• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.2074-2076
• /
• 2000

In this paper, RFICP equipment is designed and manufactured with the aid of high frequency discharge to produce uniform plasma with high density and large diameter. And $SF_6$ gas is used to investigate plasma characteristics. The electron density and temperature, potential dependence of $SF_6$ plasma in accordance with its operating pressure, gas flux and input power are measured by the method of Langmuir probe. The etching characteristics of the plasma is researched in accordance with operating pressure, gas flux, input power to apply to Silicon Wafer which is used in the field of semiconductor process. The proposed RFICP equipment, in this paper, has relatively excellent etching characteristics, and is thought to be element of oxidization-sheath etching facility in semiconductor manufacturing process.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.9
• /
• pp.103-109
• /
• 2006

This research is contents about output characteristic of optic current sensor that use faraday effect. optic current sensor used in an experiment is consisted of three parts.(1) Source of light used laser diode of 1310[nm].(2) Sensor section manufactured circularly according to gas insulated switchgear. And $9/125[{\mu}m]$ standard single mode optical fiber for communication was installed winding 20 [turn] on sensor section core surroundings of diameter 31 [cm].(3) Electrical signal of PD(Photo detector) is collected using NI company's 16bit DAQ board via terminal block. Collected data analyzed by different three signal processing methods. NI company's $Labview^{TM}$ was used to signal processing software. As a result, In signal processing of optic current sensor, we could know that noise greatly more influences the error generation than fluctuation of light intensity. also, 1 class CT(current transformer) manufacture that have error rate less than 1[%] was available by removing these

• Journal of Veterinary Clinics
• /
• v.12 no.1
• /
• pp.897-904
• /
• 1995

Two giant pandas, which come from China have been roared in Yong-in Farmland zoo since 1994. One of them, which is female and 2 years old showed anorexia, mucous diarrhea and severe abdominal pain. It revealed neutrophilia and hypokalemia which suggested inflammation and loss of electrolytes by diarrhea. The mucous material contained intestinal mucoid epithelim which was infected Gram negative bacilli and infiltrated with neutrophils. The antibacterial therapy with nafcillin and ampicillin was not successful. Yersinia entrocolitica was implicated as a causative organism in the occurrence of bacterial enteritis. This organism had resistance to ampicillin, chlorampenicol, cefalothin, tetracycline, trimetoprim-sul-famethoxazole, erythromycin, gentamicin, kanamycin, carbanicillin and danofloxacin. It responded to the simultaneous administration of cefopherazone, flunixin-meglumine, physiological saline, Lactate Rainger's solution, sodium bicarbonate, KCL and vitamins and recovered after a period of 30days.

• Journal of Mechanical Science and Technology
• /
• v.17 no.5
• /
• pp.776-783
• /
• 2003

A low speed wind tunnel test was conducted for full-scale model of an unmanned aerial vehicle (UAV) in Korea Aerospace Research Institute (KARI) Low Speed Wind Tunnel(LSWT). The purpose of the presented paper is to illustrate the general aerodynamic and performance characteristics of the UAV that was designed and fabricated in KARI. Since the testing conditions were represented minor portions of the load-range of the external balance system, the repeatability tests were performed at various model configurations to confirm the reliability of measurements. Variations of drag-polar by adding model components such as tails, landing gear and test boom are shown, and longitudinal and lateral aerodynamic characteristics after changing control surfaces such as aileron, flap, elevator and rudder are also presented. To explore aerodynamic characteristics of an UAV with model components build-up and control surface deflections, lift curve slope, pitching moment variation with lift coefficients and drag-polar are examined. The discussed results might be useful to understand the general aerodynamic characteristics and drag pattern for the given UAV configuration.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.22 no.1
• /
• pp.51-55
• /
• 2000

Purpose : The purpose of this study is to setup a standard treatment protocol in surgical correction of skeletal malocclusion with Angle Class III patients. We asessed the soft tissue changes according to skeletal changes of patients who have undergone orthognathic surgery with bilateral split sagittal ramus osteotomy (BSSRO) and advancing genioplasty. Materials & Methods : The soft tissue change of 9 skeletal Class III patients was assessed after BSSRO and advancing genioplasty. The patient group was skeletal Class III who was surgically treated by BSSRO & advancing genioplasty. The average follow up period is 13 months with the range of 6 and 30 months. All patients have undergone preoperative and postoperative orthodontic treatment. The assessment was devided into two groups. One was antero-posterior relationship and the other was vertical relationship of dimensional changes of soft tissue after orthognathic surgery. Results : In antero-posterior dimensional changes after surgery, the percentage of soft tissue change in comparison to hard tissue was 89%. Vertical ratio after surgery, 86% soft tissue changes were assessed.

• Journal of Sericultural and Entomological Science
• /
• v.37 no.1
• /
• pp.10-15
• /
• 1995

Genetic characterization of Sri Lankan silkworm bivoltine population has not been at-tempted so far, since its sporadic introduction of bivoltine strains into the island, starting from the 1950's. Genetic structure of Sri Lankan population of mulberry silkworm Bombyx mori was investigated through estimation of general (GCA) and specific combining ability(SCA) and heritability(${h^2}_B$), on the economic quantitative characters from leading 8 inbreds and their 28 F1's in a half diallel cross, in an attempt to utilize the estimates in determination of future breeding methods and to predict the breeding value over the phenotypic value. It was found that the breeding population of the bivoltine silkworm in Sri Lanka has still maintained considerable amounts of additive gene action as well as nonadditive. For some time in the future, both breeding strategies of "selection without inbreeding" and also "inbreeding followed by crossing" should therefore be effective in genetic improvement of economic characters investigated. In addition, superior combiners in general and in specific F1′s were identified for each of 6 economic characters, to be immediately utilized in selection and also in cross breeding programs in Sri Lanka.

• Journal of IKEEE
• /
• v.10 no.1 s.18
• /
• pp.62-68
• /
• 2006

In this paper, we propose an adaptation strategy for blind equalizers, which combines a blind algorithm based on high order statistics and the decision directed LMS algorithm. In contrast to 'Stop-and-Go' algorithm, where adaptation is stopped for unreliable signals, the proposed algorithm applies high order statistics (HOS) blind algorithm to the unreliable signals and applies DD-LMS for the reliable signals. The proposed algorithm, named 'Run-and-Go' algorithm, inherits minimum MSE performance of DD-LMS and acquisition ability of blind algorithms. Furthermore, by updating the reliable signal region according to signal quality in each iteration, the convergence speed and acquisition ability is further improved.

• Phonetics and Speech Sciences
• /
• v.8 no.3
• /
• pp.91-109
• /
• 2016

This study was mainly aimed to investigate on the perceptions of occupational suitability for speakers who stutter and the associated factors. 90 college students who do not stutter participated in this study and asked to hear one of three audio recordings(i.e., fluent version, mildly-stuttered version, and severely-stuttered version) of a male speaker who stuttered. Then, the participants were asked to rate the speaker's communicative functioning, personal attributes, and suitability for 31 occupations, along with perceptions of the occupations' speaking demands and educational requirements. Results show that speakers who stuttered (i.e., mildly-stuttered and severely-stuttered version) received lower suitability ratings for high speaking demand occupations than for low speaking demand occupations. In addition, it has been shown that perceived speaking demand strongly affected occupational suitability ratings at both levels of stuttering severity. However, it has been shown that occupational suitability ratings were not associated with ratings of the speaker's personal attributes and perceived educational requirements. From these findings it can be argued that adults who stutter may face occupational stereotyping and/or role entrapment in work settings.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.1
• /
• pp.96-99
• /
• 2016

Generally, bistatic clutter, contrary to the monostatic clutter, has nonlinear structure in Angle-Doppler domain due to the noncooperative motion of the transmitter and the receiver. In this paper, we first simulate the bistatic clutter structure resulting from the relative motion of the transmitter and the receiver and then analyze their relations through the bistatic clutter structure in Angle-Doppler domain. Also, we show the operation condition of the transmitter and the receiver leading to low rank of a covariance matrix of the bistatic clutter.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.4 no.1
• /
• pp.111-120
• /
• 2000

This study discusses the issues related to the accuracy of deflection measurement in the testing of FRC. Some deflection methods may include large extraneous deformations. such as local crushing at the loading points, elastic and inelastic deformations of the loading fixture, etc. A faulty load-deflection curve will be obtained if an unstable deflection measuring system is used, and incorrect toughness evaluation can be reached on the basis of this faulty curve. In this paper, the discussion will focus on the effects of the deflection measuring system on both the measurement of the load-deflection response of FRC and the evaluation of FRC toughness. It is observed that ASTM toughness indices which is based on measuring deflection at first cracking is influenced significantly by extraneous deformation in deflection measurement. But extraneous deformation in deflection measurement result in negligible errors in toughness evaluation using JSCE and JCI definition. However, in order to evaluate toughness accuracy, it is desirable to use net load-deflection curve eliminated extraneous deformation.