• Korean Journal of Optics and Photonics
• /
• v.27 no.5
• /
• pp.165-173
• /
• 2016

In this paper, we propose a three-dimensional (3D) scanning system based on two line lasers. This system uses two line lasers with different wavelengths as light sources. 532-nm and 630-nm line lasers can compensate for missing scan data generated by geometrical occlusion. It also can classify two laser planes by using the red and green channels. For automatic registration of scanning data, we control a stepping motor and divide the motor's rotational degree of freedom into micro-steps. To this end, we design a control printed circuit board for the laser and stepping motor, and use an image processing board. To compute a 3D point cloud, we obtain 200 and 400 images with laser lines and segment lines on the images at different degrees of rotation. The segmented lines are thinned for one-to-one matching of an image pixel with a 3D point.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.108-108
• /
• 2007

Inkjet printing is a non-contact and direct writing associated with a computer. In the industrial field, there have been many efforts to utilize the inkjet printing as a new way of manufacturing, especially for electronic devices. The etching resist used in this process is an organic polymer which becomes solidified when exposed to ultraviolet lights and has high viscosity of 300 cPs at ambient temperature. A piezoelectric-driven ink jet printhead is used to dispense $20-40\;{\mu}m$ diameter droplets onto the copper substrate to prevent subsequent etching. In this study, factors affecting the pattern formation such as printing resolution, jetting property, adhesion strength, etching and strip mechanism, UV pinning energy have been investigated. As a result, microscale Etch resist patterning of printed circuit board with tens of ${\mu}m$ high have been fabricated.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1998.10a
• /
• pp.439-444
• /
• 1998

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.4A
• /
• pp.350-357
• /
• 2005

DSRC provides high speed radio link between Road Side Equipment and On-Board Equipment within the narrow communication area. In this paper, a 5.8 GHz up-conversion mixer for DSRC communication system was designed and fabricated using 0.8 m SiGe HBT process technology and IF/LO/RF matching circuits, IF/LO input balun circuits, and RP output balun circuit were all integrated on chip. The chip size of fabricated mixer was $2.7mm\times1.6mm$ and the measured performance was 3.5 dB conversion gain, -12.5 dBm output IP3, 42 dB LO to If isolation, 38 dB LO to RF isolation, current consumption of 29 mA for 3.0 V supply voltage.

• Proceedings of the KIEE Conference
• /
• 2006.10d
• /
• pp.163-165
• /
• 2006

This paper presents a implementation of speed sensorless vector control algorithm of induction motor using MATLAB/SIMULINK amd dSPACE DSl104 R&D board. The estimation of rotor flux linkage and rotor speed is carried out using model reference adaptive system(MRAS) method. Estimated rotor speed is used to speed controller of induction motor. Simulation results are presented to confirm speed sensorless vector control algorithm.

• Proceedings of the KOSOMBE Conference
• /
• v.1996 no.05
• /
• pp.10-13
• /
• 1996

We have developed the digital polysomnograph system to enhance the manual sleep study. This system is composed of host PC and target board. The host computer is IBM-PC Pentium 133 MHz and the target board is PC31 (processor type: TMS320C31). These two Processors communicate with each other by dualport RAM. Target board acquire 16 channel sleep signals from the Polysomnographic system (GRASS model 78, USA) and digitize them. We used high resolution monitor$(1600{\times}1280)$ to simulate the paper-recording quality of polysomnographic signal. We also implemented the GUI based polysomnographic staging program on the windows environment. Clinicians can score the sleep stage, and edit and mark the event efficiently. Finally it can support making patient database.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.5
• /
• pp.41-46
• /
• 2023

It is very important to meet the maximum detection range in a radar system. In order to meet the maximum detection Range, the sensitivity of the received signal of the radar system must be high. In addition, the dynamic range should be wide in the radar signal processing board. To meet these requirements, the signal processing board must be designed to be robust against external and internal noise. In particular, a design is required to minimize the effect of noise generated by various switching circuits inside the board on the received radar signal. In this paper, we derive the requirements of the signal processor board to meet the radar system performance and describe the design to meet the derived requirements. In addition, the EMC design to minimize the influence of noise input from the outside or generated from the inside is described. Confirm the secured performance through the test of the manufactured board.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.1
• /
• pp.65-73
• /
• 2000

This paper deals with a design and performance analysis of a parallel signal processing system based on TMS320C67x. With an emphasis on the board-level design of the processor unit four models are proposed with different memory configurations and internal bus schemes. Several approaches to parallel processing of 2D FFT are also presented to be used for performance analysis. The performance of four board models are estimated and compared in terms of the time spent for local memory access, inter-processor communication, and inter-board communication. The results of performance analysis show that, when performance and implementation complexity are taken into account, the model with both local and shared memories is the most desirable.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.27 no.4
• /
• pp.286-292
• /
• 1991

The authors propose to use the vortex generators in order to improve of the efficiency for the cambered otter boards. The equipments and testing method of this model test was the same as the previous report. This study was tested for 6 models such as the single cambered, the V-shaped cambered and the slotted cambered otter board without and with vortex generators. The results obtained are as follows: \circled1 C sub(L) of the single cambered model otter board with vortex generators was increased about 10% in comparison with that of model without vortex generators, C sub(D) decreased 2%, and L/D increased 5~20%. \circled2 L/D of the V-shaped cambered model otter board with vortex generators was increased 10~20% in comparison with that of model without vortex generators. \circled3 C sub(L) of the two slotted cambered model otter board with vortex generators was increased about 20% within an angle of attack 25$^{\circ}$ in comparison with that of without vortex generators, C sub(D) increased 5~20%, and L/D was higher than prototype within an angle of attack 20$^{\circ}$. \circled4 The separation point of the model otter boards with vortex generators was removed back ward a little in comparison with that of the model without vortex generators. \circled5 Flow speed difference of the back side to the front side of model otter boards with vortex generators was increased a little in comparison with that of the models without vortex generators. \circled6 The size of separation zone in case of the model otter boards with vortex generators was decreased about 10% in comparison with that of the models without vortex generators.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.51 no.12
• /
• pp.571-576
• /
• 2002

This paper is to develop jumping ring system with three sensor arrays and to control levitated ring using dynamic neural mode. Placing an aluminum ring on the core and switching on an AC source causes the ring to jump in the air due to induced currents. The educational system is composed of 40th optical sensor array, encode circuit, 89C51 microprocessor and control board. The control board consists of power IC, and phase controller. Real time process is present to obtain a height of levitated ring for three different sensor arrays. Based on the educational system and the proposed dynamic neural mode, the height of levitation of the ring is controlled by reference signals. This paper focuses on real system controls using the dynamic neural mode with on line learning algorithm.