• 한국압력기기공학회 논문집
• /
• 제17권2호
• /
• pp.75-82
• /
• 2021

The 3D printing technology is one of the fourth industrial revolution technology that drives innovation in the manufacturing process, and should be applied to nuclear industry for various purposes according to the manufacturing trend change. In nuclear industry, it can be applied to manufacture obsolete items and new designed parts in advanced reactors or small modular reactors (SMRs), replacing the traditional manufacturing technologies. A gate valve body was manufactured, which was obsolete in nuclear power plant, using DED(Directed Energy Deposition) metal 3D printing technology after restoring design characteristics including 3D design drawing by reverse engineering. The 3D printed valve body was assembled with commercial parts such as seat-ring, disk, stem, and actuator for performance test. For the valve assembly, including 3D printed valve body, several tests were performed, including pressure test, end-loading test, and seismic test according to KEPIC MGG and KEPIC MFC. In the pressure test, hydraulic pressure of 391kgf/cm² was applied to 3D printed valve body, and no leak was detected. Also the 3D printed valve assembly was performed well in end-loading and seismic tests.

• 인터넷정보학회논문지
• /
• 제19권2호
• /
• pp.43-48
• /
• 2018

Various artifacts that are produced as software R&D project progresses contain research plan, research report, software requirements and design descriptions, etc. When conducting a software R&D project, it is necessary to confirm that the developed system has implemented its research requirements well. However, various research results make it difficult to design appropriate tests. So, there is a practical need for us to comprehensively handle the planning, execution, and reporting of software test for finding and verifying information related to the research. In this paper, we propose a useful method for software test process in R&D project which supports model based software testing. The proposed method supports automation of test design and generation of test data by explicitly separating each step of System Under Test (SUT). The method utilizes the various models representing the control flow of the function to extract the information necessary for testing the system. And it supports a systematic testing process based on TMMi and ISO 29119. Finally, we show the validity of the method by implementing a prototype with basic functionality to generate test data from software behavioral models.

• International Journal of Aeronautical and Space Sciences
• /
• 제18권1호
• /
• pp.63-69
• /
• 2017

In this paper, composite laminate pull-through resistance was analyzed using the FEM method and compared with test results. 2D and 3D simplified FEM models, a nonlinear analysis, and a progressive failure analysis utilizing three composite laminate failure theories Maximum Stress, Maximum Strain, and Tsai-Wu were used to predict the FEM results with the test results. The load and boundary conditions of the test were applied to the FEM to simulate the test. A composite laminate pull-through test (ASTM D7332 Proc. B) was designed with a special fixture to collect more precise data. The test results were compared with the FEM analysis results.

• Journal of Korean Biological Nursing Science
• /
• 제18권3호
• /
• pp.185-191
• /
• 2016

Purpose: The purpose of this study is to understand the effect of taking calcium/vitamin D supplements and performing Taekkyeon exercises on the frailty of the elderly targeting a vulnerable senior social group. Methods: A total of 124 people aged 65 and older consisting of 60 persons in the experimental group, and 64 persons in the control group participated in this study, and this study is a non-equivalent control group pre/post-test design quasi-experimental study. This study analyzed the homogeneity between the experimental group and the control group using a chi-square test and t-test while analyzing the difference in the degree of frailty and bone density with the practice of Taekkyeon and a calcium agent using t-test and GEE. Results: The study results showed that the frailty and bone density of the experimental group significantly improved. Conclusion: Through this study, it was confirmed that calcium/vitamin D intake and Taekkyeon exercises were an effective intervention which strengthened the elderly's physical condition.

• 방송공학회논문지
• /
• 제20권6호
• /
• pp.901-911
• /
• 2015

최근 3D 디스플레이 환경들이 확대되면서 컴퓨터와 3D 디스플레이 장치들을 통해 개인의 입체 시력을 검사하려는 다양한 시도들이 제안되었다. 기존의 입체검사도구들에 비해 3D 디스플레이를 이용한 입체 시력 검사는 여러 장점들을 갖고 있지만, 3D TV나 모니터에서는 최소로 조작할 수 있는 양안시차의 한계가 1픽셀이다. 관찰거리가 짧은 pc 환경에서는 1 픽셀의 양안 시차 값은 정상 입체 시력을 구분해 낼 수 있는 기준보다 너무 크다. 본 연구에서는 이러한 문제를 극복하고자 가보 자극을 사용하여 1픽셀보다 작은 단위의 양안 시차를 제공할 수 있는 입체 검사 자극을 생성한 후 이 자극이 입체 시력 검사자극으로 적용가능한 지를 탐색적으로 살펴보았다. 넓은 범위의 시차를 1회만 측정하는 기존의 입체 시력 검사 대신에 좁은 범위의 시차 값에 대해 조건 당 10번의 반복 측정을 실시하여 각 개인별 정답률을 구하였다. 가보 영상을 사용한 검사결과의 신뢰도와 타당도를 살펴보기 위해 기존 입체 시력 검사에 사용되는 무선점 입체 자극을 이용한 검사 결과와 가보 영상을 이용한 검사결과를 비교하였고 그 결과 온건한 정도의 상관관계를 보여주었다. 또한 검사 결과가 얼마나 신뢰도운지를 평가하기 위해 약 1개월 후에 동일한 환경에서 가보 영상을 이용하여 입체 시력을 측정한 후, 두 검사 결과를 비교한 결과 높은 검사-재검사 신뢰도를 보였다. 이러한 결과는 가보 자극을 사용하여 입체 검사 도구를 개발하는 경우 충분히 신뢰로운 결과를 산출할 수 있음을 시사하는 것으로, 가보 자극은 충분한 관찰거리가 제공되지 않거나 혹은 매우 정밀한 단위로 입체 시력을 평가할 필요가 있는 상황에서 개인의 입체 시력을 평가하기에 적절한 자극임을 보여준다.

• 시스템엔지니어링학술지
• /
• 제16권2호
• /
• pp.87-96
• /
• 2020

In this paper we proposed the test design method of reliability growth management. First, we presented the process for establishing the reliability growth management test design considering the number of failures and the termination test time. Reliability growth analysis of continuous system was performed in accordance with the test design process presented. In case the reliability test result is not met with the reliability target value after more than three failures occurred, the required test times were analyzed that 1,725 hrs for one corrective action, 1,950 hrs for two corrective actions. If the number of failures is less than three, design a reliability demonstration test according to confidence level 80% and 90% was performed using RGA 11 Software. As a result, it is possible to establish the reliability growth management test design with sufficient use of available resources. The results of this study can be used when establishing a test design for assessment of reliability growth management of all continuous systems.

• 한국군사과학기술학회지
• /
• 제20권6호
• /
• pp.844-852
• /
• 2017

Since guided weapon is high-cost and one-shot device which is non-reusable, it requires a lot of resources to prove required accuracy as a part of reliability demonstration. Once a test for proving accuracy rate of guided missile fails, it causes an additional cost and delay of schedule. This study introduces an equation for proper sample size and plan for guided-missile accuracy rate test in order to minimize the risk of test failure. Proper sample size for the test is derived by considering the reliability growth. Furthermore, each task for accuracy rate test is defined according to the development step. Therefore, this study can contribute to reduce sample size for accuracy rate test in order to meet the reliability requirement and assure transparency in the test process.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권2호
• /
• pp.1217-1233
• /
• 2017

Effective monitoring and testing during each step are essential for document verification in research and development (R&D) projects. In software development, proper testing is required to verify it carefully and constantly because of the invisibility features of software. However, not enough studies on test processes for R&D projects have been done. Thus, in this paper, we introduce a Test Maturity Model integration (TMMi)-based software field R&D test process that offers five integrity levels and makes the process compatible for different types of projects. The Software & Systems Process Engineering Metamodel (SPEM) is used widely in the software process-modeling context, but it lacks built-in enactment capabilities, so there is no tool or process engine that enables one to execute the process models described in SPEM. Business Process Model and Notation (BPMN)-based workflow engines can be a solution for process execution, but process models described in SPEM need to be converted to BPMN models. Thus, we propose an approach to support enactment of SPEM-based process models by converting them into business processes. We show the effectiveness of our approach through converting software R&D test processes specified in SPEM in a case study.

• 품질경영학회지
• /
• 제50권4호
• /
• pp.831-842
• /
• 2022

Purpose: This study carried out the Quality by Design (QbD)6σ process to verify the effectiveness and equivalence of the finished D-antigen quantitative test method, and compared the OFAT-based method validation and test result acceptance criteria with the Analytical Quality by Design (AQbD)-based method validation and test method. This is a study on how to reduce the risk of delay in permit change by increasing the reliability of permit data in the existing method by statistically analyzing the results. Methods: With the QbD6σ process, the effectiveness and equivalence of the D-antigen quantitative test method were verified with the data of the existing test method and the new test method. Results: Method validation tests are performed based on AQbD. Critical Method Parameters are identified through risk assessment, and single/combined actions are verified by designing and performing tests for Critical Method Parameters (analysis of variance, full factorial design method). Method validation can be effectively accomplished with the QbD6σ process. Conclusion: The use of QbD6σ can be used to achieve satisfactory results for both pharmaceutical companies and regulators by using appropriate statistical analytical methods for method validation as required by regulatory agencies.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2018년도 전력전자학술대회
• /
• pp.308-309
• /
• 2018

This paper proposes new D/A(Digital to Analog) Design method for improving accuracy in high-performance test equipment. The proposed new D/A design can improve accuracy of the equipment even with low-resolution D/A converters. The validity of proposed D/A design is verified by analysis and experiment.