• 한국유체기계학회 논문집
• /
• 제15권6호
• /
• pp.77-84
• /
• 2012

The aerodynamic performance of a single-stage transonic axial compressor was experimentally evaluated by measuring pressure and temperature distribution at the inlet and outlet of the compressor. The compressor was developed by Korea Aerospace Research Institute through multidisciplinary design optimization (MDO) method, especially integrating aerodynamic performance and structural stability. The test results show that the pressure ratio is 1.65 and the efficiency is 85.8 % at design point, where the corrected speed is 22,000 rpm and the corrected mass flow rate is 15.4 kg/s, and it has a good agreement with the design target and computational results. The distribution of pressure ratio is very steep at design speed, compared with the trend of other subsonic compressors. Also the static pressure distribution on the stator casing shows that the blade loading is gradually increasing through the stage as designed.

• 한국산업융합학회 논문집
• /
• 제25권3호
• /
• pp.333-340
• /
• 2022

Recently, the use of large-capacity secondary batteries for electric vehicles is rapidly increasing, and accordingly, the demand for technologies and equipment for battery reliability evaluation is increasing significantly. The existing short circuit test equipment for evaluating the stability of the existing secondary battery consists of relays, MCs, and switches, so when a large current is energized during a short circuit, contact fusion failures occur frequently, resulting in high equipment maintenance and repair costs. There was a disadvantage that repeated testing was impossible. In this paper, we developed an electronic short circuit test device that realizes stable switching operation when a large-capacity power semiconductor switch is energized with a large current, and applied smart ICT technology to this electronic short circuit stability test system to achieve high speed and high precision through communication with the master. It is expected that the inspection history management system based on data measurement, database format and user interface will be utilized as essential inspection process equipment.

• 한국구조물진단유지관리공학회 논문집
• /
• 제27권6호
• /
• pp.39-46
• /
• 2023

이 연구에서는 차세대 고속철의 증가하는 주행속도에 따라 600 km/h 까지 10 km/h 간격으로 고속철 PSC 박스 연속교량의 교량받 침에 대한 동적거동을 수치해석하였다. 경부 고속철 구간의 40미터 단경간과 2경간 연속 PSC 박스교를 연구대상으로 프레임모형을 구성하였 으며, 38자유도의 관성질량 차량모형 및 교량과 궤도의 불규칙성을 포함한 상호작용력을 고려하였다. 주행속도별 교량받침의 종방향 변위와 누적이동거리와 변위속도를 산정하여 교량의 동적거동 추이분석과 비교하였다. 또한 마찰판의 내구성능평가를 위한 장기마찰시험 기준을 적 용하였다.

• 음성과학
• /
• 제1권
• /
• pp.27-38
• /
• 1997

The differences in French Intonation between French and Korean learners can be applied to French intonation education. One native French speaker and three native Korean speakers who learned French language at High school were selected for this study. The subjects spoke test phrases based on the different syntactic structures. High-Speed speech Analysis system(RILP) was used for this experiment. The different intonation curves were showed at the end of phrase and at the beginning of phrase between French and Korean learners. At the end of phrases, French intonation appeared to have increasing and decending pitch contours in the case of wh-question, exclamation and finality. However, Korean learner's intonation showed only increasing pitch contours. At the beginning of phrase, French intonation shows decending pitch contours in the case of minor continuation and command. In contrast, Korean learner's intonation appeared to have increasing pitch contours. The new intonation training system using PC can have great effect on education of French as a second language.

• 수산해양기술연구
• /
• 제31권4호
• /
• pp.340-349
• /
• 1995

본 연구는 현재 국내에서 일부 사용되는 쌍끌이 중층망어구어법에서 문제점으로 지적되고 있는 망고를 보다 크게 하는 것, 망목에 뜸이 걸리는 것, 네트드럼에 감기는 어구 부피를 줄이는 것 등의 해결방법으로 카이트(kite)의 적용을 검토한 것이다. 중층망의 모형에 카이트를 부착하여 회류수조에서 모형실험을 통하여 유속에 따른 어구의 저항 및 전개성능을 비교 조사하였다. 그 결과를 요약하면 다음과 같다. 1. 유체저항은 지수함수곡선의 모양을 보여 유속이 낮을 때는 저항의 증가폭이 작지만 유속이 클 때는 저항의 증가폭이 커지며, 카이트망의 저항이 중층망의 0.68~0.72배로 작다. 2. 망고는 지수함수곡선의 모양으로 감소하는 양상을 보이며, 유속 1.3m/sec 이하에서는 카이트망의 망고가 중층망보다 작지만 1.5m/sec 이상에서는 크며, 유속이 커질수록 그 차이도 커진다. 망폭은 유속 2.0m/sec 이하에서는 유속이 커짐에 따라서 다소 커지나 그 이상에서는 거의 같으며, 카이트망과 중층망은 거의 같다. 3. 망구모양은 모두 유속이 커짐에 따라서 납작해지는 타원형모양을 이루며, 망구면적은 유속이 커짐에 따라서 지수함수곡선의 형태로 작아진다. 여과량은 로그함수의 곡선 형태를 보이고 있는데, 유속 1.3m/sec 이하에서는 카이트망의 여과량이 중층망보다 적지만, 1.5m/sec에서는 카이트망의 여과량이 중층망보다 약 3%, 2.0m/sec에서는 약 11%, 2.5m/sec에서는 약 16% 더 많다

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 춘계학술대회 논문집 디스플레이 광소자 분야
• /
• pp.96-99
• /
• 2005

As the demand of internet networks using backbone communication systems recently increased, the researches on the high-speed wideband optical communication systems are required. For high-speed optical communication systems, asymmetric sampled grating distributed feedback laser diodes (DFB-LDs) are developed and the reliability of DFB-LDs is examined. The reliability of DFB-LDs is performed by monitoring I-V and L-I characteristics and two degradation phenomena related to the electrical characteristics of LDs are observed during the life tests. The first degradation phenomenon by increasing the reverse current is considered as a formation of leakage current path enough to prevent lasing operation in lateral blocking layer near active region of lasers. The second degradation phenomenon by decreasing the forward current is considered as activation of non-radiative Auger recombination process by thermal energy and the second degradation phenomenon is recovered after the off-test period at room temperature Eventually, evaluating the reliability of DFB LDs can allow us to improved the manufacturability in high-volume manufacturing.

• Journal of Biosystems Engineering
• /
• 제13권2호
• /
• pp.38-45
• /
• 1988

This study was intended to develop the system automatically controlling travel direction of combine by means of sensing paddy rows. The control system was composed of three detecting levers having different length, micro-switch, microcomputer and electro-hydraulic control system. Sensor and control system developed was tested to estimate optimum design values and its actual performance as installed in combine. The computer simulation and performance test at simulated and actual field were conducted to test for possibility of practical use. The results of the study arc summarized. as follows: 1. The travel traces of combine hiving the conventional sensor with 2 levers and the new sensor detecting the slope of paddy rows were compared through computer simulation. Turning frequency of combine having new sensor was fewer than that of conventional sensor, but the rate of turning for the combine with new sensor was much greater than that of conventional sensor. 2. As sensor was established behind the tip of divider, the sensor itself well followed paddy rows but the tip of divider did not, resulting in divider being deviated from paddy rows. It was analyzed that the sensor should be attached closer to the tip of divider to have a better performance of the control system. 3. The greater the length of sensor lever for given location of sensor attachment and combine forward speed, the higher sensitivity of turning in control system. Moreover, increasing combine speed resulted in a worse performance of control system following paddy rows. Consequently, it was necessary that an optimum length of sensor attachment and for the range of combine operational speed. 4. Field test of combine installed with the sensor and electro-hydraulic system developed in this study showed that it may be operated smoothly and well behaved to paddy rows to 4th gear of combine speed which was 59cm/s. Consequently. it was concluded that the combine with the guidance control system developed in this study may be successfully used for paddy combining.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2575-2577
• /
• 2000

We experimented on AGV driving test with color CCD camera which is setup on it. This paper can be divided into two parts. One is image processing part to measure the condition of the guideline and AGV. The other is part that obtains the reference steering angle through using the image processing parts. First, 2 dimension image information derived from vision sensor is interpreted to the 3 dimension information by the angle and position of the CCD camera. Through these processes, AGV knows the driving conditions of AGV. After then using of those information, AGV calculates the reference steering angle changed by the speed of AGV. In the case of low speed, it focuses on the left/right error values of the guide line. As increasing of the speed of AGV, it focuses on the slop of guide line. Lastly, we are to model the above descriptions as the type of PID controller and regulate the coefficient value of it the speed of AGV.

• Tribology and Lubricants
• /
• 제32권6호
• /
• pp.195-200
• /
• 2016

This study examines the wear behavior of mild steel pins mated against alloyed tool steel discs in a pin-on-disc type sliding test machine and provides specific clarification regarding the effects of disc hardness on the wear behavior of a mating mild steel pin. The analysis confirms these effects through the observation of differences in the wear rates of the mild steel pins at low sliding speed ranges. These differences occur even though the hardness of the mating disc does not affect the wear characteristic curve patterns for the sliding speeds, regardless of the wear regime. In the running-in wear regime, increasing the hardness of the mating disc results in a decrease in the wear rates of the mild steel pins at low sliding speed ranges. However, in the steady-state wear region, the wear rate of a pin mated against the 42DISC is greater than the wear rate of a pin mated against the 30DISC, which has a lower hardness value. This means that the tribochemical reactivity of the mating disc, which is based on hardness value, influences the wear behavior of mild steel at low sliding speed ranges. In particular, oxides with higher oxygen contents, such as $Fe_2O_3$ oxides, form predominantly on the worn surface of the 42DISC. On the contrary, the wear behavior of mild steel pins at high sliding speed ranges is nearly unaffected by the hardness of the mating disc.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 추계학술대회 논문집
• /
• pp.86-90
• /
• 2001

Demand of good seakeeping perfomace is increasing for sea going vessels such as cruisers, naval ships and container ships. Especillay roll motion is one of major concerns in evaluation of seakeeping performance due to its large resonace motion. Since large roll resonance motion is mainly arised from inherent small damping. use of additional mechnism to provide roll damping can significantly reduce roll motion. In this paper, a reliable performace evaluation method of fin stabilizer, which is very useful for stabilizing roll motion of mid and high speed vessls, is described. Model test and time domain simulation methods are adopted for performance evaluation in which real operating situation of fin stabilizer can be exactly modelled. Model test and simulation results show good correlations between model test and simulation results.