• Journal of Soil and Groundwater Environment
• /
• v.18 no.7
• /
• pp.12-17
• /
• 2013

Heavy metal contamination of soil and water from industrial sources remains a worldwide environmental concern. Concentrations of toxic metals were measured in soil from banks of the Han and Anyang rivers. Pre-monsoon samples contained the highest heavy metal concentrations (Cu > As > Pb > Cd > $Cr^{6+}$; up to 57.80, 38.23, 25.43, 2.21, 0.32 mg/kg, respectively), but concentrations decreased at all sites during the monsoon and post-monsoon seasons. Higher heavy metal concentrations in pre-monsoon samples may be attributed to dust pollution, especially from roads near the river. A gradual reduction in heavy metal concentrations during the rainy season may be due to washing out. The high concentration of metals could cause health problems, especially in residential areas.

• The Korean Journal of Food And Nutrition
• /
• v.11 no.6
• /
• pp.595-599
• /
• 1998

A batch experiment was conducted to evaluate the removal capacity of welsh onion(Allium fistulosum L.), shallot (Allium ascalonicum L.), garlic (Allium sativum L.) roots as an adsorbent for Ni and Pb in aqueous solution. One gram of the dried Allium root powder was reacted in 100ml of solution containing 10mg of each heavy metal and effects of metal concentration, pH, temperature, and size of adsorbent on the removal efficiency were evaluated. The results were as follows ; The amount of adsorption of heavy metal ions were higher with the smaller particles size of adsorbent. Garlic root was high adsorption capacity of Pb, especially. The higher concentration of heavy metal solution was, the more amount of adsorption of heavy metals was. The adsorption ratio was differed from a kind of heavy metal. As the temperature increased, the amount of adsorption of Ni and Pb by shallot and welsh onion were decreased. The amount of adsorption of Ni was high under alkali conditions but the amount of adsorption of Pb was high under neutral and acidity condition.

• Journal of Environmental Health Sciences
• /
• v.22 no.3
• /
• pp.81-87
• /
• 1996

The purpose of this research is to examine the utilization of oyster shells for neutralization and removal of heavy metal ions in plating wastewater, because oyster shells have been known to be very porous, to have high specific surface area and to have alkaline minerals such as calcium and magnesium. The results obtianed from this research showed that oyster shells had a buffer capacity to neutralize an acidic.alkali system in plating wastewater. Generally, it could be showed that the removal efficiencies of heavy metal ions were very influenced by reaction times and oyster shell dosages. In point of ocean waste, if oyster shells substituted for a valuable adsorbent such as actviated carbon, they could look forward to an expected economical effect.

• Journal of Environmental Science International
• /
• v.11 no.12
• /
• pp.1299-1305
• /
• 2002

Thirty sediment samples of the <63${\mu}{\textrm}{m}$ fraction collected from the southwestern coast of Korea were analysed for their heavy metal (Fe, Mn, Cr, Co, Cu, Ni, Zn and Pb) concentration. The results show that sediment texture plays a controlling role on the total metal concentrations and their spatial distribution. A single lM HCl extraction procedure was used in order to assess the environmental risk of heavy metals in bottom sediments. The non-residual fraction was the most abundant pool for Mn and Pb in most samples, which means that this metals are highly avaliable in these sediments. Cr, Ni, Fe, Co, Zn and Cu were mainly associated with the residual fraction, suggesting that their concentrations are controlled significantly by transport processes with the fine particles as carriers from diffuse pollution source. Concentration enrichment ratios(CER) were calculated from the non-residual contents and their values allowed us to classify the sediments according to their environmental risk.

• Microbiology and Biotechnology Letters
• /
• v.48 no.4
• /
• pp.399-422
• /
• 2020

Remediating soils contaminated with heavy metals due to urbanization and industrialization is very important not only for human health but also for ecosystem sustainability. Of the available remediation technologies for heavy metal-contaminated soils, phytoremediation is a relatively low-cost environment-friendly technology which preserves biodiversity and soil fertility. The application of plant growth-promoting bacteria (PGPB) during the phytoremediation of heavy metal-contaminated soils can enhance plant growth against heavy metal toxicity and increase heavy metal removal efficiency. In this study, the sources of heavy metals that have adverse effects on microorganisms, plants, and humans, and the plant growth-promoting traits of PGPB are addressed and the research trends of PGPB-assisted phytoremediation over the last 10 years are summarized. In addition, the effects of environmental factors and PGPB inoculation methods on the performance of PGPB-assisted phytoremediation are discussed. For the innovation of PGPB-assisted phytoremediation, it is necessary to understand the behavior of PGPB and the interactions among plant, PGPB, and indigenous microorganisms in the field.

• Journal of Environmental Health Sciences
• /
• v.18 no.1
• /
• pp.47-57
• /
• 1992

This study was performed to evaluate contamination degree of heavy metals in sediments of Han River, compared with other nation's evaluation method. The results were as follows 1. The contamination Ratio calculation method by heavy metal concentration in differnt fraction size has a limitation to apply to all of the areas of Han river because of its characteristics of sediment. As a result, this method applied to only 4 areas of Pal Dang, Wang Sook Chon, Uk Chon, and Bul Kwang Chon, and Contmination Ratio of heavy metals in those areas were relatively low of below 3. So it's considered that those areas have less contaminated from anthropogenic contaminants. 2. The Contamination Ratio calculation method by heavy metal concentration in different areasthat of upper area to be background level-has a limitation also to apply to Han river. But it is considered that this method was relatively suitable to apply, so it should be prepared evaluation standand method for them. Contamination ratio from background level as Pal Dang area were most high in An Yang Chon. So it must be prepared purification and control measure at An Yang Chon.

• Journal of Environmental Health Sciences
• /
• v.41 no.1
• /
• pp.30-39
• /
• 2015

Objectives: This study was conducted to determine the heavy metal contents in commercial herbal medicines in Korea. Methods: Monitoring of lead, arsenic, cadmium and mercury was carried out on 116 samples of eleven types of herbal medicines. Among the total samples, 71 samples were domestic and 45 were imported. The samples were digested using the microwave method. The heavy metal contents were measured by inductively coupled plasma atomic emission spectrometry (ICP-AES) and a mercury analyzer. ICP-AES was used to analyze lead, arsenic cadmium. Mercury was analyzed by the amalgamation method. Results: The mean values of the heavy metal contents in the herbal medicines were Pb 0.64mg/kg, As 0.26mg/kg, Cd 0.07mg/kg and Hg 0.004mg/kg. Of the total samples, one violated the MFDS (Ministry of Food and Drug Safety) regulatory guidance on heavy metals in herbal medicines. Lead was detected at more than 5mg/kg in one sample. The measured values of arsenic, cadmium and mercury in the herbal medicines showed levels lower than the recommended levels for herbal medicines in MFDS regulatory guidance. In the comparison of domestic samples with imported herbal medicines, it was found that one domestic sample surpassed the maximum residue limits for lead. Conclusion: These results will be used to establish the regulation and control of heavy metal contents in herbal medicines. In addition, continuous monitoring is needed to ensure confidence in and the safety of these herbal medicines.

• Journal of Environmental Health Sciences
• /
• v.44 no.5
• /
• pp.491-501
• /
• 2018

Objectives: The aims of this study were to compare concentrations and the correspondence of human blood cadmium by using graphite furnace atomic absorption spectrometry (GF-AAS) and inductively coupled plasma-mass spectrometry (ICP-MS), which are representative methods of heavy metal analysis. Methods: We randomly selected 79 people who agreed to participate in the research project. After confirming the linearity of the calibration curves for GF-AAS and ICP-MS, the concentrations of cadmium in a quality control standard material and blood samples were measured, and the correlation and the degree of agreement were compared. Results: The detection limit of ICP-MS (IDL: $0.000{\mu}g/L$, MDL: $0.06{\mu}g/L$) was lower than that of GF-AAS (IDL: $0.085{\mu}g/L$, MDL: $0.327{\mu}g/L$). The coefficient of variation of the quality control standard material showed stable values for both ICP-MS (clinchek-1: 5.35%, clinchek-2: 6.22%) and GF-AAS (clinchek-1: 7.92%, clinchek-2: 5.22%). Recovery was relatively high for both ICP-MS (clinchek-1: 95.1%, clinchek-2: 92.8%) and GF-AAS (clinchek-1: 91.4%, clinchek-2: 98.8%), with more than 90%. The geometric mean, median, and percentile of blood samples were all similar. The agreement of the two instruments compared with the bias of the analytical values found that about 81% of the analytical values were within ${\pm}30%$ of the deviation from the ideal reference line (y=0). As a result of the agreement limit, the value included in the confidence interval was about 94%, which shows high agreement. Conclusion: In this study, we confirmed there was no significant difference in concentrations of a quality control standard material and blood samples. Since ICP-MS showed lower concentrations than GF-AAS at concentrations below the method detection limit of GF-AAS, it is expected that more precise results will be obtained by analyzing blood cadmium with ICP-MS.

• Journal of Environmental Science International
• /
• v.17 no.1
• /
• pp.57-66
• /
• 2008

The frequency analysis and the probability plot were applied to heavy metal contents of soils collected from the Goseong Cu mine area as a statistic method for the determination of the threshold value which was able to partition a population comprising largely dispersed heavy metal contents into the background and the anomalous populations. Almost all the heavy metal contents of soil showed a positively skewed distributions and their cumulative percentage frequencies plotted as a curved lines on logarithmic probability plot which represent a mixture of two or more overlapping populations. Total Cu, Pb and Cd data and extractable Cu and Pb data could be partitioned into background and anomalous populations by using the inflection in each curve. The others showed a normally distributed population or an largely overlapped populations. The threshold values obtained from replotted frequency distributions with the partitioned populations were Cu 400 mg/kg, Pb 450 mg/kg and Cd 3.5 mg/kg in total contents and Cu 40 mg/kg and Pb 12 mg/kg in extractable contents, respectively. The thresholds for total contents are much higher than the tolerable level of soil pollution proposed by Kloke(Cu 100 mg/kg, Pb 100 mg/kg, Cd 3 mg/kg), but those for extractable contents are not exceeded the worrying level of soil pollution proposed by Ministry of Environment(Cu 50 mg/kg, Pb 100 mg/kg). When the threshold values were used as the criteria of soil pollution in the study area, $9{\sim}19%$ of investigated soil population was in polluted level. The spatial distributions of heavy metal contents greater than threshold values showed that polluted soils with heavy metals are restricted within the mountain soils in the vicinity of abandoned mines.

• Journal of the Korean Society of Fashion and Beauty
• /
• v.2 no.2 s.2
• /
• pp.93-100
• /
• 2004

This study is to measure the heavy metal content of permanent wave products which on marketing correctly as estimating the extent of exposure by a hair permanent wave scientifically. We would like to prevent an affair from arising health obstruction as to the heavy metal who is using those and also show the basic data for proposing the new standard. The results were as follows.: in case of the average heavy metal content for a wave type thioglycol acid ingredient includes 1.61ppm(Pb), 0.03ppm(Cd), 0.05ppm(Ni), 0.27ppm(Mn), 0.82ppm(Cu) and those were recognized the significant gap between products all the heavy metals. In case of a cysteine acid ingredient includes 0.86ppm(Pb), 0.01ppm(Cd), 0.05ppm(Ni), 0.20ppm(Mn) and 0.66ppm(Cu) and those were recognized the significant gap between products except a nickel. Straight type of permanent wave reductant includes 2.11ppm(Pb), 0.01ppm(Cd), 0.27ppm(Ni), 0.66ppm(Mn), 2.53ppm(Cu) and those were recognized the significant gap between products all the heavy metals. Permanent wave reducing agent includes 1.43ppm(Pb), 0.01ppm(Cd), 0.09ppm(Ni), 0.66ppm(Mn), 0.75ppm(Cu) and those were approved the significant gap between products except a cadmium. Exposure level of the heavy metal contents per onetime permanent waving were 242.3ppm(Pb), 2.5ppm(Cd), 17.7ppm(Ni), 89.0ppm(Mn), 174.7ppm(Cu).