• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.2
• /
• pp.193-200
• /
• 2012

The selection factors of the protective clothing against the NBC agents are the protection(chemical, biological, TIMs), duration, weight/comfort, dexterity/mobility, size, visibility, cleaning and unit cost, etc. To develop the NBC protective clothing, we should need to review about the design concepts of the protective materials(shell and liner fabric) and form. This paper identify an important factors for the protective materials and form, and presents design strategies for important factors based on the evaluation results of the materials and the form.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.2 no.2
• /
• pp.140-147
• /
• 1999

A gene expressing organophosphorus acid (OPA) anhydrolases have been cloned from Alteromonas haloplanktis strain and expressed in bacterial strain BL21. Crude extract was prepared from the transformed bacterial strain BL2l and used in testing its degrading capability of real nerve gas, soman and sarin. Within 1 minute after the start of the reaction, nearly 65% of the soman added to the reactant(3mM) was degraded by adding 1 mg of the crude extract enzyme(20.0 Unit $mg^-{1}$ crude protein). In 6 minutes, the reaction reached at its steady state, which indicates that soman was completely degraded by that time. In the case of sarin, the degradation efficiency was observed to be about 0.7 times of that of soman. If the specific activity of OPAA is enhanced by both increased expression efficiency and purification, OPAA seems to be applied for the development of decontaminant of skin, especially of eye.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.1
• /
• pp.142-148
• /
• 2014

The mirror which is considered in designing a MFD is off-axis primary one and its dimension is wide 556mm height 345mm. The MFD(Mirror Fixation Device) load specification is generated for the high resolution mirror. The optical WFEs for unit loads are calculated from mirror sensitivity analysis and they are compared with allocated allowable optical WFE. The parasite load for the MFD is calculated from their comparison. The MFD compliant with the parasite load is designed.

• Journal of the military operations research society of Korea
• /
• v.18 no.1
• /
• pp.110-127
• /
• 1992

In the preventive replacement policies of system that the failure can be detected through only periodic inspection, there is a penalty cost associated with the lapsed time between system failure and its detection. The system under study is replaced if the system fails before $n^{th}$ inspection, otherwise, preventive replacement is performed at the $n^{th}$ inspection. The decision variables are the inspection interval and the period of preventive replacement. This study presents the optimal preventive replacement policy that minimizes the long-run expected cost per unit time.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.758-764
• /
• 2019

The chassis of the Korean light tactical vehicle adopts a frame-on-body structure that uses lightweight design technology in terms of equipment operating characteristics. Military vehicles are operated in much harsher conditions compared to civilian vehicles, including mountainous terrain, especially steep slopes. Due to this characteristic, frame-welded cracks were found on some military vehicles. Therefore, in this paper, road damage analysis was conducted by identifying various roads including the military unit's road. The result confirmed that the operating environment of some military units' tactical road was much harsher than the endurance road test condition. A solution was derived through defect analysis, design review, and actual vehicle driving test. This study can be used as a reference by suggesting the development direction for the durability test of a new vehicle.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.45 no.3
• /
• pp.31-39
• /
• 2022

The Army, Navy, and Air Force are currently making various efforts to apply defense IoT technology by reflecting the characteristics of each military. However, there are concerns that comprehensive collection, management, and analysis may be limited because each military has no overlapping system or guaranteed interoperability of data, and there are inefficient aspects in terms of using and investing a limited defense budget. In this study, evaluation items and priorities for pilot projects were selected by applying Delphi technique and AHP method to determine which projects are preferentially effective when commonly applied in terms of Army, Navy, and Air force. As a result of the analysis, the project basis and driving force, project feasibility, performance and ripple effect, redundancy and connection were identified in the order of IoT-based small detachment units and unmanned base construction, intelligent smart unit, smart ground ammunition depot, and smart training management system. According to the comprehensive results reflecting the weights of each evaluation item, the fact that small detachment units and unmanned base construction project are recognized as the first project to be applied to the Army, Navy, and Air Force is a valid approach to be effective while each military is burdened with personnel management because of the reduction of manpower. Through the research results, it is expected that the direction of application to the policy of the defense IoT project can be confirmed in terms of efficient use of limited budgets.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.240-247
• /
• 2020

The Korean military is having difficulty maintaining combat power due to the insufficient troop numbers caused by a demographic cliff and the reduction of the mandatory military service period. Recently, discussions on improving the military training system have increased significantly. This paper proposes an optimization model to establish military training schedules to improve combat power. The oblivion and learning effects on training tasks were quantified through a survey and applied to the model. The objective value, combat power, was calculated based on the total task scores of the unit members and the number of task failures after four weeks. The scenarios were configured by the change in educational conditions and initial scores of some tasks. As a result of scenario experiments, combat power has increased by at least 10% and up to 77%, which is sufficient to maintain combat power considering the change in troops. In addition, the planning of combat skill tasks has a significant impact on combat power. Through this research model, it is expected that military training managers will be able to establish a training schedule that maintains or improves the combat power of troops effectively.

• Journal of Convergence for Information Technology
• /
• v.10 no.11
• /
• pp.224-231
• /
• 2020

This study was conducted to develop a group counseling program to solve the problem of maladjustment of military personnel and to verify the effectiveness of the program. The 12 session CBT and ACT program for military soldiers experiencing emotional and behavioral problems was developed and the effectiveness was verified by conducting a program once a week for soldiers in the army units based in South Chungcheong Province. Adult Self Report scale(ASR) was implemented for pre-post test and analysis, and descriptive statistical analysis, cross-analysis, paired sample t-test, and independent sample t-test were performed to analyze the results. The results indicated are as follows: First, the preliminary homogeneity test between groups showed that the two groups had homogeneous demographic characteristics and the characteristics of the variables. Second, as a result of the pre-post test verification, both CBT and ACT groups showed significant changes in problem behavior totals, internalizations, and externalizations. Third, there was no difference between the pre-post-examination of the CBT group and the ACT group. This study is meaningful in that it was involved in the maladjustment problem within the military unit, and compared the effectiveness between the two theories, and proposed the study of control groups and further studies on more diverse and diverse subjects that were not implemented under the circumstances of the unit.

• Journal of Korean Society on Water Environment
• /
• v.25 no.4
• /
• pp.522-529
• /
• 2009

To supply safe drinking water to areas lacking in water supply and drainage system, such as rural area and military bases in proximity to Demilitarized Zone, effective method for treating organic contaminants such as MTBE is required. This study focuses on seeking optimal conditions for effective degradation of MTBE using a bath type ultrasound reactor. Effectiveness of MTBE degradation by ultrasound is dependent on the frequency, power, temperature, treatment volume, initial concentration, catalyst, etc. In this study the degradation rate of MTBE by ultrasound was proportional to power/unit volume ratio and removal is relatively more efficient for 0.1 mM than for 1 mM of MTBE solution. Efficiency of ultrasound treatment for 1 mM MTBE solution was enhanced under bath temperature of $30^{\circ}C$ compared to $4^{\circ}C$, but the temperature effect was negligible for 0.1 mM MTBE solution. Also for 0.1 mM MTBE solution, effect of catalyst such as $TiO_2$ and $Fe^0$ on treatment speed was negligible, and zeolite even increases the time taken for the degradation. Under these specific experimental conditions of this study, the most determinant factor for degradation rate of MTBE in solution was frequency and power of ultrasound. The results have shown that a continuous ultrasound reactor system can be used for small scale remediation of organically polluted groundwater, under optimal conditions.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.7
• /
• pp.88-96
• /
• 1997

As the need of automatized system has been increased recently together with the development of industrial and military technologies, the adaptive real-time target detection technologies that can be embedded on vehicles, planes, ships, robots and so on, are hgihly demanded. Accordingly, this paper proposes a novel approach to detect and segment the moving targets using the binary phase extraction joint transform correlator (BPEJTC), the advanced image subtraction filter and convex hull processing. The BPEJTC which was used as a target detection unit mainly for target tracking compensating the camera movement. The target region has been detected by processing the successful three frames using the advanced image subtraction filter, and has become more accurate by applying the developed convex hull filter. As shown by some experimental results, it is expected that the proposed approaches for compensation of the camera movement and segmentationof of target region, can be used for th emissile guiddance, aero surveillance, automatic inspectin system as well as the target detection unit of automatic target recognition system that request adaptive real-time processing.