• 제목/요약/키워드: 900 MHz Band

검색결과 153건 처리시간 0.023초

900 MHz / 2.45 GHz 대역 휴대용 FRID 리더를 위한 이중 대역 원형편파 안테나 설계 (Design of a dual band circularly polarized antenna for 900 MHz / 2.45 GHz Hand-held RFID Reader)

  • 김정표;이윤복;성원모;최재훈
    • 한국전자파학회:학술대회논문집
    • /
    • 한국전자파학회 2005년도 종합학술발표회 논문집 Vol.15 No.1
    • /
    • pp.235-240
    • /
    • 2005
  • This paper presents a dual band circularly polarized microstrip patch antenna. The antenna consists of two corner truncated patches implemented in one plane and single feed point. The input signal is directly excited to the patch 2 and the patch 1 is fed from patch 2 by coupling between two patches. The antenna is operated at 900 MHz and 2.45 GHz bands and has the right hand circularly polarized radiation pattern at all. The measured gains of the antenna are 2.95 dBic at 900 MHz band and 4.6 dBic at 2.45 GHz band.

  • PDF

메타구조의 CRLH를 이용한 이중대역 전력증폭기 설계 (Design of Dual-band Power Amplifier using CRLH of Metamaterials)

  • 고승기;서철헌
    • 대한전자공학회논문지TC
    • /
    • 제47권12호
    • /
    • pp.78-83
    • /
    • 2010
  • 본 논문에서는 메타구조를 이용하여 하나의 RF GaN HEMT로 새로운 이중대역에 전력증폭기를 구현하였다. CRLH 전송선로는 이중- 대역 조절 특성을 갖는 메타물질 전송 선로를 만들 수 있다. CRLH 전송 선로의 이중 대역 동작은 전력증폭기의 정합 회로를 구현을 위하여 주파수 오프셋과 CRLH 전송 선로의 비선형 위상 기울기에 의해 얻을 수 있다. 이중대역에서 CRLH 전송 선로를 이용하여 이중대역에서 오직 2차, 3차 고조파 성분만을 조절하였다. 또한, 제안된 전력증폭기의 효율을 향상 시키기 위하여 출력 정합 회로뿐만 아니라 입력 정합회로도 고조파 조절 회로를 이용하여 구현하였다. 두 동작 주파수는 900MHz와 2140MHz로 정하였다. 전력증폭기의 측정된 출력 전력은 각각 900MHz에서 39.37dBm, 2140MHz에서 38.87 dB이다. 이 지점에서 얻은 전력효율 및 IMD는 900MHz에서 PAE 60.2%, IMD는 -23.17dBc, 2140MHz에서 PAE 67.3%, IMD -25.67dBc이다.

900MHz ZigBee System 응용 분포소자형 Band Pass Filter 설계 (Design of Distributed Band Pass Filter for 900MHz ZigBee System applications)

  • 이중근;유찬세;김동수;원광호;이우성
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2005년도 추계종합학술대회
    • /
    • pp.163-166
    • /
    • 2005
  • Multilayer LTCC technology enables RF modules to be reduced dramatically by taking advantage of the three dimension flexibility. Compared to a conventional two dimensional PCB, LTCC allows higher density, reduced size, and lower cost. In this research, BPF based on LTCC for 900MHz ZigBee application was implemented which can replace SAW filter with using the material of the Dupont9599's dielectric constant 7.8. And distributed baud pass filter for 900MHz ZigBee system applications is presented. Using resonator stripline and capacitance, 2nd order band pass filter was designed. Adjusting resonator's length and capacitance is easy to tune at accurate center frequency by shifting band because ZigBee system is using narrow bandwidth, $902MHz^{\sim}928MHz$. Also resonator has no limitation in space, so reducing size is possibile. Designed filter had I.L. 2.8dB at 915MHz and attenuation at 815MHz, 1015MHz was 16dB, 15dB, respectively. Therefore, the sharpe cut-off and good insertion loss for ZigBee system application.

  • PDF

900MHz, 2.45GHz RFID 이중 대역 마이크로스트립 패치 안테나 (Dual band microstrip patch antenna for RFID application of 900MHz and 2.45GHz)

  • 장세욱;카제미푸알리레자;김형석
    • 한국정보통신설비학회:학술대회논문집
    • /
    • 한국정보통신설비학회 2007년도 학술대회
    • /
    • pp.432-435
    • /
    • 2007
  • In this paper, a dual band microstrip patch Antenna is designed for RFID Application. The antenna shows a good performance at the frequencies, 900MHz and 2.45GHz for the radiation characteristics and input impedance matching, as well. The reflection factor is lower than -25dB and a good directivity higher than 5dB is achieved for both frequency.

  • PDF

900MHz대 FDD방식을 이용한 선내용 Tranceiver에 관한 연구 (A Study on the 900MHz FDD Tranceiver for the Vessel)

  • 송면규;조학현;김정년
    • 한국정보통신학회논문지
    • /
    • 제2권3호
    • /
    • pp.359-365
    • /
    • 1998
  • The portable two way radio telephone amongst GMDSS equipment in the vessel is very important portable wireless one for search and rescue in distress situation. Although the portable two way radio telephone must be equipped with in the vessel by IMO & RR, other kinds of wireless tranceivers are widely used to communicate with crew members who are separately appointed at bridge forecastle and poop in leaving or arriving at the port, passing through a narrow canal or voyaging in the foggy weather, Most of those wireless tranceivers except portable two way radio telephone are allocated at 27MHz band with PTT simplex system that makes crew members difficult to work effectively in the vessel. In this research 900MHz band FDD(frequency duplex division) tranceiver system is studied to help crew members in the vessel to communicate with themselves freely and to work easily meanwhile with simple operation. 900MHz band FDD tranceiver system uses one chip FM frontend IC to realize the miniaturization and downsizing of tranceiver and small size head set attached to helmet. The credibility of this research's result is highly evaluated by circuit analysis with computer aided simulation, and partly modified 900MHz band cordless phone circuit.

  • PDF

900MHz대 FDD 방식을 이용한 선내용 Tranceiver에 관한 연구 (A Study on the 900MHz FDD Tranceiver for the Vessel)

  • 김정년;조학현;송면규;김기문
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 1998년도 춘계종합학술대회
    • /
    • pp.365-370
    • /
    • 1998
  • The portable two way radio telephone amongst GMDSS equipment in the vessel is very important portable wireless one for search and rescue in distress situation. Although the portable two way radio telephone must be equipped with in the vessel by IMO RR, other kinds of wireless tranceivers are widely used to communicate with crew members who are separately appointed at bridge forecastle and poop in leaving or arriving at the port, passing through a narrow canal or voyaging in the foggy weather. Most of those wireless tranceivers except portable two way radio telephone are allocated at 27MHz band with PTT simplex system that makes crew members difficult to work effectively in the vessel. In this research 900MHz band FDD(frequency duplex division) tranceiver system is studied to help crew members in the vessel to communicate with themselves freely and to work easily meanwhile with simple operation. 900MHz band FDD tranceiver system uses one chip FM frontend IC to realize the miniaturization and downsizing of tranceiver and small size head set attached to helmet. The credibility of this research's result is highly evaluated by circuit analysis with computer aided simulation. and partly modified 900MHz band cordless phone circuit.

  • PDF

DGS를 갖는 Wi-Fi 6E 대역을 위한 삼중대역 WLAN 안테나 설계 및 제작 (Design and fAbrication of Triple Band WLAN Antenna Applicable to Wi-Fi 6E Band with DGS)

  • 박상욱;변기영;윤중한
    • 한국전자통신학회논문지
    • /
    • 제19권2호
    • /
    • pp.345-354
    • /
    • 2024
  • 본 논문에서는 WLAN 시스템에 활용 할수 있도록 DGS를 적용하여 삼중대역 안테나를 제안하였다. 제안된 안테나는 두 개의 스트립 선로와 접지면에 세 개의 영역을 삽입하여 요구하는 주파수 대역과 반사손실 특성을 얻었다. 제안된 안테나는 22.0 mm(W) × 54.9 mm(L1)의 크기와 두께(h) 1.6 mm, 그리고 비유전율이 4.4인 FR-4 기판 위에 22 mm(W6+W4+W5) × 43 mm(L1+L2+L3+L5)의 크기로 설계되었다. 제작 및 측정결과로부터, -10dB 기준으로 900 MHz 900 MHz 대역에서 108 MHz (0.908~1.016 GHz), 2.4 GHz 대역에서 360 MHz (2.276~2.636 GHz), 그리고 5.0/6.0 GHz 대역에서 2,484 MHz (4.904~7.388 GHz)의 대역폭을 얻었다. 또한 요구되는 주파수 삼중대역에서 이득과 방사패턴 특성을 측정하여 나타내었다.

능동형 RF-lD 시스템에 적용 가능한 DS/SS방식의 데이터 전송용 모뎀설계 (Design of a Data Transmitter Modem using the DS/SS for the Active RF-ID system)

  • 박영훈;김진경;백승재;곽진규;박진수
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2005년도 춘계종합학술대회
    • /
    • pp.539-542
    • /
    • 2005
  • 본 논문에서는 900MHz의 ISM대역에서 사용가능한 통신방식 중 직접확산방식의 무선데이터 송수신 시스템을 제안${\cdot}$구현하였다. 특히 송수신기 간에 양방향 통신이 가능하도록 설계함으로써 900MHz 대역의 RF-ID 시스템과 같은 능동형 시스템으로의 확장이 가능하도록 하였다.

  • PDF

900MHz 대역의 LR-WPAN에 의한 간섭영향 분석 (Analysis of Interference Effects Caused by LR-WPAN in the Frequency Band of 900MHz)

  • 강상기
    • 한국정보통신학회논문지
    • /
    • 제13권2호
    • /
    • pp.215-220
    • /
    • 2009
  • IEEE 802.15.4로 알려진 LR-WPAN(Low-Rate Wireless Personal Area Network)은 현재까지 발표된 시스템 규격 중에서 가장 USN(Ubiquitous Sensor Network)을 구현하기 적합한 시스템으로 인식되고 있다. 본 논문에서는 LR-WPAN이 900MHz 대역에서 이용되는 경우, 타 시스템에 미치는 간섭 영향을 시뮬레이션하였다. 국내의 900MHz 대역 주파수 이용 현황을 고려해보면, LR-WPAN이 RFID/USN으로 할당된 주파수를 공유해서 이용하는 것을 생각해볼 수 있다. LR-WPAN이 RFID/USN 대역을 공동으로 이용하는 경우에 대한 간섭 시뮬레이션 결과, CT1과 RFID에 미치는 간섭 확률은 각각 2.5%와 2.1%로 계산되었으며, 공공통신에 미치는 간섭영향이 없기 위해서는 약 100m 이상의 보호거리가 필요한 것으로 계산되었다.

900MHz 대역 RFID 리더기 안테나 설계 및 제작 (Design and fabrication of a RFID Reader Antenna in 900MHz Band)

  • 김찬백;박성일;고영혁
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2008년도 춘계종합학술대회 A
    • /
    • pp.125-128
    • /
    • 2008
  • 본 논문에서는 900MHz 대역의 RFID 수용이 가능한 거치형 평판 안테나를 설계, 제작하였다. 제안한 안테나는 공기의 유전율을 활용한 거치형 타입으로서 직사각형 패치 구조에 그라운드의 높이를 활용하여 대역폭을 넓게 하였으며, 동축선로 급전방식을 활용하여 최적의 상태를 나타냈다. 또한, 넓은 대역폭으로 실제 사물에 부착된 RFID 태그가 액체, 특수한 금속, 온도, 습도 등에 의해 주파수천이 현상이 발생하는 문제점을 해결할 수 있다. 설계 제작한 안테나의 대역폭은 정재파비 2이하를 기준으로 $890MHz{\sim}1000MHz$에서 11.90% 이상이다. 그리고 제안된 안테나는 원편파 안테나로 이득이 6dBi이상임을 확인하였고 축비가 2이하에서 동작하는 특성을 보였다.

  • PDF