• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.528-530
• /
• 1999

This paper addresses the analysis and design of fuzzy control systems for a class of complex single input single output nonlinear systems. Firstly, the nonlinear system is represented by well-known Takagai-Sugeno (TS) fuzzy model and the global controller is constructed by compensating each linear model in the rule of TS fuzzy model. The design of conventional TS fuzzy-model-based controller usually is composed of two processes. One is to determine static state feedback gain of each local model and the other is to validate the stability of the designed fuzzy controller. In this paper, we propose an alternative of the design of TS fuzzy-model-based controller. The design scheme is based on the extension of conventional optimal control theory to the design of TS fuzzy-model-based controller. By using the proposed method the design and stability analysis of the TS fuzzy model-based controller is reduced to the problem of finding the solution of a set of algebraic Riccati equations. And we use the recently developed interior point method to find the solution of AREs, where AREs are recast as the LMI formulation. One simulation example is given to show the effectiveness and feasibility of the proposed fuzzy controller design method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.11
• /
• pp.1380-1386
• /
• 2016

In this paper, we propose and evaluate OFDM(Orthogonal Frequency Division Multiplexing)-SSB(Singe Side Band) for improving spectral efficiency. The proposed system is based on OFDM system using DCT(Discrete Cosine Transform) and DHT(Discrete Hilbert Transform) for SSB modulation, this proposed system transmit a BPSK modulation signal through a single sideband and BPSK modulation signal through the other single sideband. In other words, we design and evaluate the proposed system which transmit two BPSK signal through each other single sideband. Also each BPSK BER performance is similar with theoretical BPSK BER performance. the proposed system transmits BPSK signal using half of spectrum of conventional OFDM system or transmit two BPSK signal in same time.

• Journal of Astronomy and Space Sciences
• /
• v.11 no.1
• /
• pp.41-52
• /
• 1994

Currently, the CCDs are widely used in astronomical observations either in direct imaging use or spectroscopic mode. However according to the recent technical advances, new large format CCDs are rapidly developed which have better performances with higher quantum efficiency and sensitivity. In many cases, some microprocessors have been adopted to deal with necessary digital logic for a CCD imaging system. This could often lack the flexibility of a system for a user for to upgrade with new devices, especially if it is a commercial product. A new design concept has been explored which could provide the opportunity to deal with any format of devices from any manufactures effectively for as tronomical purposes. Recently available PLD (Programmable Logic Devices)technology makes it possible to develop such digital circuit design, which can be integrated into a single component, instead of using micrprocessors. The design concept could dramatically increase the efficiency and flexibility of a CCD imaging system, particularly when new or large format devices are available and to upgrade the performance of a system. Some variable system control parameters can be selected by a user with a wider range of choice. The software can support such functional requirements very conveniently. This approach can be applied not only to astronomical purpose, but also to some related fields, such as remote sensing and industrial applications.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.1
• /
• pp.489-494
• /
• 2020

We propose to designs and to implements a robot analyzing the risk of occurrence of mental disorder of single-person households' workers through the facial expression-detecting system. Due to complex social factors, the number and proportion of single-person households continues to increase. In addition, contrast to the household of many family members, the prevalence of mental disorder among single-person household varies greatly. Since most patients with mental can not detect the disease on their own, counseling and treatment with doctors are often ignored. In this study, we design and implement a robot analyzing the risk of mental disorder of single-person households workers by constructing a system with Q.bo One, a social robot created by Thecorpora. Q.bo One is consisted of Arduino, ar raspberry pie, and other sensors designed to detect and respond to sensors in the direction users want to implement. Based on the DSM-5 provided by the American Psychiatric Association, the risk of mental disorder occurrence was specified based on mental disorder. Q.bo One analyzed the facial expressions of the subjects for a week or two to evaluate depressive disorder, anxiety disorder. If the mental disorder occurrence risk is high, Q.bo One is designd to inform the subject to counsel and have medical treatment with a specialist.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.6
• /
• pp.87-93
• /
• 2017

In this paper, we design a small low power single channel ECG(Electrocardiogram) system of Chest Belt type with fiber-type electrodes to measure emotional state change of game addict. HRV(Heart Rate Variability) is analyzed through heart rate signal measurement and the psychological stress state is judged by using it. And it verifies its effectiveness through prototype. First, we design HR measurement module through low power MCU(Micro Controller Unit) and implement prototype level measurement system. The results showed that the difference between the addiction group and the general group was confirmed and that the system was effective. The result of this study can be used for health management such as reduction of stress of the user through music and breathing that lowers the stress by detecting the stress state of the general person or the chronic ill person.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.34 no.4
• /
• pp.138-144
• /
• 2011

The design flexibility and robustness have become key factors to handle various sources of uncertainties at the early phase of design. Even though designers are uncertain about which single values to specify, they usually have a preference for certain values over others. In the first and second reports of a four-part paper, a set-based design approach has been proposed for achieving design flexibility and robustness while capturing designer's preference, and its effectiveness has been illustrated with a simple vehicle side-door impact beam design problem. This report presents the applicability of the proposed design approach to the large-scale multi-objective design optimization with a successful implementation of real vehicle side-door structure design.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.5
• /
• pp.1908-1916
• /
• 2018

This paper proposes a controller design method for suppressing the resonance generated in the slave motor in the middle and low speed operation range, according to the load and parameter differences between two motors, during parallel operation using the master and slave method that controls two surface permanent magnet synchronous motors connected in parallel by a single inverter. The proposed resonance suppression controller is directly obtained by analyzing the resonance characteristics, using the lead controller method. Therefore, it is possible to fundamentally reduce trial and error to set the controller gain. In addition, because the proposed resonance suppression controller was designed as a lead controller, the stability region of the system increased owing to the added zero point, making the system robust with respect to parametric variations. Simulations and experiments confirmed the usefulness of the proposed method and the system's robustness with respect to parametric variations.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.498-506
• /
• 2018

Recently, the US commanded a wargame simulation system of a combined ROK-US exercise with single federation. However, after the OPCON transfer, many limitations to the single federation have been cited such as security policies and information protection. We suggest a hierarchical federation as a way to overcome these problems. Regarding HLA rules, the participants use the same FOM and RTI in single federation. There are limitations to implement CI in applying heterogeneous FOMs and RTIs in current single federation. Therefore, we propose implementing CI with heterogeneous FOMs and RTIs in a hierarchical federation. This system overcomes the weaknesses of the system structure, which is a disadvantage of the single federation. In the federation test, we can apply heterogeneous FOMs and RTIs and achieve similar performance to the current combined exercise simulation. In conclusion, ROK should lead the simulation system of combined exercises using the CI after the OPCON transfer.

• Proceedings of the KIPE Conference
• /
• 2013.11a
• /
• pp.23-24
• /
• 2013

In recent years, ISG (Integrated Starter and Generator) system receives a great attention for electric electrification of normal gasoline vehicle. As a cost-effect machine design, an ISG without a permanent magnet is considered. A 12slot-10pole field-excitation flux-switching synchronous machine (FEFSSM) is designed and analyzed via JMAG. The active parts such as the field excitation coil and armature coil are located on the stator. The rotor part consisting of single piece iron makes it more robust and suitable to apply for high speed motor drive system application coupled with reduction belt. The design target is the motor with a maximum torque of 40Nm, a maximum power of 10kW and a maximum speed of 14000 rpm. In this paper, design optimization method is proposed for high torque capability.

• Journal of IKEEE
• /
• v.13 no.2
• /
• pp.101-107
• /
• 2009

Growth in the VLSI process and design technology is resulting into a continuous increase in the number of IPs on a chip to form a system. Because of many IPs on a single chip, efficient communication between IPs is essential. We propose a dynamically reconfigurable 3-layer bus structure which can adapt to the pattern of data transmission to achieve an efficient data communication between various IPs. The proposed 3-layer bus can be reconfigured to multi-single bus mode, and single-multi bus mode, thus providing the benefits of both single-bus and multi-bus modes. Experimental results show that the flexibility of the proposed bus structure can reduce data transmission time compared to the conventional fixed bus structure. We incorporated the proposed bus structure in a JPEG system and verified that the proposed structure achieved an average of 22% improvement in time over the conventional fixed bus structure.