was made by gold films deposited on the sidewall of the throughhole. This process was low-cost and short in duration. Helium leak rate, which is measured to evaluate the reliability of bonded wafers, was $2.7{\pm}0.614{\times}10^{-10}Pam^{3}/s$. The insertion loss of the CPW packaged was $-0.069{\sim}-0.085\;dB$. The difference of the insertion loss between the unpackaged and packaged CPW was less than -0.03. These values show very good RF characteristics of the packaging. Therefore, gold thermocompression bonding can be applied to high quality hermetic wafer level packaging of RF-MEMS devices.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.3 no.2
• /
• pp.86-92
• /
• 2005

Purpose: The main cause of death due to acute organophosphate (OP) poisoning is believed acute respiratory failure caused by cholinergic reactions. Recently, advances in respiratory and intensive care make it possible to maintain the respiratory function of patients with OP poisoning, but the mortality rates remain high. The present study clarified the hemodynamics of patients with acute lethal OP poisoning. The purpose of this study was to analyse the outcomes and predictors of mortality in patients with acute OP poisoning requiring intensive care. Methods: We reviewed medical and intensive care records of patients with acute OP poisoning admitted to emergency department and ICU between March 1998 and Aug 2005. We collected patient information regarding poisoning, clinical, and demographic features. Results: During the study period, 67 subjects treated with intensive care and ventilator management in addition to gastric decontamination standard therapy with atropine and 2-PAM. Of 67 patients, 13 died. Kaplan-Meier survival analysis demonstrated a steep decline in the cumulative survival to $86.6\%$ during the first week. Mean arterial pressure < 60 mmHg within the first 24 hours was recognized as a poor prognostic indicators among mechanical ventilated patients. Conclusion: Most OP poisoning-related deaths occurred within the first week of poisoning. Mean arterial pressure lower than 60 mmHg might be the best predictor of poor outcome. We speculated that the refractory hypotension is the leading cause of death in patients with lethal OP poisoning that receiving mechanical ventilation and maximal supportive care.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.7
• /
• pp.711-716
• /
• 2012

The purpose of this study was to investigate how the modulation method affects the effectiveness of eliciting tactile sensations by electrical stimulation. Two methods were employed and the results were compared and analyzed; pulse amplitude modulation (PAM) and pulse width modulation (PWM). Thirty-five healthy subjects participated in the experiments to measure the stimulation intensity that began to elicit a tactile sensation - activation threshold (AT). Constant-current monophasic rectangular pulse trains were employed, and the stimulation intensity was varied from zero until the subject felt any uncomfortable sensation. The step size of the stimulation intensity was 100nC/pulse. After each experiment, the subject described the sensation both quantitatively and qualitatively. The two modulation methods did not make a significant difference as far as the AT values were concerned, but most of the subjects showed 'intra-individual' consistency. Also, it was confirmed that our range of the stimulation parameters enabled us to obtain three major tactile sensations; tickling, pressure and vibration. The results suggested that the stimulation parameters and the modulation type should be selected for each individual and that selective electrical stimulation of the mechanoreceptors needs more diversified researches on the electrode design, multi-channel stimulation protocol, waveforms of the pulse train, etc.

• Journal of Marine Bioscience and Biotechnology
• /
• v.5 no.4
• /
• pp.40-45
• /
• 2011

Microalgae are one of the major, sustaining components of ecosystem processes and are responsible for biogeochemical reactions that drive our climate changes. Despite this, many marine microalgae are poorly described and little is known of their abundance and distribution along the coastal areas of Sooyoung Bay, Busan, South Korea. The present study has been conducted from November, 2011 to August, 2009 with the objective to provide an overview of the taxonomy diversity and abundance of microalgae along the coastal areas of the Sooyoung Bay. Water samples were collected from different sites, which were located by using a GPS tracker. Chlorophyll fluorescence of the water samples were measured by using ToxY-PAM dual-channel yield analyzer. The chlorophyll fluorescence values were relatively higher during the spring and summer and even in the region near to the sea port. Similarly the abundance of microalgae was higher near the port but diversity index had lower values. The temperature and pH values were same at all the sites. However, only the temperature varied during the sampling period, with higher values during summer and lower in winter. From the preliminary results, the following class of microalgae were found; Bacillariophyceae, Dinophyceae, Silicoflagellate and Cryptophyceae. With a future ongoing work, microalgae are being isolated to establish single cell culture and for identification using light microscopic observations, photography and molecular approaches.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.9
• /
• pp.1749-1754
• /
• 2007

In this paper, we propose a new Intra-body communication system for bio-sensor which is one of applications in PAN(Personal Area Network) using body channel. The communication systems for bio-sensor network usually transmits a lot of data acquired in sensor to the receiver in wrist or waist. So we deign the intra-body modem with high data rate, low power, and small size which are achieved by baseband communication techniques. It is noted that the baseband transmission does not requires any analog IF and RF frontends, and can be operated in lower frequency than bandpass transmission. The proposed modem operates at 10MHz band according to the characteristics of intra-body channel, and shows the capability of 5Mbps data rate at distance of 20cm, with $BER=10^{-5}$. In addition, we implement the modem within $2{\times}2cm$ area.